13.060.20 饮用水 标准查询与下载

GB/T 5750-1985 生活饮用水标准检验法

本标准适用于生活饮用水的水质检验，并与GB 5749-85《生活饮用水卫生标准》相适应。

Standard examination methods for drinking water

GB 5749-1985 生活饮用水卫生标准

本标准适用于城乡供生活饮用的集中式给水（包括各单位自备的生活饮用水）和分散式给水。

Sanitary standard for drinking water

T/QGCML 4150-2024 活性氢富氢水

本文件规定了活性氢富氢水的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于直接饮用的活性氢富氢水。

Active hydrogen hydrogen rich water

GSO EN 14454:2024 防止饮用水回流污染的装置 软管接头回流防止器 DN 15 至 DN 32 H 系列 A 型

This document specifies: a) field of application; b) requirements for hose union backflow preventer; c) dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of hose union backflow preventers DN 15 to DN 32; d) test method and requirements for verifying these properties; e) marking and presentation; f) acoustics. This document specifies the characteristics of hose union backflow preventers DN 15 to DN 32 that are suit-able for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H, type A

GSO EN 14623:2024 防止饮用水回流污染的装置 具有最小圆形溢流的气隙（通过试验或测量验证） A 系列 G 型

This European Standard specifies the characteristics and the requirements of air gaps with overflow, family A, type G for nominal flow velocity not exceeding 3 m/s. Air gaps are devices for protection of potable water in water installations from pollution. This European Standard applies to air gaps in factory assembled products and to constructed air gaps in situ, and defines the physicochemical characteristics of materials of construction used for the purpose and application to ensure compliance with this document during normal working use.

Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G

GSO EN 13079:2024 防止饮用水回流污染的装置 带喷射器的气隙 A 系列 D 型

This European Standard specifies the characteristics and the requirements of air gaps with injector Family A Type D intended for protection of potable water in water installations from pollution. This standard applies to air gaps in factory assembled products and to constructed air gaps in situ, and defines the physico-chemical characteristics of materials of construction used for the purpose and application to ensure compliance with this standard during normal working use.

Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D

GSO EN 15096:2024 防止饮用水回流污染的装置 软管接头防真空阀 DN 15 至 DN 25（含 H 系列、B 型和 D 型） 通用技术规范

This document specifies: a) the field of application; b) the requirements of hose union anti vacuum valves; c) dimensional and physio-chemical properties, and properties of general hydraulic, mechanical and acoustic design of hose union anti-vacuum valves of nominal sizes DN 15 up to and including DN 25; d) marking and technical product information. This document specifies the characteristics of hose union anti-vacuum valves of nominal size DN 15 up to and including DN 25 that are suitable for use in drinking water systems at pressures up to and including 1 MPa (10 bar) and temperatures up to and including 65 °C and for 1 h at 90 °C. HB protects against back siphonage only and is installed in vertical downward flow position. HD protects against back flow and is installed in vertical downward flow position. HB and HD anti-vacuum valves are for installation exclusively at the connecting point between stop valve and hose in vertical downward flow position.

Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification

GSO EN 14455:2024 防止饮用水回流污染的装置 DN 15 至 DN 50 加压空气进气阀 L 系列、A 型和 B 型

This document specifies: a) field of application; b) requirements for pressurised air inlet valves; c) dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of pressurised air inlet valves DN 15 to DN 50; d) test procedure and requirements for verifying these properties; e) marking and presentation; f) acoustics. This document specifies the characteristics of pressurised air inlet valves DN 15 to DN 50 that are suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C.

Devices to prevent pollution by backflow of potable water - Presssurised air inlet valves DN 15 to DN 50 - Family L, type A and type B

GSO ISO 24513:2024 与饮用水供应、废水和雨水系统有关的服务活动 词汇

This document defines individual concepts that together constitute a vocabulary common to different stakeholders with interests in water service provision. It is intended to facilitate common understanding and communication on the provision and management of service activities relating to drinking water supply, wastewater and stormwater systems. The following are within the scope of this document: — definition of a vocabulary common to the different stakeholders; — definition of key elements and characteristics of the service to users; — definition of the components of drinking water supply, wastewater and stormwater systems.

Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary

GSO EN 14622:2024 防止饮用水回流污染的装置 带圆形溢流口的气隙（受限） A 系列 F 型

This European Standard specifies the characteristics and the requirements of air gaps with circular overflow (restricted) family A, type F for nominal flow velocity not exceeding 3 m/s. Air gaps are devices for protection of potable water in water installations from pollution. This document applies to air gaps in factory assembled products and to constructed air gaps in situ, and defines the physicochemical characteristics of materials of construction used for the purpose and application to ensure compliance with this document during normal working use.

Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F

T/STEI 0001-2024 健康饮用水微量元素含量要求

本文件规定了符合健康促进要求的生活饮用水、包装饮用水、天然矿泉水等健康饮用水中的微量元素含量要求。 本文件适用于对人群健康有促进作用的包装和非预包装饮用水。

Standards of trace elements in healthy drinking water

T/CNFIA 192-2024 低氘水

1  范围 2  规范性引用文件 3  术语和定义 4  技术要求

low deuterium water

T/CASME 1380-2024 纳米气泡富氢饮用水

本文件规定了纳米气泡富氢饮用水的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存和保质期。

Nano bubble hydrogen-rich healthy water

T/SWSTA 0007-2024 生活饮用水中异养菌检测 平板计数法

本文件规定了生活饮用水中异养菌平板计数法的方法原理、试剂和材料、仪器和设备、水样采集和保存、检验步骤、菌落计数及结果判读、报告方法、精密度和准确度、质量保证和质量控制、废弃物处理等内容。本文件适用于生活饮用水中异养菌菌落总数的测定，制水生产中其他过程水样可参照使用。

Determination of heterotrophic bacteria in drinking water Pour plate method

DB13/T 5450.4-2024 生活与服务业用水定额 第4部分：数据中心

Water quota for domestic and service industries Part 4: Data center

T/LNUWA 012-2024 XL-V 水处理吸附催化-吸附混凝 多功能药剂

本标准规定了水处理吸附催化-吸附混凝多功能药剂产品的类别、技术要求、试验方法、标志、包 装、运输等要求。 本标准适用于水处理吸附催化-吸附混凝多功能药剂。该产品主要用于饮用水、工业用水、污水处 理。

XL-V water treatment adsorption catalysis-adsorption coagulation multifunctional agent

T/HBSX 005-2024 低氘康养水

氢元素因所含中子数不同以致质量有别，可分为氢(氕 H ，不含中子) 、重氢(氘 D ，含 1 个中子)和超重氢(氚 T ，含 2 个中子)三种。地球上的天然水通常为氕、氘 与氧化合生成的水的混合物。其中水中氘含量不仅与水的密度、沸点、粘度、电离度、粘度、离子迁移率等理化性质关系密切，对人体器官细胞的结构和功能代谢的影响也具有明显而重要的差别，因此天然低氘水是一种宝贵的水资源。为规范天然低氘水资源的利用和开发，特提出本标准。

Low Deuterium Health Water

T/HBSX 001-2024 天然含硒包装饮用水

为规范天然含硒包装饮用水中各种成分的范围，向消费者提供健康安全的天然含硒包装饮用水，特制订本标准。

Natural selenium containing packaged drinking water

T/HBSX 006-2024 富氢康养水

氢气是目前自然界中已知的最小的双原子气体分子，是一种易燃、无色无味的气体，并具有抗氧化的作用。美国FDA认可氢气作为安全的食品添加剂。我国氢气作为食品添加剂也正式颁布国家标准，并已经用于食品的保鲜用途。氢气可以微溶于水，经过大量的实验证明了氢气添加到水中密闭包装后是安全的，可以制成新类别的饮用水。本标准提出了在符合GB 19298-2014《食品安全国家标准包装饮用水》的基础上添加食品添加剂氢气而制成的康养水。

Hydrogen-rich Health Water

T/HBSX 002-2024 天然含锶包装饮用水

为规范天然含锶包装饮用水中各种成分的范围，向消费者提供健康安全的天然含锶饮用水，特制订本标准。

Natural strontium containing packaged drinking water