91.100.25 陶瓷和陶砖瓦建筑制品 标准查询与下载

T/CSTM 00868-2023 家具用陶瓷岩板

本文件规定了家具用陶瓷岩板的术语、定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于柜类、桌类等家具使用的陶瓷岩板，不适用于厨卫家具使用的陶瓷岩板。

Porcelain slab for furniture

T/CECS 10278-2023 微晶发泡陶瓷保温装饰一体板

Microcrystalline foam ceramic insulation and decoration integrated board

T/CECS 10268-2023 陶瓷厚板

Ceramic thick plate

T/GDTC 003-2022 家居用陶瓷岩板加工应用技术规范

1 范围 2 规范性引用文件 3 术语和定义 4 分类 5 一般要求 6 技术要求 7 试验方法 8 标志、包装、运输、贮存 附录A （资料性）家居用陶瓷岩板加工应用关键生产设备 附录B （资料性）家居用陶瓷岩板加工应用专用结构胶参考文献

Machining and application technical specifications of the porcelain slab for household use

T/CECS 1193-2022 烧结复合保温砖和保温砌块墙体保温系统技术规程

本规程共分7章和3个附录，主要内容包括：总则、术语和符号、基本规定、材料、设计、施工、质量验收等。

Technical specification for sintered composite insulation brick and insulation block wall insulation system

T/CBMF 206-2022 全装修用陶瓷砖(板)

本文件规定了全装修用陶瓷砖(板)的分类和分级、技术要求、试验方法、检验规则、标记和说明以及包装、运输和贮存。 本文件适用于全装修用陶瓷砖(板)。

Ceramic tiles (board) for full decoration

ASTM C1091-03a(2022) 陶土管道的液体渗入和渗出的试验方法

1.1 This test method defines procedures for hydrostatic infiltration testing of new installations of vitrified clay pipe lines, to demonstrate the structural integrity of the installed line. Refer to Practice C12. 1.2 This test method is suitable for testing gravity-flow pipe lines constructed of vitrified clay pipe or combinations of clay pipe and other pipe materials. 1.3 This test method is applicable to the testing of the pipe lines only. Manholes or other structures should be tested separately. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

ASTM C479-04(2022) 玻璃化粘土衬板的标准规范

1.1 This specification establishes the criteria for the acceptance of vitrified clay liner plates used to protectively line or face pipe, culverts, abutments, structures, or appurtenances. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Vitrified Clay Liner Plates

ASTM C1190-18(2022) 镁碳和浸渍烧过的碱性砖试样位置的标准实施规程

1.1 This practice covers a procedure for preparing test specimens from magnesia-carbon and impregnated burned basic brick. This practice generally concerns preparation of test specimens from brick greater than 13 in. (33 cm) in length. These brick are mainly manufactured for use in electric arc furnaces and basic oxygen furnaces. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick

T/CZCC 001-2022 地铺石瓷砖

paving stone tiles

T/CBCSA 35-2022 陶瓷厚砖

本文件规定了陶瓷厚砖的术语和定义、分类及规格、要求、试验方法、检验规则、标志和包装、运输和贮存。 本文件适用于室内外墙面、地面用的陶瓷厚砖。

thick ceramic tiles

T/HTC 001-2022 止滑砖

本标准规定了止滑砖的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于在干态或湿态下具有特定防滑性能要求的建筑地面用有釉防滑陶瓷砖。

Anti-slip Tile

T/HSSX 0001-2022 室外建筑用隔热陶瓷砖

本标准规定了室外建筑用隔热瓷砖的产品分类、要求、试验方法、抽样和接收条件、标记和说明、包装、运输、贮存。

Insulating Ceramic Bricks for Outdoor Buildings

T/CECS 10176-2022 超细陶瓷纤维保温装饰复合板

本标准规定了超细陶瓷纤维保温装饰复合板的术语和定义、分类与标记、一般要求、外观和性能要求、试验方法、检验规则、包装与标识、运输与贮存。

Superfine ceramic fiber thermal insulation and decorative composite board

T/CECS 1036-2022 陶瓷棉建筑保温复合板应用技术规程

主要技术内容包括：总则、术语、基本规定、性能要求、设计、施工、验收等。

Technical specification for application of ceramic wool building insulation composite board

ASTM C1167-22 粘土屋顶砖的标准规范

1.1 This specification covers clay tiles intended for use as roof covering where durability and appearance are required to provide a weather-resistant surface of specified design. 1.2 Tiles are manufactured from clay, shale, or similar naturally occurring earthy substances and subjected to heat treatment at elevated temperatures (firing). The heat treatment must develop a fired bond between the particulate constituents to provide the strength and durability requirements of this specification (see firing and fired bond in Terminology C1232). 1.3 Tiles are shaped during manufacture by molding, pressing, or extrusion and it is permitted to use the shaping method to describe the tiles. 1.4 Tiles are generally planar or undulating rectangular shapes available in a variety of cross-sectional profiles, shapes, sizes, surface textures, and colors. 1.5 Three grades of tile having various degrees of resistance to weathering are covered in this specification. Three types of tile are defined to cover the features that influence appearance. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Clay Roof Tiles

ASTM C1505-15(2022) 用三点加载法测定陶瓷砖和玻璃砖断裂强度和断裂模量的标准试验方法

1.1 This test method covers the determination of breaking strength and modulus of rupture of ceramic tiles and glass tiles by three-point loading. 1.2 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading

T/CECS 10170-2022 陶瓷透水砖

本文件规定了陶瓷透水砖的术语和定义、规格、等级和标记、技术要求、试验方法、检验规则、产品合格证、堆放和运输等。

Ceramic permeable brick

T/CBMCA 023-2021 铬渣陶瓷颜料

1、范围；2、规范性引用文件；3、术语和定义；4、要求；5、试验方法；6、检验规则；7、标志、包装、运输、贮存和随行文件。

Chrome slag ceramic pigment

T/CBMCA 022-2021 陶瓷岩板加工规范

1、范围；2、规范性引用文件；3、术语和定义；4、基本要求；5、加工准备；6、搬运；7、设计与加工；8、加工验收；9、试验方法；10、交货检验；11、标志、包装、运输、贮存和随行文件。

Specifications for processing ceramic rock slabs