91.100.25 陶瓷和陶砖瓦建筑制品 标准查询与下载

ASTM C609-20 用于测量陶瓷片之间的光反射率值和小色差的标准测试方法

1.1 This test method covers the measurement of Light Reflectance Value (LRV) and visually small color difference between pieces of glazed or unglazed ceramic tile, using any spectrophotometer that meets the requirements specified in the test method. LRV and the magnitude and direction of the color difference are expressed numerically, with sufficient accuracy for use in product specification. 1.2 LRV may be measured for either solid-colored tile or tile having a multicolored, speckled, or textured surface. For tile that are not solid-colored, an average reading should be obtained from multiple measurements taken in a pattern representative of the overall sample as described in 9.2 of this test method. Small color difference between tiles should only be measured for solid-color tiles. Small color difference between tile that have a multicolored, speckled, or textured surface are not valid. 1.3 For solid colored tile, a comparison of the test specimen and reference specimen should be made under incandescent, fluorescent and daylight illuminant conditions. The use of multiple illuminants allows the color difference measurement to be made without the risk of wrongly accepting a match when the tiles being compared are metamers (see 3.1.4). 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

ASTM C648-20 瓷砖断裂强度标准试验方法

1.1 This test method covers the determination of the breaking strength of ceramic tile, ceramic mosaic tile, quarry tile, porcelain tile and paver tile, having a facial area of at least 1 in.2 (6.4 cm2 ). Tiles may be glazed or unglazed. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Breaking Strength of Ceramic Tile

T/CBCSA 14-2020 可诱生空气负离子陶瓷砖

本标准规定了可诱生空气负离子陶瓷砖的术语和定义、分类、技术要求、试验方法、检验规则、标记和说明、包装、运输、贮存。 本标准适用于可诱生空气负离子陶瓷砖。

Induced negative air ion ceramic tiles

T/GDID 1012-2019 石墨烯发热砖

主要技术内容有术语和定义、分类、产品表示、技术要求、试验方法、检验规则、标志和说明。

Graphene heat tiles

T/CECS 628-2019 石材粘贴工程技术规程

本规程共分为6章和3个附录，主要内容包括：总则、术语、材料、设计、施工、质量验收等。

Technical specification for stone stick engineering

T/FSAS 1-2019 干压陶瓷砖

4.1　技术要求 应符合附录A、附录B、附录C、附录D、附录E的要求。 4.2　厚度 应符合表 1 的规定。 表1　干压陶瓷砖的厚度（单位为毫米） 表面积S                                   厚度值 S≤900 cm2　                       ≤10.0 900 cm2＜S≤1 800 cm2  　≤10.0 1 800 cm2＜S≤3 600 cm2　≤10.0 3 600 cm2＜S≤6 400 cm2　≤11.0 S ＞6 400 cm2　                       ≤13.5 4.3　放射性核素限量 应符合GB 6566-2010中A类装饰装修材料要求。

Dry-pressed ceramic tiles

ASTM C499-09(2019) 平面矩形陶瓷墙和地砖的面部尺寸和厚度的标准测试方法

Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

ASTM C895-87(2019) 从釉面瓷砖提取的铅和镉的标准测试方法

1.1 This test method covers the precise determination of lead and cadmium extracted by acetic acid from glazed ceramic tile that are intended for use in areas of food preparation. The procedure of extraction may be expected to accelerate the release of lead from the glaze and to serve, therefore, as a severe test that is unlikely to be matched under the actual conditions of usage of such ceramic tile. This test method is specific for lead and cadmium. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile

ASTM C650-04(2019) 瓷砖与化学物质的电阻的标准试验方法

Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

ASTM C609-07(2019) 用于测量陶瓷片之间的光反射率值和小色差的标准测试方法

Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

T/CBCSA 13-2019 烧结透水砖

本标准规定了烧结透水砖的术语和定义、分类与标记、一般规定、要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用铺设于人行道路、非承载停车场、广场等各类非硬化地面的烧结透水砖。

Sintered permeable brick

T/CBCSA 12-2019 发泡陶瓷隔墙板

本标准规定了建筑用发泡陶瓷隔墙板的术语和定义、分类与标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于一般工业与民用建筑的非承重墙体用发泡陶瓷隔墙板。

Foam ceramic partition board

ASTM C1027-19 测定釉面瓷砖可见耐磨性的标准试验方法

1.1 This test method is designed to measure the resistance of tile surfaces to visible surface abrasion. 1.2 This procedure may be used to compare tiles of like color and finish. No provisions are made for comparing tiles of dissimilar colors and/or finishes. 1.3 Certain irregular surfaces may not be evaluated properly by this test method because of wear patterns. 1.4 This procedure does not optimally evaluate loss of gloss with abrasion. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile

T/CBCSA 11-2019 陶瓷板材

本标准规定了陶瓷板材的术语和定义、分类分级、技术要求、试验方法、检验规则、标志、包装、运输、贮存和使用说明。 本标准适用于建筑室内外墙面、地面以及其它饰面类的陶瓷板材。

ceramic plate

JC/T 994-2019 微晶玻璃陶瓷复合砖

Ceramic glass ceramic composite brick

JC/T 2531-2019 陶瓷砖硬度试验方法

Ceramic tile hardness test method

JG/T 567-2019 建筑用轻质高强陶瓷板

　　现批准《建筑用轻质高强陶瓷板》为建筑工业行业产品标准，编号为JG/T567-2019，自2019年9月1日起实施。 　　本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2019年3月4日  

Lightweight high-strength ceramic panels for construction

BS EN 772-22:2018 砌体单元试验方法 粘土砌体单元抗冻融性的测定

What is BS EN 772 ‑ 22- Freeze/thaw resistance of clay masonry units about?   BS EN 772 ‑ 22 is a multi-part series of European standards which discusses the methods of test for masonry units. BS EN 772 ‑ 22 specifies a method for determining the freeze/thaw resistance of clay masonry units in one of two categories F1 or F2.   Who is BS EN 772 ‑ 22- Freeze/thaw resistance of clay masonry units for?   BS EN 772 ‑ 22 on the determination of freeze/thaw resistance of clay masonry units applies to:   Manufacturers of clay masonry bri...

Methods of test for masonry units - Determination of freeze/thaw resistance of clay masonry units

T/GHT 0001-2018 桂花陶砖

本标准规定了桂花陶砖的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输和贮存。

Osmanthus Terracotta

T/GHT 0002-2018 桂花陶瓦

本标准规定了桂花陶瓦的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输和贮存。

Osmanthus Terracotta