97.200.50 玩具 标准查询与下载

T/ZJCX 0042-2024 木制玩具通用技术规范

本文件规定了一般木制玩具生产通用技术的术语和定义与工艺流程。 本文件适用于生产产品主体是由木材制成的儿童玩具的工程资料准备、木材备料、刨光、修宽、切割、打孔、开槽、做榫、仿型、修整、雕刻、打磨、抛光、上漆、紧固件装配、组装、印刷、激光、检验、包装等各项工艺的要求。

General technical specifications for wooden toys

24/30458613 DC BS ISO 8124-4 玩具安全 第4部分：家用活动玩具

BS ISO 8124-4 Safety of toys - Part 4: Activity toys for domestic use

T/CASME 1356-2024 儿童启蒙认知玩教具要求

本文件规定了儿童启蒙认知玩教具的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺相关内容。

Requirements for children's enlightenment cognitive play teaching aids

24/30478049 DC BS EN 71-13:2021+A1:2022/A2 玩具安全 第13部分：嗅觉棋盘游戏、化妆套件和味觉游戏

BS EN 71-13:2021+A1:2022/A2 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games

GSO ISO 8124-1:2024 玩具安全 第1部分：与机械和物理性能相关的安全问题

The requirements in this document apply to all toys, i.e. any product designed or clearly intended for use in play by children under 14 years of age. They are applicable to a toy as it is initially received by the consumer and, in addition, they apply after a toy is subjected to reasonably foreseeable conditions of normal use and abuse unless specifically noted otherwise. The requirements of this document specify acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts, sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy (e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys). This document specifies requirements and test methods for toys intended for use by children in various age groups from birth to 14 years. The requirements vary according to the age group for which a particular toy is intended. The requirements for a particular age group reflect the nature of the hazards and the expected mental and/or physical abilities of a child to cope with them. This document also requires that appropriate warnings and/or instructions for use be given on certain toys or their packaging. Due to linguistic problems which may occur in different countries, the wording of these warnings and instructions is not specified but given as general information in Annex B. It should be noted that different legal requirements exist in many countries with regard to such marking. This document does not purport to cover or include every conceivable potential hazard of a particular toy or toy category. Except for labelling requirements indicating the functional hazards and the age range for which the toy is intended, this document has no requirements for those characteristics of toys which represent an inherent and recognized hazard which is integral to the function of the toy. EXAMPLE 1   An example of such a hazard is the sharp point necessary for the proper function of a needle. The needle is a hazard which is well understood by the purchaser of a toy sewing kit, and the functional sharp-point hazard is communicated to the user as part of the normal educational process of learning to sew as well as at the point of purchase by means of cautionary labelling on the product's packaging. EXAMPLE 2   As a further example, a two-wheeled toy scooter has inherent and recognized hazards associated with its use (e.g. instability during use, especially while learning). The potential hazards associated with its structural characteristics (e.g. sharp edges, pinch hazards) will be minimized by conformity to the requirements of this document. Products not included within the scope of this document are: a) bicycles, except for those considered to be toys, i.e. those having a maximum saddle height of 435 mm (see 1); b) slingshots; NOTE 1   “Slingshots” are also known as “catapults” and are usually held in the hand; examples are given in Figure 1. Toy versions of medieval catapults and trebuchets are not exempt from this document; an example is given in Figure 2. c) darts with metal points; d) public playground equipment; e) compressed air- and gas-operated guns and pistols (see 1); f) kites (except for the electric resistance of their strings, which is included); g) model kits, hobby and craft items, in which the finished item is not primarily of play value; h) sporting goods and equipment, camping goods, athletic equipment, musical instruments and furniture; however, toys which are their counterparts are included; NOTE 2   It is recognized that there is often a fine distinction between, for example, a musical instrument or a sporting item and its toy counterpart. The intention of the manufacturer or distributor, as well as normal use and reasonably foreseeable abuse, determines whether the item is a toy counterpart or not. i) models of aircraft, rockets, boats and land vehicles powered by combustion engines; however, toys which are their counterparts are included (see 1); j) collectible products not intended for children under 14 years of age; k) holiday decorations that are primarily intended for ornamental purposes; l) aquatic equipment intended to be used in deep water; m) swimming-learning devices and flotation aids for children, such as swim-seats and swim-aids; n) toys installed in public places (e.g. arcades and shopping centres); o) puzzles for specialists, for example those with more than 500 pieces and those without a picture; p) fireworks, including percussion caps, except percussion caps specifically designed for toys; q) products containing heating elements intended for use under the supervision of an adult in a teaching context; r) steam engines; s) video toys that can be connected to a video screen and operated at a nominal voltage greater than 24 V; t) babies' pacifiers (dummies); u) faithful reproductions of firearms; v) electric ovens, irons or other functional products operated at a nominal voltage greater than 24 V; w) bows for archery with an overall relaxed length exceeding 120 cm; x) fashion jewellery for children (see 1).

Safety of toys — Part 1: Safety aspects related to mechanical and physical properties

GSO EN 71-4:2024 玩具安全 第4部分：化学及相关活动实验装置

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. These substances and mixtures are: - those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1]; - substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and - any other chemical substance(s) and mixture(s) delivered with the experimental set. This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1]. This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments. This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5. NOTE The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

Safety of toys - Part 4: Experimental sets for chemistry and related activities

GSO CEN/TR 15371-2:2024 玩具安全 解释 第2部分：对 EN 71 系列化学标准解释请求的答复

The purpose of this document is to provide replies to requests for interpretations of actual chemical standards in the EN 71-series: - EN 71 3: Migration of certain elements; - EN 71 4: Experimental sets for chemistry and related activities; - EN 71 5: Chemical toys (sets) other than experimental sets; - EN 71 7: Finger paints - Requirements and test methods; - EN 71 9: Organic chemical compounds - Requirements; - EN 71 10: Organic chemical compounds - Sample preparation and extraction; - EN 71 11: Organic chemical compounds - Methods of analysis; - EN 71 12: N-Nitrosamines and N-Nitrosatable substances; - EN 71 13: Olfactory board games, cosmetic kits and gustative games.

Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series

T/SPGSX 003-2023 儿童电动童车

本标准规定了儿童电动童车的术语与定义、技术要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于电动童车产品。

children electric stroller

T/CASME 847-2023 儿童玩具磁力片技术要求

本文件规定了儿童玩具磁力片技术要求的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺等内容。

Technical requirements for magnetic sheets for children's toys

T/CASME 853-2023 玩具平衡滑步车性能检验规程

本文件规定了玩具平衡滑步车的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Toy balance scooter performance inspection regulations

T/QGCML 1996-2023 拼装积木玩具质量技术规范

本文件规定了拼装积木玩具质量技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于拼装积木玩具质量技术规范。

Technical specifications for quality of assembled building block toys

T/QGCML 2001-2023 儿童玩具益智等级评价技术规范

本文件规定了儿童玩具益智等级评价技术规范的术语和定义、技术要求。 本文件适用于设计或预定供14岁以下儿童玩耍的玩具产品，包括但不限于以下产品:电玩具、塑胶玩具、金属玩具、弹射玩具、娃娃玩具、软体填充玩具、竹木玩具、纸及纸板玩具、活动玩具(家用秋千、滑梯)、造型粘土玩具、化学实验玩具、化学套装玩具(除化学实验玩具外)、指画颜料玩具等。

Technical Specifications for Evaluation of Educational Levels of Children's Toys

T/CNLIC 0114-2023 木制玩具 质量分级

本文件规定了木制玩具的质量分级的要求，描述了相应的试验方法，确立了判定规则。 本文件适用于木制玩具的质量分级。 本文件不适用于木制的滑梯、秋千等大型活动玩具和带（电功能的玩具）电池电机的木制玩具的质量分级。

Wooden toys—Quality classification

T/CASME 801-2023 智能魔方

本文件规定了智能魔方的产品分类、结构型式、技术要求、试验方法、标志、使用说明、包装、运输和贮存。

Intelligent cube puzzles

T/JSQA 167-2023 一键收合童床 技术要求

1  材料要求 2  外观要求 3  理化性能 4  结构安全 5  附加配置的要求 6  包装 7  标识和使用说明

One click folding crib technical requirement

T/STBZ 20-2023 儿童彩妆玩具标签标识编制指南

      本文件提供了儿童彩妆玩具标签标识编制的指导，包括术语和定义、基本原则、儿童彩妆部分标识的要素及要求、玩具部分标识的要素及要求、商品条码要求、标签标识示例及源数据采集、防伪标签、易码追溯。       本文件适用于儿童彩妆玩具标签标识的编制，不适用于玩具化妆品。

Guidelines for labeling and marking of children's cosmetics

T/QGCML 1426-2023 弹跳杆

本文件规定了弹跳杆的术语和定义、结构形式及基本参数、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于3～14周岁的儿童玩耍的弹跳杆。

Bounce bar

ASTM F2291-23a 游乐设施和设备设计标准实施规程

1.1  This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2 . 1.2  This practice shall not apply to: 1.2.1  Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats); 1.2.2  Artificial climbing walls; 1.2.3  Air-supported structures; 1.2.4  Dry slides; 1.2.5  Rides that are activated by a patron, deactivate automatically, do not require a restraint or restraints, and do not require the supervision or services of a trained operator to mitigate operational risks (examples: simple coin operated rides and arcade games with motion components); 1.2.6  Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices); 1.2.7  Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard; 1.2.8  Portions of an amusement ride or device unaffected by a major modification; 1.2.9  Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced; and 1.2.10  Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1  A historical summary of the amusement ride, device or major modification, and 1.2.10.2  A statement that the design is service proven or previously compliant as specified by Section 3 . 1.2.10.3  Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3  This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4  This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.5  Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6  This standard includes the following sections: Scope Section 1 Referenced Documents Section 2 Terminology Section 3 Significance and Use Section 4 General Design Criteria Section 5 Patron Restraint, Clearance Envelope, and Containment Design Criteria Section 6 Acceleration Limits Section 7 Loads and Strengths Section 8 Hydraulic Equipment for Amusement Ride and Devices Section 9 Pneumatic Systems and Components Section 10 Safety Related Control Systems Section 11 Electrical Requirements Section 12 Mechanical System and Components Section 13 Fencing, Guardrails, Handrails, Gates, and Walkways for Amusement Rides and Devices Section 14 Welding Section 15 Fasteners Section 16 Operator Controls Section 17 Documentation Section 18 Coatings Section 19 Fall Protection Section 20 Sanitation/Disinfection Section 21 Keywords Section 22 Loads and Strengths Annex A1 Patron Restraint, Clearance Envelope, and Containment Design Criteria Appendix X1 Acceleration Limits Appendix X2 Degradation Due to Environmental Conditions Appendix X3 Electrical Requirements Appendix X4 Mechanical Systems and Components Appendix X5 Fencing, Guardrails, and Handrails for Amusement Rides and Devices Appendix X6 Supervising Companion and Clearance Envelope Appendix X7 Riders Under 48 in. (1.22 m) Appendix X8 Load/Unload Area Hazard Mitigation Strategies Appendix X9 Other Acceptable Fall Protection Configurations (14.8 ) Appendix X10 Impact Events Appendix X11 Loads and Strengths Appendix X12 1.7  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Design of Amusement Rides and Devices

ASTM F2291-23b 游乐设施和设备设计的标准实施规程

Standard Practice for Design of Amusement Rides and Devices

ISO/CD 8124-4:2023 玩具安全 第 4 部分：家用活动玩具

Safety of toys — Part 4: Activity toys for domestic use