97.200.50 玩具 标准查询与下载

BS ISO 8124-6:2023 玩具安全 某些邻苯二甲酸酯

1   Scope This document specifies a method standard for the determination of di- iso -butyl phthalate (DIBP), di- n -butyl phthalate (DBP), benzyl-butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di- n -octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in toys. It can also be applied to other phthalate esters (see G.2) if adequate validation is demonstrated. This document applies to toys made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) and polyurethane (PU) plastics and some representative paint coatings (see Annex B). This document can also be applied to other product categories.

Safety of toys - Certain phthalate esters

ASTM F963-23 玩具安全标准消费者安全规范

Standard Consumer Safety Specification for Toy Safety

T/CNLIC 0110-2023 卡牌玩具

本文件规定了卡牌玩具产品的设计、材料的基本要求，以及外观、物理、化学等要求，描述了相应的试验方法，并规定了检验规则、标志、包装、运输与贮存的内容。 本文件适用于以普通双面铜版纸及 PET 复合纸为主要材料生产的供 6 岁以上儿童或成人玩耍或收藏的卡牌的设计、生产、检验和销售。

Card toy

ASTM F2291-23 游乐设施和设备设计的标准实施规程

1.1  This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2 . 1.2  This practice shall not apply to: 1.2.1  Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats), 1.2.2  Artificial climbing walls, 1.2.3  Air-supported structures, 1.2.4  dry slides, 1.2.5  coin operated rides, 1.2.6  Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices), 1.2.7  Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard, 1.2.8  Portions of an amusement ride or device unaffected by a major modification, 1.2.9  Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and 1.2.10  Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides: 1.2.10.1  A historical summary of the amusement ride, device or major modification, and 1.2.10.2  A statement that the design is service proven or previously compliant as specified by Section 3 . 1.2.10.3  Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice. 1.3  This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria. 1.4  This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.5  Units— The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Design of Amusement Rides and Devices

ISO 8124-10:2023 玩具安全 第10部分：化学及相关活动的实验装置

This document specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS);[3] — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; — any other chemical substance(s) and mixture(s) delivered with the experimental set. This document applies to experimental sets for chemistry and related activities, including chemistry sets, crystal-growing sets, carbon-dioxide-generating experimental sets and supplementary sets. This document also specifies requirements for marking, a contents list, instructions for use, eye protection and the equipment intended for carrying out the experiments. This document does not apply to combined sets, for example a combination of a chemistry set and a crystal-growing set. Requirements for certain other chemical toys are given in ISO 8124-11. See Clause A.1.

Safety of toys. - Part 10: Experimental sets for chemistry and related activities

GSO EN 71-8:2023 玩具安全 第8部分：家用活动玩具

This European Standard specifies requirements and test methods for activity toys for domestic use often attached to or incorporating a crossbeam, and similar toys intended for children under 14 years to play on or in and often intended to bear the mass of one or more children. This European Standard also specifies requirements for: - separately sold accessories for, and components of activity toys; - separately sold swing elements that are ready for use on or in combination with an activity toy; - construction packages for activity toys including components used to build activity toys according to a scheduled building instruction. The scope of this European Standard excludes: - playground equipment intended for public use dealt with in the EN 1176 series; - bow-mounted rocking activity toys such as rocking horses and similar toys, which are covered by specific requirements in EN 71 1; - toy pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool; NOTE 1 For information regarding the classification of pools as toys see European Commission guidance document No. 8 from Bibliographical Entry [1]. - pools with maximum depth of water over 400 mm measured, between the overflow level and the deepest point within the pool, without play elements covered e.g. by the EN 16582 series or EN 16927. NOTE 2 There is an enhanced risk of drowning in toy pools where the depth of water is in excess of 400 mm. - trampolines for domestic use dealt with in EN 71 14. - inflatable activity toys (except paddling pools). See also A.1.

Safety of toys - Part 8: Activity toys for domestic use

GSO ISO 8124-11:2023 玩具安全 第11部分：除实验装置以外的化学玩具（套）

This document specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are: — those classified as dangerous by the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[1]; — substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the GHS; and — any other chemical substance(s) and mixture(s) delivered with the chemical toy. Additionally, requirements are specified for markings, warnings, safety rules, contents lists, instructions for use and first aid information. This document applies to: — plaster of Paris (gypsum) moulding sets; — oven-hardening plasticised PVC modelling clay sets; — polystyrene granules sets; — embedding sets; — adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents) supplied or recommended in model sets.

Safety of toys — Part 11: Chemical toys (sets) other than experimental sets

GSO ASTM F2264:2023 无动力滑板车的标准消费者安全规范

  Scope is not provided for this standard

Standard Consumer Safety Specification for Non-Powered Scooters

GSO ASTM F2729:2023 家用恒定空气充气游乐设备的标准消费者安全规范

This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of constant air inflatable play devices for private home use intended for children aged from 2 to 12 years. It aims to reduce the risk of death and minimize serious injury to children resulting from use of constant air inflatable play devices for home use. The marking and labelling section of this specification covers constant air inflatable play devices for home use that incorporate water play features and are intended to hold water for wading or water recreational purposes.

Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use

ISO/PRF 8124-2 玩具安全 第2部分：易燃性

Safety of toys — Part 2: Flammability

ISO 8124-6:2023 玩具安全 第 6 部分：某些邻苯二甲酸酯

Safety of toys — Part 6: Certain phthalate esters

ISO 8124-2:2023 玩具安全 第 2 部分：易燃性

This document specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition. The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition. This document includes general requirements relating to all toys and specific requirements and test methods relating to the following toys, which are considered as being those presenting the greatest hazard: — toys intended to be worn on the head, such as beards, moustaches and wigs made from pile or flowing elements, masks, hoods and headdresses; however, paper and paperboard hats without embellishments or attachments are excluded; — toy disguise costumes and toys intended to be worn by a child in play; — toys intended to be entered by a child and constructed from textiles and/or polymer sheets and films; — soft-filled toys (see A.6).

Safety of toys — Part 2: Flammability

ISO/AWI 8124-4:2023 玩具安全 第 4 部分：家用活动玩具

Safety of toys — Part 4: Activity toys for domestic use

ISO/WD TR 8124-8.2:2023 玩具安全 第 8 部分：年龄测定指南

Safety of toys — Part 8: Age determination guidelines

ISO 8124-1:2022/CD Amd 1 玩具安全 第1部分：与机械和物理性能相关的安全方面 修正案 1

Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1

ISO 8124-3:2020+A1:2023 玩具安全 某些元素的迁移

Safety of toys - Migration of certain elements

ISO 8124-3:2020/Amd 1:2023 玩具安全 - 第3部分:某些元素的迁移 第1号修改单

Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay

BS EN 71-13:2021+A1:2022 玩具安全 嗅觉棋盘游戏、化妆包和味觉游戏

Safety of toys - Olfactory board games, cosmetic kits and gustative games

T/CHTOYS 001-2022 玩具产品标识规范

规定了玩具产品标识一般要求，并给出了产品标签示例和标识指南

Specification of labelling and markings of toys

T/ZJCX 0029-2022 科普益智木制玩具

本文件规定了科普益智木制玩具（以下简称木玩）的术语和定义、基本要求、技术要求、试验方法，检验规则、抽样、标识、包装、贮存、运输。 本文件适用于设计或预定供3周岁以上14周岁以下儿童玩耍或学习时使用的普及科学知识的木玩。

Popular science puzzle wooden toys