03.100.01;13.100 标准查询与下载

BS 45002-0:2018 职业健康安全管理体系.ISO 45001应用的一般准则

Occupational health and safety management systems. General guidelines for the application of ISO 45001

BIP 3094-2013 职业健康安全评价系列(OHSAS)标准和导则汇编.职业健康安全体系

The OHSAS Standards and Guidance Collection. Occupational Health and Safety Systems

TIS 18001-2011 职业健康安全管理体系.要求

Occupational health and safety management system:requirements

BS PAS 1010:2011 工作场所中社会心理风险的管理指南

This Publicly Available Specification (PAS) provides employers with guidance on good practice for the assessment and management of psychosocial risks in a workplace environment. This PAS is applicable to human resources managers and specialists, occupational health and safety managers and specialists, managers and owners of small and medium-sized enterprises (SMEs), and employee representatives. This PAS is most likely to be used by organizations that wish to: a) establish a strategy and process of psychosocial risk management to eliminate or minimize risks to personnel and other interested parties who could be exposed to psychosocial hazards associated with its activities; b) implement, maintain and continually improve the psychosocial risk management process and related practices; c) assure themselves of their conformity with their stated occupational health and safety (OH&S) and psychosocial risk policy. The guidance and recommendations in this PAS are intended to be incorporated into any OH&S management system. The extent of the application will depend on such factors as the OH&S policy of the organization, the nature of its activities and the risks and complexity of its operations.

Guidance on the management of psychosocial risks in the workplace

SS 506-2-2009 职业安全健康(OSH)管理系统.第2部分:SS 506-2009 标准第1部分的实施指南

This SS 506 : Part 2 : 2009 provides generic advice on the application of SS 506 : Part 1 : 2009. It explains the underlying principles of SS 506 : Part 1 and describes the intent, typical inputs, processes and typical outputs, against each requirement of SS 506 : Pad 1. This is to aid the understanding and implementation of SS 506 : Part 1. SS 506 : Part 2 does not create additional requirements to those specified in SS 506 : Part 1 nor does it prescribe mandatory approaches to the implementation of SS 506 : Part 1.

Occupational safety and health(OSH) management systems.Part 2:Guidelines for the implementation of SS 506:Part 1:2009

SS 506-1-2009 职业安全健康(OSH)管理系统.第1部分:要求

This SS 506 Standard specifies requirements for an occupational safety and health (OSH) management system, to enable an organisatien to control its OSH risks and improve its OSH performance It does not state specific OSH performance criteria, nor does it give detailed specifications for the design of a management system This SS 506 Standard is applicable to any organisation that wishes to: a) establish an OSH management system to eliminate or minimise risks to personnel and other interested parties who could be exposed to OSH hazards associated with its activities; b) implement, maintain and continually improve an OSH management system; c) assure itself of its conformity with its stated OSH policy; d) demonstrate conformity with this SS 506 Standard by 1) making a self-determination and self-declaration, or 2) seeking confirmation of its conformance by parties having an interest in the organisation, such as customers, or 3) seeking confirmation of its self-declaration by a party external to the organisation, or 4) seeking certification/registration of its OSH management system by an external organisation. All the requirements in this SS 506 Standard are intended to be incorporated into any OSH management system. The extent of the application will depend on such factors as the OSH policy of the organisation, the nature of its activities and the risks and complexity of its operations. This SS 506 Standard is intended to address occupational safety and health, and is not intended to address other safety and health areas such as employee well-being/wellness programs, product safety, property damage or environmental impacts

Occupational safety and health(OSH) management systems.Part 1:Requirements

LST 1952-2009 职业健康与安全管理体系指南 指南（BS 8800:2004）

Guide to Occupational Health and Safety Management Systems. Guide (BS 8800:2004)

BS 18004:2008 达到有效职业健康和安全性能指南

This British Standard provides guidance for an occupational health and safety (OH&S) management system or the OH&S elements of an organization’s overall management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system. This guidance is applicable to any organization that wishes to: establish an OH&S management system a) to control risks to personnel and other interested parties who could be exposed to OH&S hazards associated with its activities, facilities, processes or plant; b) implement, maintain and continually improve an OH&S management system; c) demonstrate commitment to good practice, including self‑regulation, and continual improvement in OH&S performance; d) assure itself of its conformity with its stated OH&S policy and with BS OHSAS 18001 by: 1) making a self-determination and self-declaration; or 2) seeking confirmation of its conformity by parties having an interest in the organization, such as customers; or 3) seeking confirmation of its self-declaration by a party external to the organization; or 4) seeking certification/registration of its OH&S management system by an external organization. All elements in this standard are intended to be incorporated into any OH&S management system and to enable an organization to incorporate OH&S within its overall management system. The extent of the application will depend on such factors as the OH&S policy of the organization, the nature of its activities and the risks and complexity of its operations. This standard is intended to address occupational health and safety, and is not intended to address other health and safety areas, such as worker wellbeing/wellness programmes, product safety, property damage or environmental impacts. This standard is intended for use by organizations of all sizes, regardless of the nature of their activities. It is intended that its application is proportional to the circumstances and needs of the particular organization. Further guidance for small and medium enterprises (SMEs) will be provided in BS 18005, a new standard in preparation.

Guide to achieving effective occupational health and safety performance

OHSAS 18002-2008 职业健康和安全管理系统.OHSAS 18001-2007实施指南

Occupational health and safety management systems - Guidelines for the implementation of OHSAS 18001:2007

BS OHSAS 18002:2008 职业保健和安全管理系统.OHSAS 18001-2007实施指南

This Occupational Health and Safety Assessment Series (OHSAS) guideline provides generic advice on the application of OHSAS 18001:2007. It explains the underlying principles of OHSAS 18001 and describes the intent, typical inputs, processes and typical outputs, against each requirement of OHSAS 18001. This is to aid the understanding and implementation of OHSAS 18001. OHSAS 18002 does not create additional requirements to those specified in OHSAS 18001 nor does it prescribe mandatory approaches to the implementation of OHSAS 18001.

Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007

BIP 2050-2008 管理安全系统方法.实施BS OHSAS 18001-2007标准

Managing Safety the Systems Way - Implementing BS OHSAS 18001:2007

BIP 2137-2007 BS OHSAS 18001:2007薄袖珍本

BS OHSAS 18001 Laminated Pocketbook

BS OHSAS 18001:2007 职业健康和安全管理体系.要求

This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system. This OHSAS Standard is applicable to any organization that wishes to: a) establish an OH&S management system to eliminate or minimize risks to personnel and other interested parties who could be exposed to OH&S hazards associated with its activities; b) implement, maintain and continually improve an OH&S management system; c) assure itself of its conformity with its stated OH&S policy; d) demonstrate conformity with this OHSAS Standard by: 1) making a self-determination and self-declaration, or 2) seeking confirmation of its conformance by parties having an interest in the organization, such as customers, or 3) seeking confirmation of its self-declaration by a party external to the organization, or 4) seeking certification/registration of its OH&S management system by an external organization. All the requirements in this OHSAS Standard are intended to be incorporated into any OH&S management system. The extent of the application will depend on such factors as the OH&S policy of the organization, the nature of its activities and the risks and complexity of its operations. This OHSAS Standard is intended to address occupational health and safety, and is not intended to address other health and safety areas such as employee wellbeing/wellness programmes, product safety, property damage or environmental impacts.

Occupational health and safety management systems – Requirements

BIP 3042-2007 BSI健康和安全快速检查

BSI Health & Safety Quick-Check

BIP 3017-2004 职业健康和安全标准和指南CE-ROM

Includes OHSAS 18001, OHSAS 18002, BS 8800 and Managing Safety the Systems Way (BIP 2050).

Occupational Health and Safety (OH&S) Standards and Guidance CD-ROM

BS 8800:2004 职业健康和安全管理系统.指南

This guide is intended to help those with responsibility for ensuring OH&S issues are managed effectively to develop and maintain their own system. This British Standard gives guidance on: a) the design and implementation of OH&S management systems; b) the evaluation of effective OH&S management with a view to continual improvement; c) the relationships to and integration of an OH&S management system with other management systems standards. This guide is intended for use by organizations of all sizes and regardless of the nature of their activities. It is intended that its application is proportional to the circumstances and needs of the particular organization.

Occupational health and safety management systems - Guide

NP 4397-2001 安全管理系统以及职业卫生系统．相关的规格说明

Esta Norma Portuguesa contem requisitos de um sistema de gest?o da SST, que permite a uma Organiza??o controlar os seus riscos para a SST e melhorar o seu desempenho. A presente publica??o n?o indica os critérios de desempenho específicos da SST, nem dá especifica??es detalhadas para o projecto de um sistema de gest?o. Os requisitos desta Norma Portuguesa s?o aplicáveis a qualquer organiza??o que pretenda: a) estabelecer um sistema de gest?o da SST destinado a eliminar ou minimizar o risco para os trabalhadores e para outras partes interessadas que possam estar expostos a riscos para a SST associados às suas actividades; b) implementar, manter e melhorar de forma contínua um sistema de gest?o da SST; c) assegurar-se da conformidade com a política da SST que estabelecer; d) demonstrar essa conformidade a terceiros; e) obter a certifica??o ou o reconhecimento do seu sistema de gest?o da SST por uma organiza??o externa ou; f) fazer uma auto-avalia??o e uma declara??o de conformidade com esta Norma Portuguesa. Os requisitos desta Norma Portuguesa destinam-se a sistemas de gest?o da SST. A extens?o da aplica??o dependerá de factores, tais como, a política da SST da organiza??o, a natureza das suas actividades e dos riscos e a complexidade das suas opera??es. Esta Norma Portuguesa destina-se a ser aplicada preferencialmente à Seguran?a e à Saúde do Trabalho, n?o excluindo aspectos de seguran?a de servi?os e produtos.

Occupational health and safety management systems Specification

OHSAS 18002-2000 职业健康和安全管理系统.OHSAS 18001的执行指南

OHSAS 18002 seeks to explain the underlying principles of OHSAS 18001. It describes the intent, typical inputs, processes and typical outputs, against each requirement of OHSAS 18001, to aid in the understanding and implementation of OHSAS 18001. It does not create additional requirements to those specified in OHSAS 18001 nor does it prescribe mandatory approaches to the implementation of OHSAS 18001. It is intended to address occupational health and safety (OH&S) rather than product and services safety.

Occupational health and safety management systems - Guidelines for the implementation of OHSAS 18001

OHSAS 18001-1999 职业健康和安全管理系统.规范

Occupational health and safety management systems - Specification

EP 511-1998 BSI电子手册.职业卫生和安全

Contains the fully searchable text of BS 8800, OHSAS 18001 & 2 and the new publication HB 10180 'Managing safety the systems way' on CD-ROM. Windows 95/98/2000 and NT compatible. Copy, Paste, Search and Print facilities.

BSI Electronic Book - Occupational Health and Safety