TSKgel Super-Octyl columns are packed with monodispersed 2µm spherical silica particles covalently bonded with octyl groups. The small particle size makes the Super series the highest efficiency reversed phase columns in the TSK-GEL product line. The monodispersed packing generates operational back pressures more typical of larger particles allowing the use of higher flow rates than other 2 micron packings and offers less hydrophobicity than TSKgel Super-ODS.
TSKgel Super-Octyl柱填充了单分散的2µm球形硅胶填料,共价结合了C8基团。小的粒径使Super系列成为TSK-GEL产品系列中最高效的反相柱。单分散填料产生较大粒径更典型的操作后压,可使用比其它2μm填料更高的流速,TSKgel Super-Octyl比TSKgel Super-ODS疏水性弱一些。
TSK-GEL Super-Octyl is an excellent choice for peptides, proteins, amino acids, tryptic digests, nucleotides, pharmaceutical molecules and food/beverage samples.
对于多肽、蛋白质、氨基酸、酶解产物、核苷酸、药物分子、食品/饮料样品,TSK-GEL Super-Octyl是非常优秀的选择。
构造:
填料的物理特性:
孔径: | 140Å |
排除限界分子量 | 20,000 Da |
封端: | 是 |
粒径: | 2μm |
pH 范围: | 2.0 - 7.5 |
官能基: | C8(聚合物结合化学) |
碳素含量 | 5% |
比表面积 |
应用实例
在TSKgel Super-Octyl柱上快速分离蛋白混合物
关于:2μm Super 系列反相硅胶柱(110Å)
TSK-GEL Super-ODS、Super-辛基和Super-苯基柱均由2µm球形硅颗粒制备而成,孔径为140Å。柱中的硅颗粒大小非常均匀,能提供超过每米160,000塔板的柱效率,但其压降可与3µm颗粒填充柱相媲美。除谱带增宽作用降低而产生的灵敏度提高以外,Super系列的主要优势还在于节省时间和溶剂的消耗量。
注意:Super系列柱中的硅颗粒具有相对较小的空隙容积,因此会产生比其它大多数反相柱更短的保留时间。例如,为实现与TSKgel ODS-100V相似的保留时间,TSKgel Super-ODS柱的流动相有机溶剂百分比必须减少20~30%左右。.
优点:
TSK-GEL Super-ODS、Super-辛基和Super-苯基柱的区别:
(1)TSKgel Super-ODS
键合C18官能团,并彻底封端。
(2)TSKgel Super-Octyl
键合C8官能团,并彻底封端。
(3)TSKgel Super-Phenyl
键合苯基官能团,并彻底封端。
P/N | Description |
Particle size |
Housing material |
ID (mm) |
Length (cm) |
20013 | TSKgel Super-Octyl | 2μm | Stainless Steel | 2 | 5 |
20014 | TSKgel Super-Octyl | 2μm | Stainless Steel | 2 | 10 |
42176 | Guard Cartridge for P/Ns 20013, 20014 | 2μm | Stainless Steel | 2 | 1 |
19308 | Guard Cartridge holder for P/N 42176 | Stainless Steel | 2 | 1 | |
18275 | TSKgel Super-Octyl | 2μm | Stainless Steel | 4.6 | 5 |
18276 | TSKgel Super-Octyl | 2μm | Stainless Steel | 4.6 | 10 |
18207 | Guard Cartridge for P/Ns 18275,18276 | 2μm | Stainless Steel | 4 | 0.4 |
18206 | Guard Cartridge holder for P/N 18207 | Stainless Steel | 4 | 0.4 |