产品描述

锁相放大器（模块式）

LOCK-IN AMPLIFIER MODULES SERIES LIA-MV-150

◆Current and voltage input

◆Working frequency up to 45 kHz

◆Adjustable sensitivity, time constant and phase

◆Local and remote control

◆Compact and EMI-shielded case

COMPACT MODULE

In modern optoelectronic systems lock-in-amplification is one of the most useful techniques to get rid of unwanted noise and to improve the measurement sensitivity. Therefore we have created a miniaturized, powerful module operating reliably even in heavy noise environments.

TWO WAYS OF PROGRAMMING

The amplifier settings - e.g. phase, gain, time constant - are controlled either by switches directly on the amplifier module or externally using a standard digital I/O computer board. The variable working frequency is determined by an external reference signal which may be e.g. the synchronization signal of a chopper wheel or the modulation signal of a laser. The current input is well suited for amplifying signals from high impedance sources like photodiodes or PMTs while the voltage input can be used to measure signals from low impedance sources like pyros or coils.

APPLICATIONS

◆Spectroscopy

◆Laser stabilization

◆Luminescence, fluorescence, phosphorescence measurements

◆Light scattering measurements

◆Opto-electronical quality control

◆Integration in industrial and scientific measurement systems

◆OEM systems

Model	LIA-MV-150-S Standard	LIA-MV-150-D True-Differential Input
Voltage Input	BNC connector Single-ended Instrumentation amplifier Noise 12 nV/√Hz	Lemo^®connector True-differential Instrumentation amplifier Noise 12 nV/√Hz
Current Input	BNC connector Transimpedance amplifier, gain 1 kV/A Noise 4 pA/√Hz	Lemo^®connector Transimpedance amplifier, gain 1 kV/A Noise 4 pA/√Hz
Sensitivity (Full Scale)	Voltage: 3 µV to 100 mV, switchable in 1-3-10 Current: 3 nA to 100 µA, switchable in 1-3-10
Working Frequency	10 Hz - 45 kHz
Reference Input	±100 mV to ±5 V, switchable to TTL
Phase	Adjustable 0° - 360° (8-bit resolution), Temperature drift <0,01°/K
Demodulator	50 dB max. dynamic reserve
Time Constants	3 ms to 10 s, switchable in 1-3-10, slope switchable 6 dB or 12 dB/octave
Output	X [R · cos(angle)], ±10 V full scale, short-circuit protected
Digital Control	16 TTL, CMOS, opto-isolated 8 Bits phase, 4 Bits time constant, 4 Bits sensitivity
Power Supply	±15 V, 100 mA typ.
Case	170 x 60 x 30 mm (L x W x H), Weight 370 g

Power supply via 3-pin Lemo^® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.
Block Diagram LIA-MV-150

价格：面议

锁相放大器（模块式）

锁相放大器（模块式）

北京波威科技有限公司

价格：面议

锁相放大器（模块式）

产品属性

锁相放大器（模块式）

北京波威科技有限公司