Pharma test 半自动片剂测试系统 PTB 500

半自动片剂测试系统PTB500是一种双测试模式的仪器，用于测量一个样品的五个不同参数。包括片剂的硬度、直径（或长度）、厚度、宽度和重量。该仪器具有一个集成的分析天平和一个样品转盘。该仪器严格按照EP＜2.9.8＞和USP＜1217＞药典的要求制造。

• 片剂硬度测试符合USP＜1217＞和EP＜2.9.8＞药典

• 同一样品的5个结果：厚度、宽度、直径（长度）、硬度和重量（通过连接的外部分析天平）

• 具有线性速度增加和线性力增加模式的双力模式仪器

• 平均值、绝对和相对标准偏差、最  小和最大结果的统计计算

• 网络功能

• 内置多点验证程序

• 可编程打印力增加曲线

• 具有清晰操作说明的图形用户界面

• 设置为测试可用的长形和小帽的抗拉强度

The semi-automated tablet testing system PTB 500 is a dual test mode instrument to measure five different parameters of one sample. Hardness, diameter (or length), thickness, width and the weight of tablets can be determined here. The instrument features an integrated analytical balance and a sample carousel. The instrument is made in strict compliance with the EP <2.9.8> and USP <1217> Pharmacopoeia.

• Tablet hardness testing in full compliance to USP <1217> and EP <2.9.8> Pharmacopeia

•  5 results of the same sample: thickness, width, diameter (length), hardness and weight (via connected external analytical balance)

•  Dual force mode instrument with linear speed increase and linear force increases modes

• Statistical calculations of mean value, absolute and relative standard deviations, minimum and maximum result

• Networking capabilities

•  Multiple point validation procedure built-in

• Programmable print-out of force increase curve

• Graphical user interface with clear operator instructions

• Set to test tension strength of oblongs and caplets available