美国RKI六合一有毒有害气体检测仪eagle 2

Enclosure
Weatherproof, chemical resistant, anti RFI / EMI coated high impact polycarbonate - PBT
blend. Can operate in rain or be set into 2.0” of water without leakage. Ergonomically
balanced with rugged top mounted handle.
Dimensions 9.5” L x 5.25” W x 5.875” H (241mm L x 140mm W x 149mm H)
Weight 3.8 Lbs (1.72kg) (standard 4 gas with batteries)
Detection Principle Catalytic combustion, electrochemical, galvanic, infrared,
photo ionization, and thermal conductivity.
Sensor Life 2 Years under normal conditions.
Sampling Method Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet.
Flow rate approximately 2.0 SCFH
Display
Backlit 128 x 64 graphics display. Viewed through window in case top. Displays
readings & status of all 6 channels simultaneously. Backlight, illuminates for alarms and
by demand with adjustable time. Optional mode allows automatic or manual scrolling
display of just one gas at a time with very large characters.
Language Readout can display in 5 languages (English, French, German, Italian, or Spanish).
Alarms 2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully
adjustable for levels, latching or self reset, and silenceable.
Alarm Method Buzzer 95 dB at 30 cm, four high intensity LED’s.
Controls
4 External glove friendly push buttons for operation, demand zero, and autocalibration.
Buttons also access LEL/ppm, % Vol. alarm silence, peak hold, TWA/STEL values,
battery status, conversion factors, and many other features.
Continuous Operation At 70°F, (21°C) 16 hours using alkaline batteries, or 18 hours using Ni-MH.
Power Source 4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition
to prevent battery damage if charging is attempted with alkalines).
Operating Temp. &
Humidity -4°F to 122°F (-20°C to 50°C) 0 to 95% RH, non-condensing.
Response Time 30 Seconds to 90% of range (for most gases) using standard 5 ft hose.
Safety Rating
Intrinsically Safe, Class I, Division 1, Groups A, B, C, D.
Approvals:
Standard Accessories Shoulder strap, alkaline batteries, hydrophobic probe, 5 foot hose, and
internal hydrophobic filter
Optional Accessories
• Dilution fitting (50/50)
• Ni-MH batteries
• Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours)/
continuous operation adapter, 115 VAC or 12 VDC
• Extension hoses
Warranty Two year material and workmanship, one year for PID sensor