ZRS-2灼热丝试验仪

二、主要技术参数
Two, the main technical parameters
1.灼热丝温度： 500~1000℃±2℃连续可调
1 hot wire temperature: 500~1000 - 2 Deg. C can be adjusted continuously
2.灼热时间：   0-999.9s±0.1s可调 (一般选择为30s)
2 burning time: 0-999.9s + 0.1s adjustable (select for 30s)
3.起燃时间：   0-999.9s±0.1s，自动记录，手动暂停
3 /: 0-999.9s + 0.1s, automatic recording, manual pause
4.熄灭时间：   0-999.9s±0.1s，自动记录，手动暂停
4 out of time: 0-999.9s + 0.1s, automatic recording, manual pause
5.热 电 偶：Φ0.5mm进口铠装（K型）热电偶
5: 0.5mm imported armoured thermocouple (type K) thermocouple
6.灼 热 丝：Φ4 mm的镍铬丝
6: hot wire nichrome wire with the diameter of 4 mm.
7.烫入深度：7mm±0.5mm
7 hot into the depth: 7mm + 0.5mm
8.样品压力：1N±0.2N
8 sample pressure: 1N + 0.2N
9.试验速度：14mm/s 。
9 test speed: 14mm/s.
10.采用红线光电停止开关,使限位更加精准.
10 the use of the red line to stop the switch, so that the limit is more accurate.
11.可控硅控制调温系统，使温度调节更准确。
11 SCR control temperature control system, make the temperature control more accurate.
12.时间、温度数字显示，观察记录方便
12 time, temperature, digital display, easy to observe and record
13.试验背景：黑背景。
13 test background: Black background.
14.试验过程：试验程序自动控制，独立抽风
14 test: test program automatic control, independent exhaust
15.工作室体积：0.5 立方，（可根据客户要求定做不锈钢机箱、0.75
15 studio volume: 0.5 cubic meters, can be customized according to customer requirements of stainless steel chassis, 0.75
立方或 1 立方 ）
Cubic or 1 cubic meters
16.设备外尺寸：1000mm宽×650mm深×1300mm高
16 equipment outside size: 1000mm wide x 650mm deep x 1300mm high
五、适用标准
Five, applicable standards
IEC60695 UL746A IEC829 DIN695 VDE0471
UL746A IEC829 DIN695 VDE0471 IEC60695
一、使用范围
First, the scope of use
灼热丝试验仪将规定材质(Ni80/Cr20)和形状的电热丝 （Φ4 mm的镍铬丝）用大电流加热至试验温度 ( 550 ℃ ～ 960 ℃ 1mi后，以规定压力 (1.0N) 垂直灼烫试品 30s ，视试品和铺垫物是否起燃或持燃时间来测定电工电子设备成品的着火危险性；测定固体绝缘材料及其它固体可燃材料的起燃性、起燃温度 (GWIT) 、可燃性和可燃性指数 (GWFI),也适用于绝缘材料、工程塑料或其它固体可燃材料行业 。
Glow wire test instrument will provide material (Ni80/Cr20) and the shape of the heating wire (nichrome wire Phi 4 mm) with high current heating to the test temperature (550 DEG to 960 DEG 1mi, to the required pressure (1.0N) vertical burning test 30s, as the sample and bedding material whether burning or burning time to determine the fire hazard of electrical and electronic equipment products; Determination of solid insulating materials and other solid combustible materials ignition, ignition temperature (GWIT), flammable and combustible index (GWFI), is also applicable to plastic insulation materials, engineering or other solid combustible materials industry.
三、随货清单
Three, with the cargo list
说明书 份 1
Manual copy 1
燃烧箱 台 1
Combustion chamber 1
接物盘 件 1
Receiving disc 1
松木板 份 1
Pine board 1
合格证 份 1
Certificate of qualification 1
砝码（0.5N） 个 2
Weight (0.5N) 2
不锈钢量规 个 1
A 1 gauge stainless steel
排烟管 根 1
Exhaust pipe root 1
电源线 根 1
Power cord 1
保险丝 个 1
Fuse 1
四、设计标准
Four, design standards
GB/T5169.10-2006 GB5169.11 GB4706.1
GB5169.11 GB4706.1 GB/T5169.10-2006