产品描述
1480nm单模泵浦光源
1480nm Pump Light Source
PDF资料下载
产品介绍: |
1480nm泵浦光源采用高品质的多量子阱半导体激光器，内置隔离器。基于先进微处理器的控制系统，结合高精度的ATC和ACC(APC)控制电路实现了激光器高稳定地输出，同时保证了光源在操控上的快捷和直观。 |
应用领域: | 产品特点: |
C-Band 高功率EDFA | 单模高功率输出，可达500mW |
Parameters | Unit | |
Part No. | - | LQ-Pump-1480-P-PW-SP-SM |
Central wavelength | nm | 1480±2 |
Output power | mW | 100~500 |
Output power short-term stability | dB | ≤±0.05dB/15 min |
Output power long-term stability | dB | ≤±0.01dB/8 hour |
Operating mode | - | CW |
Fiber type | - | Single mode fiber or PM fiber |
Output connector | - | FC/UPC or FC/APC, etc |
Operating temperature | ℃ | 0 ~ 40 |
Storage temperature | ℃ | -20 ~ 70 |
Power supply | - | AC 110/220V±10%, 50Hz, 20W |
Dimensions (L×W×H) | mm | 90×70×19 Module; 320×220×90 Benchtop |
Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.
1. Test condition: fixed temperature, CW.
2. Test condition: temperature variation ±2℃, CW.
Order Information：
LQ-pump-980-P-PW-SP
P:Package，B-Benchtop，M-Module
PW: Output power in mW, example:100-100mW ,450-450mW
SP: Feedback protection, 0-None，1-Yes
