• Designed to test creams, lotions, ointments, and patches
• Modular design for system expansion.
• Set up for 3 sets of Franz Diffusion Cells and 3 sets of Side-by-Side Cells.
• Complete turn key system with Temperature control system (Water Heater / Circulator / Tank)

SFDC-6 Diffusion Cell Drive Console
The SFDC-6 Transdermal Diffusion Cell Drive Console is remarkably simple to operate; the system came with the water heater and all the accessories. This drive console able to operate 3 sets Franz Diffusion Cells and 3 sets of Side-by-Side Cells, the SS console top is a good working surface for preparing the samples.  For the Franz Cell, skin is mounted between the cell cap (donor) and the cell body (receptor). The dermis is bathed from below with an isotonic saline solution injected through a port provided for that purpose. For the Side-by-Side Cells, skin is mounted between 2 cells.
 
Temperature is maintained at 32 degrees C by thermostatically controlled water that enters the water jacket of the cells. Warm water supplied and circulated by two (upper and lower) manifolds that are connected to a constant temperature bath. Homogeneous distribution of temperature in the saline bathing solution is accomplished by the agitating motion of a Teflon-covered magnetic stirring bar, driven by an external magnet and mounted on a timing motor.

The SFDC-6 Drive Console has 2 zones; one is to control the stir of the Franz Cells other zone is for the Side-by-Side Cells.
SPECIFICATIONS 
Power requirements:110V - 120V  50/60 Hz or 220V - 240V 50/60 Hz 
Franz Cell drive Positions………………   3
Side-by –Side Cell drive Positions…… 3
Control Zone   …………………………………  2
          Zone 1: Franz Cell Positions
          Zone 2: Side-by-Side Cell Positions
Stirring Method: Teflon coated magnetic bar
Speed………………………………300 RPM 
Heater:………………………………700 watts 
Temperature range  ……………  25~45 °C
Temperature accuracy…………….±1