Programmable High Pressure Pump Higher Force Pump for Demanding Applications 此款注射泵针对高压需求 The new KDS 410 is a high pressure syringe pump which more than doubles the linear force available on the KDS 200 series. This extra force makes the pump ideal for delivery of fluid to reactors in chemical applications or for working with viscous fluids. The robust design of the syringe holder ensures the syringe is kept level during delivery of the fluid. It features two different types of clamping mechanisms, for both smaller and larger syringes. When the application demands a more rugged pump, select the KDS 410. The KDS 410 features two modes of operation a dispense and a withdrawal mode. It is easy to set up and use in 2 quick steps; select the type of syringe and the flow rate. The selectable flow rate is entered directly into the program and stored in memory. A volume can also be set to dispense a known amount and then shut off. 新款KDS410是高压注射泵，线性压力为普通KDS200系列的两倍以上。这种高压用于在化学反应中向反应器输送流体或处理粘性流体非常理想。注射器夹具的坚固设计，保证了注射器在注射过程中以稳定的速率来输送流体。有两种不同机械结构的夹具，大小注射器都适用。若需要高压的注射泵，那么KDS410就是zei好的选择。KDS410有注射和抽取两种模式。依照简单二步，就可快速设置使用，选择注射器类型，设置流速。流速直接输入程序并存储。注射量也可设置，注射到达设置量时会自动停止。
Features特点:
Quick set up and installation
设置快速，安装简便
High pressure syringe clamps
高压注射器夹具
Typical Accuracy 1% or better
精度1%以上
> 100 lbs linear force
>100 lbs的线性压力
Wide variety of syringes from 10 µl to 140 ml
注射器尺寸广泛，10 µl到140 ml
Wide plunger travel
柱塞行程宽
Quick fluid filling
注射液体填充快速
Power reduction mode
节电模式
Volume dispense
显示已注射量
Minimum flow rate of 0.001 µl/hr (10 µl syringe)
zei小注射速率0.001 µl/hr（用10µl注射器）
Maximum flow rate of 145.5 ml/min (140 ml syringe)
产品描述
