EOT 22GHz (25GHz) InGaAs光电探测器内置PIN光电二极管,通过光伏效应将光功率转换成电流。当通过50欧姆电阻连接到示波器时,可以测量激光器的脉宽。当通过50欧姆电阻连接到光谱分析仪时,可以测量激光器的频率响应。EOT 22GHz InGaAs光电探测器采用内置偏压电源,锂电池寿命很长。通过一根同轴电缆连接光电探测器的BNC输入口,并通过50欧姆电阻连接示波器或光谱分析仪,就足以运行。
应用
监视超快激光器的输出
监视锁模激光器的输出
高重频外差应用
时域与频域响应测试
Specificationsa | (ET-3600) | (ET-3600F) |
Detector Material | ||
Rise Time/Fall Time | ||
Responsivityb | ||
Power Supply | ||
Bandwidth | ||
Active Area Diameter | ||
Dark Current | ||
Acceptance Angle (1/2 angle) | ||
Noise Equivalent Powerc | ||
Maximum Linear CW Power | ||
Mounting (Tapped Holes) | ||
Output Connector | ||
Fiber Optic Connection |
aAll specifications apply for a 50Ω termination unless otherwise noted.
bPhotodetectors have an internal 50Ω termination. Responsivity data applicable to diode only.
cNoise Equivalent Power (NEP) is determined via open circuit output.