Volumetric Sample Cutter (MDR)

To obtain the best performance from your curemeter, it is strongly recomended that every sample is the exact volume and shape, thus ensuring that the die caverty is filled with only the correct amount flowing into the spill cavity.

The constant volume cutter operates in two distict ways:

The material is first compressed to a predetermined thickness.
The cutting action takes place, ensuring an exact and constant sample volume.

Volumetric Sample Cutter (MDR)

Specifications：
Standard： Design specification in accordance with BS EN292: Part 2
Size： 300mmW x 300mmD x 800mmH
Weight ：45Kg
Supply： Filtered Air 5 to 8.5 Bar, 75 to 125 PSI
Sample Volume (adjustable)： 1cm³ to 8cm³ (normally 4.5cm³ )
Nominal Sample Diameter： 34mm
Nominal Sample Thickness @ 4.5cm³： 5.0mm
Repeatability： 0.25%

Volumetric Sample Cutter (MDR)

To obtain the best performance from your curemeter, it is strongly recomended that every sample is the exact volume and shape, thus ensuring that the die caverty is filled with only the correct amount flowing into the spill cavity.

The constant volume cutter operates in two distict ways:

The material is first compressed to a predetermined thickness.
The cutting action takes place, ensuring an exact and constant sample volume.