仪器简介：

Cussons Autotest IV Test Facility Control and Data Management System has been purpose designed to meet the complex and demanding requirements of current test facilities engaged in both routine operations and advanced research work, as a complete system. The system utilises a powerful real time VME computer for control and data logging connected via a high speed data link to a PC for system display, programming and networking, providing the operator with a familiar interface and an essential engineering tool. The system is provided as a compact package using a conventional 19 inch mounting system for convenient installation within existing or new facilities.

技术参数：

Main System Controller : Single board computer with M68060/50MHz super-scalar 32 bit processor in tandem operation with M68360/25MHz communications processor; 16.5Mb RAM comprising - 12 MB of DRAM, 4Mb FLASH, 0.5Mb SRAM; EPROM capacity of 2Mb; 2 committed RS232D serial ports, additionally one RS232D port and one RS485 opto-isolated port; SCSI-2 interface; 10Base2 Ethernet interface; PCMCIA card adapter System Bus : VME-IEEE 1014, 16/32 bit bus structure with 15 slot J1 backplane with jumper less interrupt routing system 
Operating System : OS9 V3.0, multitasking, real time EPROM based operating system 
Communications: Ethernet 10Base2 using TCP/IP protocol for PC connection. Three RS232D serial ports for connection to external devices. One RS485 high speed serial link 
Analogue Input : 64 differential input channel A-D card; 14 bit resolution with individual channel software selectable gains of x1, x10 x100; Maximum channel sample rate 58KHz (stand-alone operation); overall gain accuracy (at G=1) ±0.008% FSR; channel acquisition rate configurable up to 100Hz for maximum 32 channels; Signal input levels ±5mV to ±10V; Analogue Output: 16 Channel D-A card; 12 bit buffered analog outputs; four selectable output ranges from 5V to ±10V (applies to all channels); maximum Settling time = 2.5mS; 16 outputs can operate at 100Hz update rate; total error ±0.06% FSR; Output load per channel up to 5mA at ±10V. 
Digital Input : 64 independent opto isolated digital channels; 24VDC contact closure or open collector inputs; 500VDC isolation from input to VME bus.

主要特点：

HARDWARE FEATURES 
♦ VME computing power provided by two Motorola processors working in tandem on one modular VME card. M68060/50MHz and M68360/25MHz 
♦ High quality VME interface cards utilised 
♦ OS9 real time multi-tasking operating system for in VME unit. 
♦ Latest high specification desk mounting PC hardware supplied as standard. 
♦ Dedicated Ethernet data link between VME unit and PC provides up to 10Mbits/sec transfer rate using TCP/ IP protocol. 
♦ Auxiliary Ethernet data connection available for connection to clients data network using TCP/IP protocol 
♦ VME unit housed in robust 6U high by 19” card frame presenting a clean front panel. All connections to the unit are made via the rear panel 
♦ Comprehensive engine test programme structure provided

SOFTWARE FEATURES 
♦ Operation and preparation of specific application schedules requiring basic computer skill’s. 
♦ System menu driven with secured access above operator level 
♦ User selectable Input and Output channel designations

♦ 16 analogue output control channels are available as standard 
♦ Control output assignments can be time structured to 
provide: 
Direct open loop control 
Closed loop control via internal 3 term control software with feed-back signals user selected from any input channel or derived parameter 
♦ Non linear input channel calibration 
♦ Direct digital pulse train inputs and analysis routines 
♦ Fully automatic or manual operation retaining data processing and alarm monitoring 
♦ Individual test cycles linked by supervisory test cycle management routine 
♦ User definable multiple level time structured alarm and message capability 
♦ Menu selectable data format 
♦ Wide parameter selection listing including derived results and recognised corrected performance data 
♦ Test log summary built in 
♦ Rolling historical data log available for analysis following shut down 
♦ Routine engine performance and cycle durability record graphics output, optionally available 
♦ Keyboard controls together with 17” colour svga display enable conventional instrumentation displays and manual controls to be dispensed with if desired, alternatively system can be integrated with optimised manual input devices.

P8100 IV 自动检测程序信息由科艺仪器有限公司为您提供，如您想了解更多关于P8100 IV 自动检测程序报价、型号、参数等信息，欢迎来电或留言咨询。