光老练试验机,SWE预衰减试验机上海泊睿科学仪器有限公司

产品描述

仪器简介：

1)PC计算机控制，中/英文软件

2)光源等级：BBA级或以上

3)试验温度：25→60℃±2℃

4)辐照度：600-1000W/m2

5)光谱标定范围：400~1100nm或300~900nm

6)执行IEC 60904-3/9, IEC 61215:2005 & Ed.3, IEC 61646:2008等标准

7)附件：

热斑架及Isc分析系统：用于确定遮光位置及遮光面积

辐照度均匀性监控系统：定时扫描

BR-PV-SSS Steady-State Solar Simulator & I-V Measure System
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008, UL 1703:2008, IEC 60904.3/9...

Test Item	Classifications	Irr. W/m²	Temp. °C	Time / Dose
Precondition	—	—	—	5~5.5KW·h/m²
Light soaking test	CCC	600~1000	50	43KW·h/m²
Hot-spot endurance test	CCB	700/800~1000	50	1 or 5h
Temperature test	—	1000	40	—
Measure of temperature coefficients	BBB	1000	20~55↑	Continuous
Performance at low irradiance	BBA	200	25	—
Performance at STC and NOCT	BBA	1000 / 800	25 / 20	—
Maximum power determination	BBA	1000	25	—

Main Technical Index:
Spectral Level: Over Class BBA
Effective Irradiation: 2000×1350mm (W×D) or more
Irradiance range: 600~1100W/m² (full lamps)
Irradiance resolution: 1W/m²
(200W/m2 at low irradiance performance test by using neutral filters or metallicscreen)
Spectral calibration range: 400~1100nm or 300~900nm
Testing temperature: 20~60°C±2°C
Irradiance and temperature control model: PLC programmable controller & PC control
Irradiance measure: by standard cell
I-V measuremen: Isc, Voc, Pm, Imp, Vmp, FF, η, Rs, Rp
Automatically generating and storing I-V-P curve
Xenon lamps matrix is arranged, optimization xenon lamps lighting fixtures angles adjustable.

Automatic non-uniformity measurement system (see right):
mechanical transmission system program control,
along the X-Y axis horizontal - longitudinal reciprocating scanning,
data acquisition and processing.
Scanning time can be set.
Measurement point more than 64 (IEC 60904-10).
automatic alarm when more than 5%.

Shading plate for hot-spot endurance test:
① Crystalline silicon module
Can satisfy the 0 ~ 100% within 5% increasing or decreasing.
② Thin-film module
1~5 pieces cell shaded plates horizontal transmission (see right)
Ordinal sequence covering 1~5 pcs cells,
according to current find Imp×99%, determine shaded plates number.
Electric control displacement shaded plates to suitable current.
Adjust the shaded plates to suitable current.
Data processing system: current automatic collection & analysis

价格：面议

光老练试验机,SWE预衰减试验机

产品属性

上海泊睿科学仪器有限公司