- 完全机动化的AFM，提供自动的laser-to-tip alignment以及快速启动。  

- 低噪音光学记录系统。 

- 真正意义上的非接触式扫描。

- 高速大范围100x100x15um 扫描器 

- 先进的闭环控制                                                

- 数字模块化控制器

Measuring modes 
●Contact AFM; 
●Semicontact AFM; 
●True Non-contact AFM; 
●LFM; 
●Conductive AFM: 
●Advanced MFM, Kelvin Probe, 
●Capacitance and EFM; 
●Advanced nanolithography and nanomanipulation capabilities; 
●STM; 
●Tuning fork AFM; 
●3D scanning imaging.

◆ Scanning range: 100um x 100um x 15um (+/-10%) 
◆Scanning type: by sample 
◆XY non-linearity: 0.03%
◆Z non-linearity: 0.1%
◆Noise: 0.1nm RMS in XY dimension in 200Hz bandwidth with capacitance sensors on;
            0.02nm RMS in XY dimension in 100Hz bandwidth with capacitancel sensors off;
           l <0.04nm RMS Z capacitance sensor in 1000Hz bandwidth
◆Digital closed loop control: for X,Y,Z axes 
◆XY resonance frequency: 7 kHz (unloaded) 
◆Z resonance frequency: 15 kHz (unloaded) 
◆Active elimination of XY phase lag,
 overshooting andl ringing results in fast scanning without any dynamic image distortion 
◆Digital filtering of Z control signal at scanner resonant frequencies results in extremely short settling time
◆ Motorized sample positioning: range - 5x5mm, positioning resolution - 1um.

 

 

 同时提供各种原子力显微镜针尖和耗材。

包括：接触式探针，轻敲（非接触）式探针，导电探针，磁性探针，超高分辨率探针，SNOM探针，HOPG，SNOM标定光栅

NT公司还提供订制服务，可根据用户的要求订制各种SPM针尖和测试标定光栅。

品质卓越。价格合理。