可编程序显微镜电动滤光片转盘 ， 转盘zei高可达 55 msec 滤光片切换速率. ( zei高可装置 10 个滤镜 , 有 25 mm , 32 mm直径滤光片可供选用 ). 可安装于显微镜的激发口(Excitation Port )或 检测口 ( Emission port ) 。 附带的控制器可同时控制 2 组滤光片转盘与3组电动快门装置。
Filter wheel  
Automatic Control of Excitation and Emission with High Precision for all Common Microscope Types 　 　

Key Features:
• High Speed filter change, 55ms between adjacent positions for the HF110 controlled via ProScan. (120ms for OptiScan).
• The ability to mount on the illumina tion or emission side of the microscope
• Large selection of adapters to fit most Illuminators
• Available for 25mm (10 position) or 32mm (8 position) filters
• Filter wheel position and shutter status are controlled via either RS232 or an optional keypad.
• Magnetic covers over the filter load position on both sides of the Filter Wheel or easy access to change filters
• Visible filter position numbers for both the light path filter and the load position filter
• Filter Wheel Stand for added stability
• Filter Wheels can be stacked together in series.
• Optional Filter Wheel Keypad

Prior ProScan II, can control 2 Filter wheels as standard and with a 4 axis chip control 3 Filter wheels. The OptiScan II controls 2 Filter wheels as standard and PCI II 3 filter wheels as standard. Adaptors for most types of microscope can be supplied, please use the configurator to identify which adaptor is required. If in any doubt please contact your local support.
High Speed Shutter  　 　
Key Features:
• The high speed shutter has a 40 Hz. maximum frequency of operation.
• The shutter can be opened and closed completely in as little as 10 ms.
• TTL pulse control.
　 　
Prior ProScan II, OptiScan II and PCI II can control 3 shutters as standard. Adaptors for most types of microscope can be supplied, please use the configurator to identify which adaptor is required. If in any doubt please contact your local support.