型号： 473nm-1342nm
品牌：CrystaLaser
产地：美国
| 产地： | 美洲 |
|---|---|
| 产地类别： | 进口 |
| 供应商性质： | 区域代理 |
| ： | |
| 价格范围： | 5万-10万 |
| 组件类别： | 其他 |
特点：
波长473nm-1342nm，功率高达3W
低噪音、单纵模、超稳定
优异的光束指向稳定性与功率稳定性
风冷
TTL调制
自由空间出射、光纤耦合出射
应用：
拉曼光谱、激光雷达、荧光光谱、共聚焦显微分析、种子激光、干涉、神经生物学、光镊、流式细胞学
| Wavelength CW output, mW Low noise option Transverse mode Beam diameter (1/e2) Beam divergence Output stability, rms Beam point stability Polarization ratio Longitudinal mode SLM available Spectrum linewidth Operating temperature Operating voltage Warm-up time Power consumption Size of laser head Size of power supply | 473 nm 150, 100, 75, 40, 25, 10, 5; Noise <3%(1Hz-5kHz) 70, 50, 25 mW; Noise <0.5%(1Hz-50MHz) TEMoo, M2<1.2 0.25 mm 3 mrad <2% over 8 hrs; Ultra-stable option: <0.25% over 24 hrs +/-0.005 mrad/C > 50 : 1 2-4 longitudinal modes Single longitudinal mode with >100m coherence length 0.1 nm, nominal; SLM version: < 10-5 nm 10 to 35 degree C 90-250 VAC or 9-20 VDC 1 minute 15 W 3 x 3 x 12 cm with a fixed 6 mm thick base plate AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm |
| Laser wavelength, nm Laser Crystal Output power, mW Output stability, rms Noise, rms Transverse mode Beam diameter (1/e2) Beam divergence Beam point stability Polarization Operating temperature Operating voltage Warm-up time Power consumption Size of laser head Size of power supply Expected laser life time | 532 nm (515 nm 523, 527, 542, 555, 561, 593 nm available) Nd:YAG, Nd:YVO4 1000, 500, 300, 200, 150, 100, 75, 50, 25, 10, 5 <2% over 8 hrs; Ultra stable option: <0.25% over 24 hrs <0.5%, 10Hz - 50MHz, for S- and L-version lasers TEMoo, M2<1.1 0.36 mm (2X beam expander, beam size 0.7 mm) 2 mrad (with a 2X beam expander, divergence 1 mrad) +/-0.005 mrad/C Linear; Polarization ratio > 50:1; or >100:1 option 10 to 35 degree C 90-250 VAC or 9-24 VDC 1 minute 15 W 3 x 3 x 12 cm with a fixed 6 mm thick base plate AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm >10,000 hours (MTBF) | ||
| Model number | GCL532-xxx-S SLM-version | GCL532-xxx-L Low noise version | GCL532-xxx Standard-version |
| Longitudinal mode Spectrum linewidth Coherence length Amplitude noise, rms | Single (SLM) <0.00001 nm >300 meters <0.5% | Several 0.1 nm 1-5 mm <0.5% | Several 0.2 nm 1-3 mm ~20% at 500kHz |
| Wavelength, nm Max TEMoo output Max SLM output option Available output option Transverse mode Beam diameter (1/e2) Beam divergence Output stability, rms Beam point stability Polarization plane Polarization ratio Amplitude noise, rms Wavefront distortion Longitudinal mode SLM version Spectrum linewidth SLM version Operating temperature Operating voltage Warm-up time Power consumption Size of laser head Size of power supply Expected life time | 1064 1053 / 1047 1342 1313 / 1319 / 946 1030 3 W 2.5 W 1.5 W 1 W 300 mW 1 W 200 mW 300 mW 200 mW 200 mW 3W, 2.5W, 2W, 1.5W, 1W, 700, 500, 300, 100, to <20 mW TEMoo, M2<1.1 0.45 mm; 2x-9x beam expander option available 3.6 mrad; Option: a 4x beam expander reduced to <1 mrad <1% over 2 hrs; Ultra-stable option: <0.25% over 24 hrs +/-0.005 mrad/deg C 1064,1047,1342 nm horizontal; 1053,1313,1319,946 nm vertical >100:1 < 1%, 10Hz - 1MHz < l/10 Several longitudinal modes with coherence length 1 - 5 mm Single longitudinal mode with >300 meters coherence length 0.3 nm, nominal; 0.1nm / 0.05nm narrow linewidth option < 10-5 nm 10 to 35 deg C 90-250 VAC or 9-24 VDC 1 minute 15 W, typical 3 x 3 x 12 cm with a fixed 6 mm thick base plate, or 3.6x5x18 cm / 3.6x7x20 cm (HxWxL) for high output lasers AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm > 10,000 hours |
