仪器简介：
Performing compression set at low temperatures without having to 
open the  deep-freezer and influence the compression set result has 
always been a problem.   

By using our EV 09 compression rig in combination with a deep-freezer
with a special lid the test can be performed without touching the test
piece. All adjustments of height and releasing the compression are 
made outside the freezer thus improving the accuracy of the test results.   


技术参数：
Technical Specification :
Low Temperature Compression Set Rig - EV 09
Range mm : 12,7
Accuracy mm : ± 0,003
Resolution mm : 0,001
Dimensions dia x h mm : 120 x 450
Weight kg : approx 6
Material : stainless steel
Temperature sensor : PT 100, 1/3 DIN
The test rig is equipped with a digital gauge which can be connected to a PC for recording of the creep.

Lab Freezer ET 03.01
ET 03 Low temperature freezer -45°C
Model : ET 03
Net volume l : 130
Insulation thickness mm : 100
Outer dimensions:
Height mm : 850
Width mm : 725
Depth mm : 655
Inside dimensions:
Height mm : 650
Width mm : 520
Depth mm : 450
Weight kg : 43
Temperature °C : -10 to - 45
Ambient temperature °C : +10 to +30
Time to reach minimum temp h : 3
Noise level dBa : < 48
Energy consumption W : 500
• Acoustic alarm
• Large temperature display
• Digital temperature controller 0,1 °C
• Handle with key lock
• Defrost water drain hole
• One stage compressor ensures high level of reliability
• Environmental friendly HC refrigerant
• 100 mm high performance insulation
• CE -marked



主要特点：
Performing compression set at low temperatures without having to open the deep-freezer and influence the compression set result has always been a problem.

By using our EV 09 compression rig in combination with a deep freezer with a special lid the test can be performed without touching the test piece.

All adjustments of height and releasing the compression are made outside the freezer thus improving the accuracy of the test results.
The EV 09 rig has a digital gauge (0,001 mm), the piston is made of titanium and the test weight is simply mounted on to the titanium piston. The sample can remain in the test rig for the whole test period and during the recovery time.

The system is a complete system with rigs, a special adapted deep freezer and logging software. The values can also be recorded manually.

Existing users of our EB 02 stress relaxations rigs can buy an addition set which converts the rig to EV 09.
This conversion kit includes a compression plate with a rod, linear bearing, spacers, weights, digital gauge with 0,001 mm resolution and software for plotting the recovery.