Temperature  
  Temperature range 4°C to 99°C
  Temperature set point precision 0.1°C
  Block uniformity (over full range) ± 0.5°C
  Temperature accuracy ± 0.5°C
  End of program cooling below ambient Yes
  
Heating/Cooling Rate  
  Maximum heating rate 4.5ºC/s
  Minimum heating rate  0.1ºC/s
  Maximum cooling rate 3.0ºC/s
  Minimum cooling rate 0.1ºC/  
  
Heated Lid  
  Heated lid enable/disable Yes
  Selectable heated lid temperature 100°C to 115°C
  Over-temperature cut-out Fixed at 145°C  
  Temperature sensor Thermistor
  Heater type Etched foil
  Heater power 33W
  Warm up time 4 min approximately  
  (ambient to 105°C)
  The heated lid will only come on if the set temperature is above 35°C
  
Programming  
  Program naming using alpha keys Yes
  Program password protection Yes
  Number of programs (3 step) 37
  Maximum number of ste  er stage 35
  Maximum number of stages per program 25
  Minimum hold time 1 sec
  Maximum hold time 18 hrs
  Incremental/decremental temperature Yes
  Incremental/decremental step hold time Yes
  Programmable ramp rate (heat or cool) Variable in 0.1°C/sec steps
  Programmable ramp rate resolution 0.1°C
  
Running Program  
  Pause button Yes
  Stop button Yes
  End of program alarm Yes
  Auto restart on power fail Yes
  
Interconnectivity  
  Connection to PC control program Yes
  Software updates from web-site Yes
  
Dimensio  
  Height 185mm
  Width 185mm
  Length 330mm
  
  
Power  
  Power consumption 230W
  
  Units marked 100V will work at any voltage between 90 and 110V.
  The performance will vary and will not necessarily meet the above typical specification at the extremes of voltage.