A/E 玻璃纤维颇尔（中国）有限公司

产品描述

用于各种空气分析的顶级玻璃纤维过滤膜，符合EPA法规推荐使用的要求为：无粘合剂的硼酸硅玻璃纤维。

● 滤材: 无粘合剂的硼酸硅玻璃纤维。
● 孔径: 1 µm (nominal)；
● 厚度: 330 µm (13 mils) ；
● 典型气溶胶截留：99.98% (按照标准 ASTM D 2986-95A, 0.3 µm DOP at 32 L/min/100 cm2滤材要求)；
● 典型空气流速（0.7 bar (70 kPa, 10 psi)）: 60 L/min/cm2 ；
● 典型水流速度（0.3 bar (30 kPa, 5 psi) ）: 250 mL/min/cm2 ；
● zei大操作温度-空气: 550 °C (1022 °F)。

A/E 玻璃纤维产品规格

Description	Type A/E	Type A/B	Type A/C
Typical Applications	Water solids testing, air monitoring, gravimetric analysis	Diagnostic applications, sample prefiltration	Cell harvesting, prefiltration, solids testing
Filter Media	Borosilicate glass without binder	Borosilicate glass without binder	Borosilicate glass without binder
Pore Size (Nominal)	1 μm	1 μm	1 μm
Typical Thickness	330 μm (13 mils)	660 μm (26 mils)	254 μm (10 mils)
Typical Water Flow Rate mL/min/cm2 at 0.3 bar (30 kPa, 5 psi)	250	124	153
Typical Air Flow Rate L/min/cm2 at 0.7 bar (70 kPa, 10 psi)	60	24	40
Maximum Operating Temperature	Air - 550 °C (1,022 °F)	Air - 550 °C (1,022 °F)	Air - 550 °C (1,022 °F)
Sterilization	Autoclavable	Autoclavable	Autoclavable
Typical Aerosol Retention*	99.98%	–	–

Description	Type A/D	Extra Thick Discs	Metrigard™ Discs	TCLP
Typical Applications with large-sized particulate	Prefiltration of solutions contaminated samples	Prefiltration of heavily	Prefiltration in systems with high particulate matter	U.S. EPA Method 1311
Filter Media	Borosilicate glass without binder	Glass fiber with acrylic binder**	Ultrafine glass fiber with acrylic binder**	Borosilicate glass without binder***
Pore Size (Nominal)	3 μm	1 μm	0.5 μm	0.7 μm
Typical Thickness	660 μm (26 mils)	1270 μm (50 mils)	330 μm (13 mils)	432 μm (17 mils)
Typical Water Flow Rate mL/min/cm2 at 0.3 bar (30 kPa, 5 psi)	649	210	80	–
Typical Air Flow Rate L/min/cm2 at 0.7 bar (70 kPa, 10 psi)	139	26	21	–
Maximum Operating Temperature	Air - 550 °C (1,022 °F)	Water - 135 °C (275 °F)	Water - 135 °C (275 °F)	N/A
Sterilization	Autoclavable	Autoclavable	Autoclavable	Autoclavable
Typical Aerosol Retention*	–	99.97%	–	–
* Following ASTM D 2986-95A 0.3 μm (DOP) at 32 L/min/100 cm2 filter media. Binder is 5% of total material. * TCLP glass fiber filters are not acid washed.

A/E 玻璃纤维产品订购信息

Type A/E Glass Fiber Discs and Sheets, 1 µm
Part Number	Description	Pkg
61628	13 mm	500/pkg
61630	25 mm	500/pkg
60097	30 mm	100/pkg
61654	35 mm	100/pkg
61652	37 mm	500/pkg
65475	42.5 mm	100/pkg
61631	47 mm	100/pkg
61632	50 mm	100/pkg
60140	55 mm	100/pkg
60012	57 mm	100/pkg
60150	63 mm	100/pkg
61665	70 mm	100/pkg
61663	76 mm	100/pkg
60010	81 mm	100/pkg
60127	82.5 mm	100/pkg
60118	85 mm	100/pkg
61664	90 mm	100/pkg
61633	102 mm	100/pkg
60115	110 mm	100/pkg
61655	124 mm	100/pkg
65476	125 mm	100/pkg
61669	127 mm	100/pkg
66559	142 mm	25/pkg
61635	142 mm	100/pkg
61675	257 mm	100/pkg
61636	265 mm	100/pkg
66560	293 mm	25/pkg
61637	293 mm	100/pkg
61638	8 x 10 in.	100/pkg
Type A/B Glass Fiber Discs and Sheets, 1 µm
66196	13 mm	100/pkg
66198	25 mm	100/pkg
66208	37 mm	100/pkg
66209	47 mm	100/pkg
66210	142 mm	25/pkg
66211	8 x 10 in.	25/pkg
Type A/C Glass Fiber Discs and Sheets, 1 µm
66213	25 mm	100/pkg
66214	37 mm	100/pkg
66215	47 mm	100/pkg
65529	70 mm	100/pkg
66216	142 mm	25/pkg
66217	8 x 10 in.	25/pkg
Type A/D Glass Fiber Discs and Sheets, 3 µm
66218	13 mm	100/pkg
66220	25 mm	100/pkg
66222	37 mm	100/pkg
66224	47 mm	100/pkg
66226	142 mm	25/pkg
66227	8 x 10 in.	25/pkg
Glass Fiber Discs with Binder, Extra Thick, 1 µm
66073	13 mm	100/pkg
66075	25 mm	100/pkg
66078	47 mm	100/pkg
66084	127 mm	50/pkg
66085	142 mm	50/pkg
66086	257 mm	25/pkg
66088	293 mm	25/pkg
Metrigard™ Glass Fiber Discs with Binder, 0.5 µm
64798	47 mm	100/pkg
64803	142 mm	100/pkg
TCLP Glass Fiber Filters
66251	13 mm	100/pkg
66258	47 mm	50/pkg
66256	90 mm	50/pkg
66259	110 mm	50/pkg
60159	115 mm	50/pkg
66257	142 mm	50/pkg
60076	293 mm	25/pkg