产品描述
| Programmable Low Power Life Tester--系统规格表 (PLPL- 200mA- 400- CP- SD) | |
| 外型尺寸 Exterior dimension | 480 * 360 * 500 cm (W*H*D)(包含突出部份) |
| 标准Channel Standard Channel | A/B 端口 各10 Channel /模块/40w (每台zei大400channel) A/B Port each 10 channel/module/40w (max 400channel/set) |
| zei大控制模块数量 Maximum control Module | 10模块/400w 10 module/400w |
| 设定方式 Method of Test setting | 设定模块方式 (开始/停止) 每模块A/B端口独立控制,可设定不同电流与参数 Set module (start/stop) ; each module A/B single control ,can set different current &data |
| 输出电压/电流范围 Output voltage/current range | 0~5V/ 0~200mA(1mA/Step)/channel |
| 操作模式 Operation mode | 定电流 CC |
| 数据取样速度与通讯界面 sample rate &com interface | 200ms (Sample to Controller) , 5sec (Sample to PC) & RS485 |
| Continuous Mode ON-OFF Mode PULSE Mode | 可选择连续输出 可选择ON-OFF脉波设定(0~999.9sec), cycle设定功能(5位数) 可选择pulse模式;peak pulse current ;1/10 duty pulse width (1mS) |
| 电流设定/zei大试验时间 Current Set/Max test time | Bias &测试电流---10CH(Bias电流设定 正电流 设定) / 9999.9Hr Bias & Test current –10CH(setting of bias positive current /test positive current setting) |
| 数据读取&连结台数 Data reading &link number of machines | 同时读取/ 记录各channel电压/电流值/板温/chamber温湿度值 zei多32台 read /record value of the voltage ¤t & temp. of channel and T/H values of each Chamber /max 32 Set |
| 输出准确度与表头分辨率 Output & indicator | 1%+-2mA & 0.1V/1mA |
| 电压/电流 值 转换图形曲线 Voltage / Current values Conversion curve | 记录电压与电流值可转换为图形曲线 record the voltage and current values of each Channel can convert the Curve |
| 电压/电流/板温 分析 Voltage /Current/Temp. Analysis | 记录 电压/电流/板温 开始 /取样/ 结束时间 Recording of the start /sample /end time of voltage/ current/ temp. |
| EXCEL报表转换 Excel report conversion | 条件设定数据, 量测数据,电压短路数据转换成EXCEL档案 Set condition data, measurement data and voltage shortage datd converted as Excel file |
| 电源 Power Source | AC110V/5A & 220V/3A , 50/60Hz |
相关药典
