03.100.50 生产、生产管理 标准查询与下载

DB44/T 2157-2019 公共场所（户外）用电设施建设及运行安全规程

本标准规定了广东省公共场所（户外）用电设施的设计、施工、验收及运行维护全过程的安全基本要求。 本标准适用于额定电压为交流1000 V 及以下的各类用电设施。

Safety regulations for the construction and operation of electric facilities in public places (outdoors)

DB44/T 2158-2019 公共场所（水下）用电设施建设及运行安全规程

本标准规定了广东省公共场所（水下）用电设施的设计、施工、验收及运行维护全过程的安全基本要求。 本标准适用于额定电压为交流220/380 V 及以下的各类用电设施。 公共场所(水下)用电设施建设及运行安全除应符合本标准外，尚应符合国家现行有关标准的规定。

Safety regulations for the construction and operation of electric facilities in public places (underwater)

DB44/T 2156-2019 公共场所（户内）用电设施建设及运行安全规程

本标准规定了广东省公共场所（户内）用电设施的设计、施工、验收及运行维护全过程的安全基本要求。 本标准适用于额定电压为交流1000 V 及以下的各类用电设施。

Safety regulations for the construction and operation of electric facilities in public places (indoors)

ASTM D5899-98(2019) 计算机材料管理系统用橡胶复合材料的标准分类系统

1.1 This classification is intended to establish a method to find compounding materials on a computer data base by both functional and chemical classification. This classification will include rubber compounding materials or ingredients normally used in formulating rubber compounds. This classification is not intended for use in rubber latex or solvent based rubber adhesive applications. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

T/SHYQ 010-2018 翡翠（A货）生产加工管理规范

本标准规定了翡翠（A货）生产加工管理规范的术语和定义、设施管理、原材料验收、生产过程控制和出厂检验控制

Specification for producing and manufacturing management of jadeite (cargo A）

T/LBLSYJ 001-2018 双孢菇种植栽培技术规范

1　范围2　规范性引用文件3　术语定义4　产地环境5　栽培季节6　菌种制作  7发酵料配方8　培养料发酵与播种方法9  主要病虫害及防治

Technical Specifications for Planting and Cultivation of Agaricus bisporus

T/HNJK 0014-2018 健康产业研究基地建设考核认定标准

下列术语和定义适用于本标准。 健康产业（养生）研究基地、健康产业（养老）研究基地、健康产业（医药）研究基地、健康产业（医疗器械）研究基地、健康产业（健康产品）研究基地、健康产业（医学）研究基地、健康产业（中医治疗）研究基地、健康产业（生物制品）研究基地、健康产业（生态农业）研究基地、健康产业（中药材种植）研究基地、健康产业（绿色食品）研究基地、健康产业（生态旅游）研究基地。 具有相对固定和稳定的基地资源、设施、场地，具有与“基地”相适应的研究内容、项目、设施设备及安全、后勤配套设施。注册资金不低于1000万元人民币。 申报健康产业（生态农业）研究基地、健康产业（中药材种植）研究基地、健康产业（绿色食品）研究基地、健康产业（生态旅游）研究基地，基地面积不低于66666.67平方米，专业技术人员不低于5人。申报其它研究基地面积不低于20000平方米；基地的专业技术人员不低于10人，申报基地产权明晰。

Standards for Certification of Construction of Health Industry Research Base

ASTM E2139-05(2018) 相同不同试验的标准试验方法

1.1 This test method describes a procedure for comparing two products. 1.2 This test method does not describe the Thurstonian modeling approach to this test. 1.3 This test method is sometimes referred to as the simpledifference test. 1.4 A same-different test determines whether two products are perceived to be the same or different overall. 1.5 The procedure of the test described in this test method consists of presenting a single pair of samples to each assessor. The presentation of multiple pairs would require different statistical treatment and it is outside of the scope of this test method. 1.6 This test method is not attribute-specific, unlike the directional difference test. 1.7 This test method is not intended to determine the magnitude of the difference; however, statistical methods may be used to estimate the size of the difference. 1.8 This test method may be chosen over the triangle or duo-trio tests where sensory fatigue or carry-over are a concern, or where a simpler task is needed. 1.9 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Same-Different Test

T/NTTIC 017-2019 南通纺织工业企业安全管理标准

安全生产管理制度、防止和减少生产安全事故、保障人民群众生命和财产安全、五双制度、十不烧、安全目标和工作计划的实施、安全员的配置、机械设备安全管理、电气设备安全管理、装卸作业安全管理、交通安全管理、季节性安全管理、高处作业安全管理、作业场所、环境安全管理、仓库安全管理（缺电器、照明的要求）、从业人员合法权益的维护、安全生产责任制、安全技术措施、安全培训教育管理、安全检查、消防安全和危险源的监控管理、尘毒作业安全管理、事故应急救援、事故调查和处理。

Nantong textile industry enterprise safety management standard

DB42/T 1322-2017 生产安全事故隐患排查治理体系建设与运行规范

Production safety accident hidden danger investigation and management system construction and operation specification

T/GDES 17-2017 合成石材产品用水评价方法

1　产品功能 2　产品水足迹组成 3　原料采集阶段 4　产品制造阶段 5　销售阶段 6　不同系统边界设置的分类 7　生命周期边界 8　评价方法

Evaluation methods of water using for agglomerated stone product

T/AHLB 001-2017 安徽省柳编企业生产管理规范

本标准规定了安徽省柳编企业生产管理规范术语和定义、基本要求、厂房和车间、人员管理、相关辅料、生产过程的控制、贮存和运输及管理制度。 本标准适用于安徽省柳编制品生产企业。

Anhui province willow enterprise production management specification

ASTM F1675-13(2017) 塑料管道 暴雨下水道和其他埋管道的生命周期成本分析标准实践

1.1 This practice establishes a procedure for using life cycle cost (LCC) analysis techniques to evaluate alternative drainage system designs, using plastic pipe that satisfy the same functional requirements. 1.2 The LCC technique measures the present value of all relevant costs to install, operate, and maintain alternative drainage systems such as engineering, construction, maintenance, rehabilitation, or replacement over a specified period of time. The practice also accommodates any remaining residual or salvage value. 1.3 The decision maker, using the results of the LCC analysis, can then identify the alternative(s) with the lowest estimated total cost based on the present value of all costs. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

T/XXRL 03-2017 高清洁柴油燃料作业安全规范

本标准规定了规定了高清洁柴油燃料作业安全规范的术语和定义、基本要求、消防、清罐、检修、装卸、调配、储存、运输、加注、使用和安全管理等要求。     本标准适用于高清洁柴油燃料加注站作业的所有从业人员的安全操作。

Safety specification for high clean diesel fuel operation

T/GDES 13-2017 生态工业园区 电镀企业用水评价方法

1　评价范围 2　评价周期 3　用水计量 4　水平衡测试 5　用水指标 6　用水管理

Evaluation methods of water using for electroplating industry in eco-industrial park

T/GDES 14-2017 生态工业园区 家具五金 电镀产品用水评价方法

1　产品功能 2　产品水足迹组成 3　原料采集阶段 4　产品制造阶段 5　销售阶段 6　不同系统边界设置的分类 7　生命周期边界 8　评价方法

Evaluation methods of water using for furniture electroplating product in eco-industrial park

DB13/T 2487-2017 特种设备检验检测安全作业规范

Special equipment inspection and testing safety operation specification

EN 61882:2016 危险和可操作性研究（HAZOP 研究） 应用指南

IEC 61882:2016 is available as IEC 61882:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 61882:2016 provides a guide for HAZOP studies of systems using guide words. It gives guidance on application of the technique and on the HAZOP study procedure, including definition, preparation, examination sessions and resulting documentation and follow-up. Documentation examples, as well as a broad set of examples encompassing various applications, illustrating HAZOP studies are also provided. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - clarification of terminology as well as alignment with terms and definitions within ISO 31000:2009 and ISO Guide 73:2009; - addition of an improved case study of a procedural HAZOP. Keywords: HAZOP, risks and operability problems

Hazard and operability studies (HAZOP studies) - Application guide

DB12/T 625-2016 生产经营单位安全生产应急管理档案要求

本标准适用于生产经营单位安全生产应急档案的管理。 其他社会组织和单位的应急管理档案可参照执行。

Requirements for safety production emergency management archives of production and business units

ASTM E1765-16e1 应用分层次过程（AHP）对项目 产品和流程相关投资的多属性决策分析的标准实践

1.1 This practice presents a procedure for calculating and interpreting AHP scores of a project’s/product’s/process’ total overall desirability when making capital investment decisions.3 Projects include design, construction, operation, and disposal of commercial and residential buildings and other engineered structures.4 Products include materials, components, systems, and equipment.5 Processes include procurement, materials management, work flow, fabrication and assembly, quality control, and services. 1.2 In addition to monetary benefits and costs, the procedure allows for the consideration of characteristics or attributes which decision makers regard as important, but which are not readily expressed in monetary terms. Examples of such attributes that pertain to the selection among project/product/ process alternatives are: a construction projects’s building alternatives whose nonmonetary attributes are location/ accessibility, site security, maintainability, quality of the sound and visual environment, and image to the public and occupants; building products based on their economic and environmental performance; and sustainability-related issues for key construction processes that address environmental needs, while considering project safety, cost, and schedule. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1 This practice is under the jurisdiction of ASTM Committee E06 on Performance of Buildings and is the direct responsibility of Subcommittee E06.81 on Building Economics. Current edition approved March 1, 2016. Published March 2016. Originally approved in 1995. Last previous edition approved in 2011 as E1765 – 11. DOI: 10.1520/E1765-16E01. 2 For an extensive overview of MADA methods and a detailed treatment of how to apply two MADA methods (one of which is AHP) to building-related decisions, see Norris, G A., and Marshall, H.E., Multiattribute Decision Analysis: Recommended Method for Evaluating Buildings and Building Systems, National Institute of Standards and Technology, 1995. 3 This practice presents a stand-alone procedure for performing an AHP analysis. In addition, an ASTM software product for performing AHP analyses has been developed to support and facilitate use of this practice. Software to Support ASTM E1765: Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems, MNL 29, ASTM, 1998. 4 Projects also include analytical studies that identify alternative means for achieving organizational objectives as well as research and development activities that support the deployment of new products and processes. 5 Typical construction-related products for each product type are: (1) materials— concrete; (2) components—structural steel members; (3) systems—heating, ventilating, and air-conditioning system; and (4) equipment—heat pump. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes