03.120.01 质量综合 标准查询与下载

BS EN 62508:2010 人力可靠性指南

This International Standard provides guidance on the human aspects of dependability, and the human-centred design methods and practices that can be used throughout the whole system life cycle to improve dependability performance. This standard describes qualitative approaches. Examples of quantitative methods are given in Annex A. This International Standard is applicable to any area of industry where human/machine relationships exist, and is intended for use by technical personnel and their managers. This International standard is not intended to be used for certification, regulatory or contractual use.

Guidance on human aspects of dependability

DB13/T 1310-2010 旅行社质量信誉等级划分与评定

本标准规定了旅行社等级的标志、基本要求、等级的划分与评定依据、等级的划分条件和等级的评定。本标准适用于河北省内旅行社的等级划分、评定与复核。

Classification and evaluation of travel agency quality reputation

DB13/T 1312-2010 景区解说服务质量要求

本标准规定了旅游景区解说服务质量要求的术语和定义、基本要求、解说服务、服务人员要求及景区解说质量评价等各项要求。本标准适用于河北省辖区内各种类型旅游景区的解说服务。

Scenic spot interpretation service quality requirements

DB13/T 1317-2010 旅游景区服务质量规范

Service Quality Standards for Tourist Attractions

EN 62508:2010 关于可靠性的人为方面的指南

IEC 62508:2010 provides guidance on the human aspects of dependability, and the human-centred design methods and practices that can be used throughout the whole system life cycle to improve dependability performance. This standard describes qualitative approaches.

Guidance on human aspects of dependability

DS/EN 60300-3-15:2010 可靠性管理 第 3-15 部分：应用指南 系统可靠性工程

IEC 60300-3-15:2009 provides guidance for an engineering system's dependability and describes a process for realization of system dependability through the system life cycle. This standard is applicable to new system development and for enhancement of existing systems involving interactions of system functions consisting of hardware, software and human elements.This standards also applies to providers of subsystems and suppliers of products that seek system information and criteria for system integration. Methods and tools are provided for system dependability assessment and verification of results for achievement of dependability objectives.

Dependability management - Part 3-15: Application guide - Engineering of system dependability

LST EN 60300-3-15-2010 可靠性管理 第 3-15 部分：应用指南 系统可靠性工程（IEC 60300-3-15:2009）

Dependability management - Part 3-15: Application guide - Engineering of system dependability (IEC 60300-3-15:2009)

GOST R 54293-2010 产品认证的生产条件分析

Production conditions analysis for product attestation

GOST R 54049-2010 质量管理体系.GOST R ISO 9001-2008应用于航空气象服务的特殊要求

Quality management systems. Specific requirements for GOST R ISO 9001-2008 applications in aeronautical meteorological services

EN 60300-3-15:2009 可靠性管理 第 3-15 部分：应用指南 系统可靠性工程

IEC 60300-3-15:2009 provides guidance for an engineering system's dependability and describes a process for realization of system dependability through the system life cycle. This standard is applicable to new system development and for enhancement of existing systems involving interactions of system functions consisting of hardware, software and human elements.

Dependability management - Part 3-15: Application guide - Engineering of system dependability

IEC 60300-3-15:2009 可信性管理.第3-15部分:应用指南.系统可靠性工程

This part of IEC 60300 provides guidance for an engineering system’s dependability and describes a process for realization of system dependability through the system life cycle. This standard is applicable to new system development and for enhancement of existing systems involving interactions of system functions consisting of hardware, software and human elements. This standard also applies to providers of subsystems and suppliers of products that seek system information and criteria for system integration. Methods and tools are provided for system dependability assessment and verification of results for achievement of dependability objectives.

Dependability management – Part 3-15: Application guide – Engineering of system dependability

ANSI CATALOG-2008 ANSI验收标准

There are all ANSI approved standards as of 6/12/2008. Many of these ANSI approved standards that are published areavailable in electronic format (PDF) via ANSI's Electronic Standards Store (ESS) at http://webstore.ansi.org.

ANSI Approved Standards

SB/T 10477-2008 饭店枕类产品技术要求

本标准规定了饭店枕类产品的定义、要求、检验方法、检验规则、标志和包装。 本标准适用于饭店等在中国境内向消费者提供住宿及相关服务的企业中所使用的枕类产品。

Specification for hotel pillows

KS A IEC 62347-2008(2023) 系统可靠性规范指南

Guidance on system dependability specifications

KS A IEC 62347-2008(2018) 指导系统可靠性规范

Guidance on system dependability specifications

KS A IEC 62347:2008 系统可靠性标准书指南

이 국제표준은 시스템 신인성 명세서의 준비 지침서를 제공한다. 시스템 평가를 위한 과정이

Guidance on system dependability specifications

DS/EN 60300-3-4:2008 可靠性管理 第 3-4 部分：应用指南 可靠性要求规范指南

This part of IEC 60300 gives guidance on specifying the required dependability characteristics in specifications, together with specifications of procedures and criteria for verification and validation.The guidance provided includes the following:– advice on specifying quantitative and qualitative reliability, maintainability, availability and maintenance support requirements;– advice to purchasers of a system on how to ensure that the specified requirements will be fulfilled by suppliers;– advice to suppliers to help them to meet purchaser requirements.Other documents, such as legislation and governmental regulation may also place requirements on systems a

Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements

ASTM F2688-08(2014)e1 以体系为基础, 以顾客为中心的制造商质量计划标准指南

4.1 A need exists for a Quality Systems Guide that may be deployed by small to larger manufacturers that give direction on development of process-based systems that drive quality and continuous improvement. This guide does not require third party regulation, thus making it attractive to those manufacturers who are not required to have such certification. 1.1 This guide establishes recommended system-based procedures to assist fastener manufacturers and alteration distributors in the development of process controls which are intended to produce quality products in a cost effective manner. These recommended system-based procedures allow an organization to continually improve operational effectiveness.

Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

ANSI/AIAA S-102.2.11-2008 基本性能异常检测和响应分析

This Standard provides the basis for developing identification and response methods for system anomalies or faults that pose unacceptable risk. The requirements for contractors, the planning and reporting needs, along with the analytical tools are established. The linkage of this Standard to the other standards in the new family of performance-based reliability and maintainability standards is described.

Performance-Based Anomaly Detection and Response Analysis

ASTM F2688-08 系统为基础、以客户为中心的制造质量计划的标准指南

A need exists for a Quality Systems Guide that may be deployed by small to larger manufacturers that give direction on development of process-based systems that drive quality and continuous improvement. This guide does not require third party regulation, thus making it attractive to those manufacturers who are not required to have such certification.1.1 This guide establishes recommended system-based procedures to assist fastener manufacturers and alteration distributors in the development of process controls which are intended to produce quality products in a cost effective manner. These recommended system-based procedures allow an organization to continually improve operational effectiveness.

Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers