03.240 邮政服务 标准查询与下载

LST EN 14142-1-2011 邮政服务 地址数据库 第1部分：邮政地址的组成部分

Postal services - Address databases - Part 1: Components of postal addresses

DS/CEN/TR 14142-2:2011 邮政服务 地址数据库 第2部分：元素映射约定、模板设计注意事项、地址模板和再现说明

This part of the standard describes the address templates for each country, i.e. the specific way an address is formatted in each country, indicating in particular the order in which the various elements appear. The address templates may include rendition instructions, specifying how elements are to be rendered for printing. EN14142-1:2011 contains material that is not country-specific and is expected to remain stable for a significant period of time. CEN/TR14142-2:2011 contains the country specific information as well as explaining mapping conventions and design considerations that are generic in scope but are still evolving and have a current status rathe

Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions

DS/CEN/TS 16238:2011 邮政服务 机器控制和读取编码系统之间的开放接口 MC/RC 接口

This Technical Specification describes the ""Open Standard Interface between Image Processor, Machine Control and Image Controller"" (IP/MC/IC Interface) in the context of postal automation equipment. The following architectural overview is the basis for this interface standardization:It was agreed to unify the interfaces betweena) Image Processor and Image Controller,b) Image Processor and Machine Control andc) Machine Control and Image Controllerand to produce one common specification for this so-called IP/MC/IC Interface.The communication partners of this interface will be called Machine or Machine Control (MC) on the one side and Reading/Coding (RC) Sys

Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface

DIN EN 14142-1:2011 电邮服务.地址数据库.第1部分:电邮地址成分;德文版本EN 14142-1-2011

This Standard provides a dictionary of the possible components of postal addresses, together with examples of and constraints on their use.

Postal services - Address databases - Part 1: Components of postal addresses; German version EN 14142-1:2011

DS/EN 14142-1:2011 邮政服务 地址数据库 第1部分：邮政地址的组成部分

This European Standard provides a dictionary of the possible5) components of postal addresses, together with examples of and constraints on their use.This standard defines three hierarchical levels of postal address component:. segments, such as addressee specification, which correspond to major logical portions of a postal address; . constructs, such as organisation identification, which group elements within segments into units which are meaningful for human interpretation;. elements, such as organisation name or legal status, which correspond to the lowest level of constructs, i.e. those which are not themselves made up of subordinate elements, though th

Postal services - Address databases - Part 1: Components of postal addresses

NF Z17-031-1:2011 邮政业务.地址数据库.第1部分:邮寄地址的组成.

Postal services - Address databases - Part 1 : components of postal addresses.

BS DD CEN/TS 15523:2011 邮政服务.邮件提交声明

Postal services. Statement of mailing submission

PD CEN/TS 15523:2011 邮政服务.邮件提交的声明

This Technical Specification specifies a methodology that allows postal operators to define specific statements of mailing submission customised according to their environment and applications. The document defines information requirements for existing generic postal information processing applications related to major postal functions, namely operations, finance and marketing by specifically identifying the information that could be collected within the mailers domain and transmitted to the postal domain. In addition,This document defines the organisation of data into messages by describing data content, format and communication protocol suitable for communication of data originating in the mailers domain. The specification also provides a detailed analysis and recommendations for implementing application-level security threats and countermeasures particularly relevant for postal revenue protection in controlled mail entry settings. Finally,This document provides several examples of concrete statements of mailing submissions and an example of a secure communication protocol recommended for transmission of such statements. NOTE The SMS describes letter mail or flats that are submitted for distribution and would not deal explicitly with content of letters or flats whether it concerns customs or any other party that could in principle be interested in knowing the content of these mail units.

Postal Services - Statement of mailing submission

BS EN 14142-1:2011 邮政服务.地址数据库.邮政地址的构成

This standard provides a dictionary of the possible components of postal addresses, together with examples of and constraints on their use. This standard This standard defines three hierarchical levels of postal address component:  segments, such as addressee specification, which correspond to major logical portions of a postal address;  constructs, such as organisation identification, which group elements within segments into units which are meaningful for human interpretation;  elements, such as organisation name or legal status, which correspond to the lowest level of constructs, i.e. those which are not themselves made up of subordinate elements, though they may be sub-divided for technical purposes. To cover multiple occurrences and locations of elements in an address, and to be able where necessary to work with sub-divisions of element content, the standard defines a fourth level:  element sub-types, such as door type or door indicator, representing parts of conceptual elements, such as door, for database storage or to facilitate presentation, or representing multiple instances of conceptual elements for use in defining address element structures or templates. NOTE The underlying point is that elements are conceptual whereas sub-types are defined to meet technical needs such as template construction, rendition requirements, accurate representation of address instances, and matching to postal database fields. This standard further provides a methodology for the specification of postal address templates, which stipulate how a postal address is to be written, including the order in which postal address elements are to appear, required and optional elements, and the presentation or rendition of the elements, subject to constraints on the space available for that task. Languages suitable for human comprehension and computer processing of postal address templates are defined and described. It also defines a number of useful terms, such as delivery address, forwarding address, mailee and mail originator. By providing a standard dictionary of postal address components, this standard is expected to greatly facilitate the formal description of actual address representations and the definition of procedures for mapping between them. In practice, many address representations, whether in computer databases, in electronic messages or in printed or written form, combine several of the postal address components defined herein into single fields or lines. Considerable intelligence may be required in mapping between different representations, particularly where these are subject to a degree of ambiguity. This standard does not specify the length or value range of components. This standard does not cover the topic of data protection. Users of this standard are nevertheless reminded that the storage and exchange of personal data are subject to legislation in many countries. This standard may be applied only to the extent that this is compliant with such legislation.

Postal services. Address databases. Components of postal addresses

EN 14142-1:2011 邮政地址数据库.第1部分:组件的邮政地址

This standard provides a dictionary of the possible components of postal addresses, together with examples of and constraints on their use.This standard defines three hierarchical levels of postal address component: segments, such as addressee specification, which correspond to major logical portions of a postal address; constructs, such as organisation identification, which group elements within segments into units which are meaningful for human interpretation; elements, such as organisation name or legal status, which correspond to the lowest level of constructs, i.e. those which are not themselves made up of subordinate elements, though they may be sub-divided for technical purposes. To cover multiple occurrences and locations of elements in an address, and to be able where necessary to work with sub-divisions of element content, the standard defines a fourth level: element sub-types, such as door type or door indicator, representing parts of conceptual elements, such as door, for database storage or to facilitate presentation, or representing multiple instances of conceptual elements for use in defining address element structures or templates. NOTE The underlying point is that elements are conceptual whereas sub-types are defined to meet technical needs such as template construction, rendition requirements, accurate representation of address instances, and matching to postal database fields.This standard further provides a methodology for the specification of postal address templates, which stipulate how a postal address is to be written, including the order in which postal address elements are to appear, required and optional elements, and the presentation or rendition of the elements, subject to constraints on the space available for that task. Languages suitable for human comprehension and computer processing of postal address templates are defined and described. It also defines a number of useful terms, such as delivery address, forwarding address, mailee and mail originator. By providing a standard dictionary of postal address components,This standard is expected to greatly facilitate the formal description of actual address representations and the definition of procedures for mapping between them. In practice, many address representations, whether in computer databases, in electronic messages or in printed or written form, combine several of the postal address components defined herein into single fields or lines.

Postal services - Address databases - Part 1: Components of postal addresses

BS EN 14482:2010 邮政服务.国际信件邮寄用托盘.试验方法和性能要求

This European Standard specifies the performance requirements and testing methods for standard letter mail trays, as specified in the classification below. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays should be such that the performance requirements specified herein are met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this standard. This standard covers a one-size universal letter mail tray suitable for carrying C4, C5 and C6 mail: The trays are suitable for containing C4 mail stacked in a horizontal plane and for stacking C5 and C6 mail vertically.

Postal services. Trays for international letter mail. Test methods and performance requirements

DS/CEN/TS 15121-1:2011 邮政服务 混合邮件 第1部分：安全电子邮政服务（SePS）接口规范 概念、模式和操作

This document specifies a standard XML interface that will enable software applications to call a secured electronic postal service (SePS), provided by a postal service, which is based on the concepts, schemas and operations described herein.The specification provides:- a definition of standard operations which can be combined to support secured electronic postal services;- a full description of all mandatory and optional request parameters required for use of these operations;- a full description of all response elements and the detailed circumstances under which they are returned.The specification also describes the functionality and edit rules of the act

Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations

DS/CEN/TS 15121-2:2011 邮政服务 混合邮件 第2部分：安全电子邮政服务（SePS）接口规范 ECPM 服务

This document specifies a secured electronic postal service, referred to as the Electronic Postal Certification Mark (EPCM) service, which provides a chain of evidence, stored by an administration as a trusted third party, to prove the existence of an electronic event, for a certain content, at a certain date and time, and involving one or more identified parties.The service is defined by reference to the concepts, schemas and operations defined in CEN/TS 15121-1, Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations. It requires support for five core SePS operations and

Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service

DS/CEN/TS 15844-3:2011 邮政服务《信件邮件ID-tagging》第3部分：BNB-62编码规范

This part of the Technical Specification defines the representation of ID-tags as a 62-position bar-no-bar code (BNB-62) printed in fluorescent ink in area R1 on the reverse side of items.BNB-62 encoding is one of two encoding specifications supported by this Technical Specification ) for the printing of ID-tags in area R1, the other being BNB-78, which is specified in CEN/TS 15844-2.NOTE 1 Representation in the form of a 4-state code printed on the front of the item is covered in CEN/TS 15844-4 for flats and CEN/TS 15844-5 for small letters.BNB-62 encoding is authorised for use only by three issuers: An Post (Ireland), Canada Post and USPS. It should be en

Postal services – ID-tagging of letter mail items – Part 3: BNB-62 encoding specification

DS/CEN/TS 15844-2:2011 邮政服务《信件邮件的 ID 标记》第2部分：BNB-78 编码规范

This part of the Technical Specification defines the representation of ID-tags as a 78-position bar-no-bar code (BNB-78) printed in fluorescent ink in area R1 on the reverse side of items.BNB-78 encoding is one of two encoding specifications supported by this Technical Specification ) for the printing of ID-tags in area R1, the other being BNB-62, which is specified in CEN/TS 15844-3.NOTE 1 Representation in the form of a 4-state code printed on the front of the item is covered in CEN/TS 15844-4 for flats and CEN/TS 15844-5 for small letters.BNB-78 encoding supersedes the earlier specified BNB-62 encoding and shall be applied in all cases in which ID-tags a

Postal services – ID-tagging of letter mail items – Part 2: BNB-78 Encoding Specification

DS/CEN/TS 15844-1:2011 邮政服务《信件邮件的 ID 标记》第1部分：ID 标记结构、消息和二进制

This Technical Specification ) defines the information content, structure and possible printed representations of the S18 ID-tag ). This is an identifier for individual mail items which:- is globally unique;- can be applied to any item which is not already ID-tagged by any postal administration (or other issuer) which previously processed the item;NOTE 1 The S18 ID-tag provides a standard means of ID-tagging which can be applied on a world-wide basis, allowing inter-administration mail items to be encoded without risk of disruption of the automated system of the delivery post. It may be applied to any size of item.- can be read, with a high degree of reliab

Postal services – ID-tagging of letter mail items – Part 1: ID-tag structure, message and binary

DS/CEN/TS 15844-5:2011 邮政服务《信件邮件的 ID 标记》第5部分：小写字母的 4 态编码规范

This part of the Technical Specification defines the representation of ID-tags as a Postal-4i symbology 4-state bar code printed on the front side of small letters.Postal-4i symbology 4-state encoding is the only encoding specification supported by this Technical Specification 3) for the printing of ID-tags on the front of items.NOTE Representation in the form of fluorescent BNB bar codes printed on the reverse side of small letters (not flats) is covered in CEN/TS 15844-2 and CEN/TS 15844-3.

Postal services – ID-tagging of letter mail items – Part 5: 4-state encoding specification for small letters

DS/CEN/TS 15844-4:2011 邮政服务《信件邮件标识标识》第4部分：扁平国家编码规范

This part of the Technical Specification defines the representation of ID-tags as a Postal-4i symbology 4-state bar code printed on the front side of flats. Many of the provisions are applicable also to small letters and are therefore referenced by Part 5 of the specification (CEN/TS 15844-5), which covers these.Postal-4i symbology 4-state encoding is the only encoding specification supported by this Technical Specification 3) for the printing of ID-tags on the front of items.NOTE Representation in the form of fluorescent BNB bar codes printed on the reverse side of small letters (not flats) is covered in CEN/TS 15844-2 and CEN/TS 15844-3.

Postal services – ID-tagging of letter mail items – Part 4: State encoding specification for flats

DS/EN 14482:2011 邮政服务 国际信件用托盘 试验方法和性能要求

This European Standard specifies the performance requirements and testing methods for standard letter mail trays, as specified in the classification below. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays should be such that the performance requirements specified herein are met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this standard. This standard covers a one-size universal letter mail tray suitable for carrying C4, C5 and C6 mail:Table 1 - Letters (maximum accepted sizes) Height WidthC4 353 mm 250 mmC5

Postal services - Trays for international letter mail - Test methods and performance requirements

DIN CEN/TS 15844-1:2011 邮政服务.信件邮寄项目的ID标签.第1部分:ID标签结构,消息和二进制.英文版本CEN/TS 15844-1-2010

This Technical Specification defines the information content, structure and possible printed representations of the S18 ID-tag, This i s an identifier for individual mail items which:-is globally unique;-can be applied to any item which is not already ID-tagged by any posted administraltion (or other issuer) which previously processed the item.

Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary; English version CEN/TS 15844-1:2010