共找到 2040 条与 麻醉、呼吸和复苏设备 相关的标准,共 136 页
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
Anaesthetic vaporizers - Agent-specific filling systems
Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
*YY/T 1439的本部分规定了预期与15 ℃时最大标称灌充压力为25 000 kPa的气瓶相连接的汇流排压力调节器(在3.6中定义)和最大进气口压力为3 000 kPa、在管道系统中使用的管道压力调节器(在3.4中定义)的要求,压力调节器预期用于下列医用气体: --氧气; --氧化亚氮(笑气); --呼吸用空气; 二氧化碳; --氧气/氧化亚氮(笑气)的混合气; --驱动手术器械用空气; 驱动手术器械用氮气; --氧气浓缩器生产的富氧空气(93%氧)。 *YY/T 1439的本部分适用于单独的或与相关部件组装在一起的汇流排压力调节器和管道压力调节器。 YY/T 1439的本部分不适用于真空管道系统中使用的压力调节器。
Pressure regulators for use with medical gases.Part 2:Manifold and line pressure regulators
本标准规定了呼气峰值流量计(PEFM)的要求,呼气峰值流量计预期用于评价自主呼吸者的肺功能。 本标准适用于所有用于测量自主呼吸者的呼气峰值流量的设备,不论是综合肺功能设备的一部分还是单独的一个设备。
Anaesthetic and respiratory equipment.Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
本标准适用于预期和15 ℃时最大标称灌充压力为25 000 kPa,用于和下列医用气体的气瓶或气瓶组相连接的高压挠性连接:--氧气;--氧化亚氮(笑气);--呼吸用空气;--氦气;--二氧化碳;--氙气;--上述气体的混合气;--驱动手术器械用空气;--驱动手术器械用氮气;--富氧空气(93%氧)。本标准适用于预期连接气瓶或气瓶组到汇流排的高压挠性连接,汇流排包含在符合ISO 7396-1:2007的医用气体管道系统的气源内。
High-pressure flexible connections for use with medical gas systems
本标准规定了设计用于抵抗激光引燃的有套囊和无套囊的气管导管和相关材料的标记、标签和制造商提供信息的要求。
Tracheal tubes designed for laser surgery.Requirements for marking and accompanying information
Oxygen concentrator supply systems for use with medical gas pipeline systems
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical service
Ventilator paru untuk penggunaan medis - Persyaratan khusus keselamatan dasar dan kinerja esensial - Bagin 5: Resusitator darurat dengan tenaga gas
Ventilator paru - Bagian 4: Persyaratan khusus untuk resusitasi manual
Medical electrical equipment. External defibrillators. Technical requirements for governmental purchases
Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015)
ISO 10079-2:2014 specifies safety and performance requirements for medical, manually powered suction equipment intended for oro-pharyngeal suction. It covers equipment operated by foot or by hand or both. Annex C illustrates the three parts of ISO 10079 by providing a schematic for typical systems. ISO 10079-2:2014 has additional requirements for suction equipment intended for field use or transport use.
Medical suction equipment -- Part 2: Manually powered suction equipment
Scope is not provided for this standard
Lung ventilators for medical use -- Particular requirements for basic safety and essential performance -- Part 5: Gas-powered emergency resuscitators
Scope is not provided for this standard
Tracheobronchial tubes -- Sizing and marking
Scope is not provided for this standard
Oxygen concentrator supply systems for use with medical gas pipeline systems
Scope is not provided for this standard
Pressure regulators for use with medical gases -- Part 4: Low-pressure regulators
Gives requirements for the performance and safety of stand-alone gas mixers intended for medical use and for connection to a medical gas supply system.
Gas mixers for medical use -- Stand-alone gas mixers
Scope is not provided for this standard
Dentistry -- Single-use cartridges for local anaesthetics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号