共找到 1767 条与 射线照相设备 相关的标准,共 118 页
本文件描述了超声成像设备超声造影成像性能的试验条件和试验方法。本文件适用于具备造影功能的超声成像设备。本文件不适用于采用胃肠助显剂进行信号增强的超声成像设备。
Test methods for contrast-enhanced ultrasound imaging performance
本文件规定了彩色超声影像设备的要求,描述了相应的试验方法。本文件适用于彩色超声影像设备。
General technical requirements for color ultrasound imaging equipment
BS EN IEC 61267. Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics
Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging
BS IEC 63465. Calibration and quality control in the use of radionuclide calibrators
Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
BS EN IEC 61847. Ultrasonics. Surgical systems. Measurement and declaration of the basic output characteristics
BS EN IEC 61675-2. Radionuclide imaging devices. Characteristics and test conditions - Part 2. Gamma cameras for planar, wholebody, and SPECT imaging
Scope is not provided for this standard
Standard Guide for Digital Detector Array Radiography
IEC 61676:2023 is available as IEC 61676:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61676:2023 specifies the performance requirements of instruments as used in the non-invasive measurement of X-RAY tube voltage up to 150 kV and the relevant compliance tests. This document also describes the method for calibration and gives guidance for estimating the uncertainty in measurements performed under conditions different from those during calibration. Applications for such measurement are found in diagnostic radiology including mammography, computed tomography (CT), dental radiology and radioscopy. This document is not concerned with the safety aspect of such instruments. The requirements for electrical safety applying to them are contained in IEC 61010-1. IEC 61676:2023 cancels and replaces first edition published in 2002, Amendment 1:2008. This edition constitutes a technical revision. It includes an assessment of the combined standard uncertainty for the performance of a hypothetical instrument for the non-invasive measurement of the tube high voltage (in Annex A) which replaces Annex A of the edition 1.1 titled "Recommended performance criteria for the invasive divider".
Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
本文件规定了医用诊断X射线辐射防护装置及用具(以下简称防护装置)的术语、定义、要求、检验方法。本文件适用于为使用者提供的用于屏蔽或减弱医用诊断X射线辐射的防护装置。本文件不适用于穿戴式医用诊断X射线辐射防护用品。
Medical diagnostic X-ray radiation protection equipment and appliances
1 Scope This document is applicable to X- ray source assemblies and X- ray tube assemblies . NOTE 1 If, for certain medical electrical systems , special radiation fields are required such that the scope of IEC 60806 does not apply (e. g., using CT collimators with bow-tie filters), the appropriate system particular standard applies. This document specifies a method for the determination of the greatest geometrically symmetrical radiation field at a specified distance from the focal spot for which the percentage air kerma rate along the major axes of the radiation field does not fall below a permitted value. NOTE 2 In practical use air kerma or air kerma rate are the most practical physical measures to quantify X- ray patterns . In case multiple focal spots are not super-imposed, each focal spot has its own reference axis . Then the maximum radiation field can be given for each focal spot...
Determination of the maximum symmetrical radiation field of X-ray tube assemblies and X-ray source assemblies for medical diagnosis
本文件规定了探测器阵列剂量测量系统的性能和试验方法。本文件适用于探测器阵列剂量测量系统,包括探测器阵列以及配套使用的测量软件和结果分析软件。
Detector array dose measurement system performance and test methods
本文件规定了医学影像存储与传输系统软件的要求和试验方法。本文件适用于医学影像存储与传输系统软件。本文件不适用于不使用DICOM协议的影像存储与传输系统。
Special technical conditions for medical image storage and transmission system software
本文件规定了冠状动脉CT影像处理软件产品的要求和试验方法。本文件适用于冠状动脉CT影像处理软件,以及搭载此类软件的X射线计算机体层摄影设备和影像后处理工作站。
Special technical conditions for coronary CT image processing software
本文件规定了正电子发射断层成像装置数字化技术要求。本文件适用于采用数字化技术的正电子发射断层成像装置。
Digital technical requirements for positron emission tomography equipment
本文件规定了医用磁共振成像设备的要求和试验方法。本文件适用于超导型磁共振成像设备、永磁型磁共振成像设备及常导型磁共振成像设备。
General technical conditions for medical magnetic resonance imaging equipment
Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
Medical electrical equipment — X-ray tube assemblies for medical diagnosis — Focal spot dimensions and related characteristics
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号