11.160 急救 标准查询与下载

DIN 23405:2004 矿山用急救箱和急救材料

This standard specifies the safety requirements for first-aid boxes for keeping ready to use first-aid material predominantly in underground mining.

First aid boxes and first aid material for use in mining

BIP 3005-2004 急救培训课程

This is a fully interactive CD-ROM that aids compliance with First Aid at Work Regulations. An accurate and easily understood course, using graphics, photography and digital video, the CD monitors individual progress through short tests taken at intervals throughout the course.

First aid training course CD-ROM

ASTM F2266-03(2015) 用于测试救援系统和组件的包块的标准规格

1.1 This specification defines the masses to be used when testing rescue systems and components. 1.2 The masses represent personnel and equipment that may be attached to a rescue system or components. However, the masses do not represent any particular type or kind of rescuer or equipment. 1.2.1 The masses chosen have been used in the past or are in current use in testing of rescue systems and components. Limiting testing to the masses listed in this specification allows meaningful comparisons between past, current, and future test results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 The user of this specification shall determine which mass(es) represent(s) the personnel and equipment attached to the system or component under test. 1.5 For the purposes of this specification, mass and weight are synonymous when the object(s) representing the mass(es) are weighed in air anywhere on Earth. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Masses Used in Testing Rescue Systems and Components

BS 8403:2002 在受控水上运动条件下救援伤亡人员用的水上脊柱固定板规范

This British Standard specifies the construction and performance of aquatic spineboards for use in the rescue, from water, of casualties with suspected spinal injuries. It is applicable only to aquatic spineboards for use in controlled aquatic conditions.

Specification for aquatic spineboards for recovering casualties in controlled aquatic conditions

ASTM F1560-00 紧急医疗调度管理标准实务

1.1 This practice covers the function of the emergency medical dispatcher (EMD). This function is the prompt and accurate processing of calls for emergency medical assistance. The training and practice through the use of a written or automated medical dispatch protocol is not sufficient in itself to ensure continued medically correct functioning of the EMD. Their dispatch-specific medical training and focal role in EMS has developed to such a complexity that only through a correctly structured and appropriately managed quality assurance environment can the benefits of their practice be fully realized. The philosophies of emergency medical dispatch have established new duties to which the emergency medical dispatch agency must respond. It is important that their quality assurance/quality improvement (QA/QI) activities, including initial hiring, orientation, training and certification, continuing dispatch education, recertification, and performance evaluation be given appropriate managerial attention to help ensure the ongoing safety in the performance of the EMD. This practice establishes functional guidelines for these managerial, administrative and supervisory functions.1.2 The scope of this practice includes:1.2.1 The entry level selection criteria for hiring emergency medical dispatchers;1.2.2 The orientation of new emergency medical dispatchers;1.2.3 Development of QA/QI mechanisms, management strategies and organizational structures for use within a comprehensive emergency medical dispatch system;1.2.4 Performance evaluation as a component of a comprehensive and ongoing quality assurance and risk management program for an emergency medical dispatch system;1.2.5 Development and provision of continuing dispatch education activities for the emergency medical dispatcher;1.2.6 Requirements for initial certification and recertification of the emergency medical dispatcher;1.2.7 Provision for comparative analysis between different EMD program approaches available to the EMS community that conform to established EMD practice standards prior to implementation of an emergency medical dispatch program; and1.2.8 Guidelines for implementation of an emergency medical dispatch program.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Emergency Medical Dispatch Management

ONORM K 2122-2000 急救三角绷带．尺寸，要求，测试

Diese ?NORM legt die Anforderungen an Dreiecktücher, die bei der Erste-Hilfe-Leistung Verwendung finden, in Bezug auf das Material, die Abmessungen und die Festigkeit, sowie die Prüfbestimmungen fest.

Triangular bandage for first aid - Dimensions, requirements, testing

ONORM K 2121-2000 急救．剪刀．尺寸，要求，测试

Diese ONORM legt die Anforderungen an Scheren, die bei der Erste-Hilfe-Leistung Verwendung finden, in Bezug auf das Material, die Abmessungen und die Schneidfahigkeit, sowie Bestimmungen fur die Stichprobenprufung test.

First-aid-scissors - Dimensions, requirements, testing

DIN 13155:1999 急救物资.急救物资用箱

The document applies to sanitary bags. The aim of this requirement is to provide assistance to sanitary staff in their daily service in catastrophe areas and in civil defence and/or to provide sanitary attendants in firms with the basic equipment for first aid.

First aid material - Case for first aid material

DIN 13160:1999 急救材料.装急材料的肩带挂包

The document specifies the measures, the dimensions and the content of the case with shoulder strap for first aid.#,,#

First aid material - Bag with shoulder strap for first aid material

DIN 13164:1998 急救器材.急救箱B

First aid material - First aid box B

DIN 13233:1997 婴幼儿急救箱

The document specifies an emergency doctor kit for babies and children. The content includes an equipment for pediatric emergency.

Emergency doctor kit for babies and children

DIN 13232:1997 急救箱

Emergency doctor kit

DIN 13048-3:1997 可折叠担架.第3部分:横卧位置.尺寸、要求、试验

This sedan chair is for the transport of patients - sitting and lying - inside and outside of ambulances according to DIN 75080-1.

Sedan chair - Part 3: Lying position; dimensions, requirements, tests

DIN 13169:1996 急救材料.包扎箱E

First aid material - First aid box E

DIN 13157:1996 急救材料.包扎箱C

First aid material - First aid box C

YY 0218.3-1995 塞纸机

Paper jammer

DIN 13167:1995 装在摩托车上的急救材料

This document specifies first aid material to be carried for motorcycles.

First aid material to be carried on motorcycles

ASTM F1559-94(2002) 颈椎固定环（CSIC）特征标准指南

Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

ASTM E1589-94 急救抗菌药制品评定的标准试验方法

1.1 The tests described in this test method are designed to evaluate antimicrobial agents in formulations intended for use as first aid antiseptic products for their ability to reduce or suppress the growth, or both, of the skin microflora. 1.2 A knowledge of microbiological techniques is required for these procedures. 1.3 In this test method metric units are used for all applications, except for distance, in which case inches are used and metric units follow in parenthesis. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of First Aid Antiseptic Drug Products

ASTM F1558-94(2015) 辅助颈椎固定装置 (ACSID) 的标准特征指南

4.1 The intent of this guide is to identify characteristics that an ACSID shall possess. 4.2 It is not expected that the ACSID will be used alone to provide the entire scope of required immobilization. Clinical situations may require differing combinations of devices for adequate total spinal immobilization. An ACSID may be one of the devices. 4.3 An ACSID is intended to provide stabilization and/or support in addition to other immobilization devices in one or more of the planes of motion mentioned in 3.2.1 (see 4.2). 1.1 This guide establishes minimum standards for devices designated here as adjunct cervical spine immobilization device (ACSID); a lateral stabilizer for the head is an example of this type of device. The ACSID is designed to be used to assist in the immobilization of the cervical spine, by emergency medical services personnel. 1.2 This guide does not identify specific degrees of limitation of motion achieved by placement of an ACSID on a patient. Definitive requirements for immobilization of the spine, and, in particular, the degree of limitation associated with the use of an ACSID, have not been established in the medical literature. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)