11.200 人口控制、避孕器具 标准查询与下载

BS EN ISO 7439:2011 含铜的宫内节育避孕器具.要求和试验

This International Standard specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments. It is not applicable to IUDs consisting only of a plastics body or whose primary purpose is to release progestogens. NOTE Some aspects of this International Standard can be applicable to medicated intrauterine devices and IUDs not containing copper.

Copper-bearing contraceptive intrauterine devices. Requirements and tests

BS ISO 29942:2011 防护大坝.要求和试验方法

Prophylactic dams. Requirements and test methods

DS/EN ISO 7439:2011 含铜宫内节育器 要求和测试

This International Standard specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments.It is not applicable to IUDs consisting only of a plastics body or whose primary purpose is to release progestogens.NOTE Some aspects of this International Standard can be applicable to medicated intrauterine devices and IUDs not containing copper.

Copper-bearing contraceptive intrauterine devices - Requirements and tests

DB35/T 1174-2011 健康体检服务规范

本标准规定了健康体检服务的基本要求、服务环境、服务人员、服务设施设备、服务环节质量规范、服务质量指标及评价方法、服务质量的监督、考核与改进。 本标准适用于医疗机构的健康体检服务。

Health checkup service specification

ISO 25841:2011 女用避孕套.要求与试验方法

Female condoms - Requirements and test methods

ISO 29942:2011 预防性数据管理系统.要求与试验方法

Prophylactic dams - Requirements and test methods

EN ISO 7439:2011 含铜的子宫内避孕器具.要求和试验防水用聚合物改性沥青厚涂层.水密性测定

This International Standard specifies requirements and tests for single-use, copper-bearing contraceptiveintrauterine devices (IUDs) and their insertion instruments.

Copper-bearing contraceptive intrauterine devices - Requirements and tests

ISO 7439:2011 含铜的宫内节育避孕器具.试验和要求

Copper-bearing contraceptive intrauterine devices - Requirements and tests

BS ISO 23409:2011 男用避孕套.合成材料制避孕套用试验方法和要求

Male condoms. Requirements and test methods for condoms made from synthetic materials

ISO 23409:2011 男用避孕套.由合成材料制成的避孕套要求与试验方法

This International Standard specifies the minimum requirements and the test methods applicable to male condoms produced from synthetic materials or blends of synthetic materials and natural rubber latex which are used for contraceptive purposes and to aid in the prevention of sexually transmitted infections.

Male condoms - Requirements and test methods for condoms made from synthetic materials

ISO 16037:2002/Amd 1:2011 临床试验用橡胶避孕套.物理性能的测量.修改件1

Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1

BS ISO 29941:2010 避孕套 天然橡胶乳胶避孕套中亚硝胺迁移量的测定

1   Scope This International Standard specifies a test method to determine the release of N -nitrosamines from condoms made from natural rubber latex. The method can also be used for other products such as probe covers, prophylactic dams, female condoms and condoms made from synthetic materials, although there was no experience of testing such products at the time of publication of this International Standard.

Condoms. Determination of nitrosamines migrating from natural rubber latex condoms

BS ISO 29941:2011 避孕套.从天然橡胶乳胶避孕套中测定亚硝胺迁移

Condoms. Determination of nitrosamines migrating from natural rubber latex condoms

ISO 29941:2010 避孕套.从天然橡胶乳胶避孕套中测定亚硝胺迁移

This International Standard specifies a test method to determine the release of N-nitrosamines from condoms made from natural rubber latex. The method can also be used for other products such as probe covers, prophylactic dams, female condoms and condoms made from synthetic materials, although there was no experience of testing such products at the time of publication of this International Standard.

Condoms - Determination of nitrosamines migrating from natural rubber latex condoms

DIN EN ISO 7439:2010 含铜的宫内节育避孕器具.试验,要求(ISO 7439-2002).德文版本EN ISO 7439-2009

Copper-bearing intra-uterine contraceptive devices - Requirements, tests (ISO 7439:2002); German version EN ISO 7439:2009

BS EN ISO 7439:2010 含铜的宫内节育避孕器具 要求和试验

Copper-bearing intra-uterine contraceptive devices. Requirements, tests

ASTM D7661-10(2017) 测定滑润剂与天然橡胶避孕套亲和性的标准试验方法

4.1 Weakening of natural rubber latex is known to occur after contact with certain lubricants, particularly petroleum-based products.3,4 This procedure was developed as a screening method for lubricant manufacturers to determine whether or not a particular personal lubricant has a significant effect on the tensile and airburst properties of an NRL condom. 4.2 This test method is designed for use on NRL condoms that meet the criteria of Specification D3492 and can: (1) have a ring specimen cut in compliance with Appendix X1 of Specification D3492 and (2) be tested for burst properties in compliance with Annex A2 of Specification D3492. 4.3 This test method is not to be used to determine the safety of either the test lubricant or NRL condom. This test method is to be used only to determine if the tensile or airburst properties of the NRL condom have been significantly affected by the test lubricant. 1.1 This test method covers procedures used to detect a shift in physical properties of non-lubricated natural rubber latex (NRL) condoms after immersion in a personal lubricant. “Personal lubricants” are lubricants such as liquids or gels that are applied by the consumer at the time of condom use. 1.2 This test method does not attempt to address compatibility of lubricants applied to a condom at the time of manufacture (“manufacturer lubricants”). It shall be the responsibility of the condom manufacturer to verify the long-term stability (shelf life) of any manufacturer lubricant that is packaged within the individual condom wrapper. Other regulatory requirements may apply. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

ASTM D7661-10 测定人体滑润剂与天然橡胶避孕套亲和性的标准试验方法

Weakening of natural rubber latex is known to occur after contact with certain lubricants, particularly petroleum-based products. , This procedure was developed as a screening method for lubricant manufacturers to determine whether or not a particular personal lubricant has a significant effect on the tensile and airburst properties of an NRL condom. This test method is designed for use on NRL condoms that meet the criteria of Specification D3492 and can: (1) have a ring specimen cut in compliance with Appendix X1 of Specification D3492 and (2) be tested for burst properties in compliance with Annex A2 of Specification D3492. This test method is not to be used to determine the safety of either the test lubricant or NRL condom. This test method is to be used only to determine if the tensile or airburst properties of the NRL condom have been significantly affected by the test lubricant.1.1 This test method covers procedures used to detect a shift in physical properties of non-lubricated natural rubber latex (NRL) condoms after immersion in a personal lubricant. “Personal lubricants” are lubricants such as liquids or gels that are applied by the consumer at the time of condom use. 1.2 This test method does not attempt to address compatibility of lubricants applied to a condom at the time of manufacture (“manufacturer lubricants”). It shall be the responsibility of the condom manufacturer to verify the long-term stability (shelf life) of any manufacturer lubricant that is packaged within the individual condom wrapper. Other regulatory requirements may apply. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

SANS 7439:2009 含铜的宫内节育避孕器具．试验要求

Applies to single-use copper-bearing intra-uterine contraceptive devices and their insertion instruments.

Copper-bearing intra-uterine contraceptive devices - Requirements, tests

GSO ISO 4074:2009 天然乳胶橡胶避孕套 要求和测试方法

This International Standard specifies the minimum requirements and the test methods to be used for condoms made from natural rubber latex which are supplied to consumers for contraceptive purposes and to assist in the prevention of sexually transmitted infections.

Natural latex rubber condoms – Requirements and test methods