13.020.40 污染、污染控制和保护 标准查询与下载



共找到 1095 条与 污染、污染控制和保护 相关的标准,共 73

1.1 This guide provides information and criteria for the selection of camera remote sensing systems that are vesselmounted for the detection of oil on water. 1.2 This guide applies to the detection of oil-on-water involving cameras of IR, visible, ultra-violet, or night vision types. 1.3 The context of camera use is addressed to the extent it has a bearing on their selection and utility for certain missions or objectives. 1.4 This guide is generally applicable to all types of crude oils and most petroleum products, under a variety of marine or fresh water situations. 1.5 Many camera technologies exhibit limitations with respect to discriminating between the target substances under certain states of weathering, lighting, wind and sea, or various camera settings. 1.6 In general remote sensing systems are used to detect and delineate the overall slick. Vessel-mounted systems are used only to provide a tactical image in the vicinity of the recovery vessel. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selection and Operation of Vessel-mounted Camera Systems

ICS
13.020.40
CCS
发布
2022-03-01
实施

Determination of major heavy metal elements in marine organisms by inductively coupled plasma emission spectrometry

ICS
13.020.40
CCS
Z 17
发布
2022-02-18
实施
2022-03-18

Determination of major heavy metal elements in marine sediments by inductively coupled plasma emission spectrometry

ICS
13.020.40
CCS
Z 17
发布
2022-02-18
实施
2022-03-18

针对陆上石油天然气开采业全流程,梳理固体废物的产生环节、处置措施及存在的问题,按照不同产排污环节、不同污染物提出污染管控技术要求。

Guidelines for Environmental Management of Solid Waste in Onshore Oil and Gas Exploitation Industry

ICS
13.020.40
CCS
N772
发布
2022-02-10
实施
2022-02-10

本文件规定了土壤地下水修复异味控制剂生产制备的生产线工艺流程、生产参数等的制备技术要求。

Technical guideline for production and preparation of odor control agents for soil and groundwater remediation

ICS
13.020.40
CCS
Z05
发布
2022-02-01
实施
2022-06-24

1 范围 2 规范性引用文件 3 术语和定义 4 评估工作程序 5 危害识别 6 暴露评估 7 效应评估 8 风险表征 9 编制报告 附录A(资料性附录) 毒性数据收集、可靠性评估与筛选 附录B(资料性附录) 阻燃剂类化学物质鉴定及样品前处理方法 附录C(资料性附录) BDE-47、TBBPA毒性数据 附录D(规范性附录) 阻燃剂类化学物质PNEC计算方法 附录E(资料性附录) 典型阻燃剂类化学物质水环境PNEC计算案例

Technical guidelines for aquatic environmental risk assessment of flame retardant chemical substances

ICS
13.020.40
CCS
N772
发布
2022-01-26
实施
2022-06-07

本文件规定了干式化学滤料吸附法恶臭治理的总体要求、设计要求、检测与过程控制、运行与维护和环保与安全。

Odor Control Technical Specification Dry Chemical Filter Material Adsorption Method

ICS
13.020.40
CCS
N772
发布
2022-01-26
实施
2022-01-26

Carbon dioxide capture, transportation and geological storage — Injection operations, infrastructure and monitoring

ICS
13.020.40
CCS
发布
2022-01-17
实施

4 分类、结构和尺寸  5 使用要求  6 技术要求      6.1 外观质量      6.2 物理性能      6.3 耐化学性能      6.4 燃烧性能      6.5 耐寒性能  7 检验规则      7.1 检验分类      7.2 型式检验      7.3 产品组批与抽样判定      7.4 合格判定标准  8 使用信息、标识、包装与贮存      8.1 使用信息      8.2 标识      8.3 包装与贮存 

Drain cover pad for dangerous goods spillage

ICS
13.020.40
CCS
G543
发布
2022-01-15
实施
2022-09-06

1 范围 2 规范性引用文件  3 术语和定义  4 总则 5 基本要求  6 选址 7 规模设计 8 护岸保护 9 植物配置  10 辅助设施配套  附 录 A (资料性) 护岸参考  附 录 B (资料性) 推荐植物种类及种植要求 .

Technical guideline for landscape utilization of effluent from rural sewage treatment facilities

ICS
13.020.40
CCS
N772
发布
2022-01-13
实施
2022-01-13

1.1 An ecological-risk assessment (ERA) is a process for organizing and analyzing data, information, assumptions, and uncertainties to evaluate the likelihood that adverse ecological effects might occur or are occurring as a result of a stressor. This guide is intended to assist remedial project teams, specifically ecological risk assessors, in identifying data and information options that may be used to perform a screening or complex ecological risk assessment (ERA) at a contaminated site. NOTE 1—While the intent of ERA is to evaluate risk (that is, the probability of adverse effects occurring in ecological receptors), there are no measures, statistics, or metrics that calculate or express risk explicitly. However, various metrics or indices, a common example being the hazard quotient, are used to inform risk assessments. 1.2 The identification of data and information options for human health risk assessment is outside the scope of this guide. 1.3 This guide is intended to provide a list for identifying data and information options and does not recommend a specific course of action for ERA activities. 1.4 This guide addresses data and information options for the ecological risk assessment, not verification or long-term monitoring studies. 1.5 This guide lists many of the common data and information options for ERA, but there may be others relevant for any particular site. 1.6 This guide considers one component of an ERA, that is, identification of data and information options. Other ASTM guides have been developed, for example, Guides E1689 and E1848, and are being developed to cover other components of the risk assessment process. 1.7 This guide does not provide information on how to perform any of the analytical procedures used to perform a risk assessment once data collection options are defined. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites

ICS
13.020.40
CCS
发布
2022-01-01
实施

本标准规定了在线水质荧光指纹污染预警溯源仪(以下简称“预警溯源仪”)的术语和定义、总体 要求、技术要求、检验方法、检验规则及标志、包装、运输与贮存等。 本标准适用于监测地表水、地下水、近岸海水和管网排水的预警溯源仪。

Technical requirements for online water quality fluorescent fingerprint pollution early warning and traceability instrument

ICS
13.020.40
CCS
Z10
发布
2022-01-01
实施
2000-02-01

This document specifies requirements and guidelines for the quantification and reporting of the process carbon footprint of biobased plastics (see ISO 22526-1), being a partial carbon footprint of a bioplastic product, based on ISO 14067 and consistent with International Standard

Plastics - Carbon and environmental footprint of biobased plastics - Part 3: Process carbon footprint, requirements and guidelines for quantification (ISO 22526-3:2020); German version EN ISO 22526-3:2021

ICS
13.020.40
CCS
发布
2022-01-00
实施

This document specifies the general principles and the system boundaries for the carbon and environmental footprint of biobased plastic products. It is an introduction and a guidance document to the other parts of the ISO 22526 series. This document is applicable to plastic produ

Plastics - Carbon and environmental footprint of biobased plastics - Part 1: General principles (ISO 22526-1:2020); German version EN ISO 22526-1:2021

ICS
13.020.40
CCS
发布
2022-01-00
实施

This document defines the material carbon footprint as the amount (mass) of CO2 removed from the air and incorporated into plastic, and specifies a determination method to quantify it. This document is applicable to plastic products, plastic materials and polymer resins that are

Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020); German version EN ISO 22526-2:2021

ICS
13.020.40
CCS
发布
2022-01-00
实施

This document specifies test methods and criteria for showing intrinsic biodegradability in marine environments of virgin plastic materials and polymers without any preliminary environmental exposure or pre-treatment. Test methods applied in this document are carried out at tempe

Plastics - Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions - Test methods and requirements (ISO 22403:2020); German version EN ISO 22403:2021

ICS
13.020.40
CCS
发布
2022-01-00
实施

3 术语和定义 3.1 邻苯二甲酸酯类 phthalate esters,PAEs 3.2  农田防护林 shelter-belt on farmland 4 基地条件 4.1 环境要求 4.2 设施要求 5 茶园管理 6 茶叶采摘与加工 7 茶叶运输与储藏 8 试验方法

Technical regulation of phthalate esters (PAEs) pollution control in teas

ICS
13.020.40
CCS
N772
发布
2021-12-31
实施
2022-01-28

1 范围 2 规范性引用文件 3 术语和定义 4 废水水量及水质特征 5 废水处理及回用可行技术 

Technical guideline on the reuse of wastewaters from dyeing and finishing of textile enterprises

ICS
13.020.40
CCS
N772
发布
2021-12-30
实施
2022-01-17

Technical specifications for vehicle-mounted mobile monitoring and evaluation of road dust load

ICS
13.020.40
CCS
Z10
发布
2021-12-28
实施
2022-04-01

Capacity building of professional emergency rescue team to standardize environmental emergencies

ICS
13.020.40
CCS
Z06
发布
2021-12-28
实施
2022-04-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号