13.020.40 污染、污染控制和保护 标准查询与下载



共找到 1098 条与 污染、污染控制和保护 相关的标准,共 74

本文件规定了天然气开采含油污泥综合利用后剩余固相利用处置的方式、技术要求、污染控制、环境监测及环境管理要求。 本文件适用于天然气开采含油污泥综合利用后剩余固相利用处置的污染防治和环境监督管理。 本文件不适用于天然气开采及含油污泥综合利用过程中使用了《关于持久性有机污染物的斯德哥尔摩公约》所列化学品产生的剩余固相。

Utilization and disposal standards for residual solids after comprehensive utilization of oily sludge from natural gas exploitation

ICS
13.020.40
CCS
Z 05
发布
2021-11-08
实施
2022-01-01

General principles and requirements for bodies validating and verifying environmental information

ICS
13.020.40
CCS
发布
2021-11-01
实施
2021-11-01

1.1 This guide relates to the use of in-situ burning of oil spills. The focus of the guide is in-situ burning of spills on water, but the techniques described in the guide are generally applicable to in-situ burning of land spills as well. 1.2 The purpose of this guide is to provide information that will enable spill responders to estimate the volume of oil consumed in an in-situ burn. 1.3 This guide is one of several related to in-situ burning. Other standards cover specifications for fire-containment booms and the environmental and operational considerations for burning. 1.4 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1 Exception—Table 1, Table 2 and Fig. 2 provide inch-pound units for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Estimating the Volume of Oil Consumed in an In-Situ Burn

ICS
13.020.40
CCS
发布
2021-11-01
实施

1.1 This guide provides information and criteria for selection of remote sensing systems for the detection and monitoring of oil on water. 1.2 This guide applies to the remote sensing of oil-on-water involving a variety of sensing devices used alone or in combination. The sensors may be mounted on vessels, in helicopters, fixed-wing aircraft, unmanned aerial vehicles (UAVs), drones, or aerostats. Excluded are situations where the aircraft are used solely as a telemetry or visual observation platform and exo-atmosphere or satellite systems. 1.3 The context of sensor use is addressed to the extent it has a bearing on their selection and utility for certain missions or objectives. 1.4 This guide is generally applicable for all types of crude oils and most petroleum products, under a variety of marine or fresh water situations. 1.5 Many sensors exhibit limitations with respect to discriminating the target substances under certain states of weathering, lighting, wind and sea, or in certain settings. 1.6 This guide gives information for evaluating the capability of a remote surveillance technology to locate, determine the areal extent, as well as measure or approximate characteristics of oil spilled upon water. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 Remote sensing of oil-on-water involves a number of safety issues associated with the modification of aircraft and their operation, particularly at low altitudes. Also, in some instances, hazardous materials or conditions (for example, certain gases, high voltages, etc.) can be involved. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water

ICS
13.020.40
CCS
发布
2021-11-01
实施

Adaptation to climate change — Principles, requirements and guidelines

ICS
13.020.40
CCS
发布
2021-10-27
实施

Adaptation to climate change — Principles, requirements and guidelines

ICS
13.020.40
CCS
发布
2021-10-27
实施

Carbon dioxide capture. Evaluation procedure to assure and maintain stable performance of post-combustion CO2 capture plant integrated with a power plant

ICS
13.020.40
CCS
发布
2021-10-20
实施
2021-10-20

Toxicological evaluation of the mullet gobies part 3: growth inhibition

ICS
13.020.40
CCS
Z 10
发布
2021-10-18
实施
2022-01-18

Toxicological evaluation of the mullet gobies, part 1: acute toxicity

ICS
13.020.40
CCS
Z 10
发布
2021-10-18
实施
2022-01-18

Toxicological evaluation of Mullet gobies - Part 4: Reproductive toxicity

ICS
13.020.40
CCS
Z 10
发布
2021-10-18
实施
2022-01-18

Toxicological evaluation of the mullet goby part 2: Inhibition of feeding

ICS
13.020.40
CCS
Z 10
发布
2021-10-18
实施
2022-01-18

本文件规定了农产品产地铅污染源识别的相关术语和定义、原理、流程、污染源调查、监测区划定、 布点、样品采集、检测和源识别方法等技术内容。  本文件适用于农产品产地铅污染源的识别。

Technical specification for source identification of lead pollution in agricultural production soils

ICS
13.020.40
CCS
A051
发布
2021-10-13
实施
2021-10-21

为了指导和规范固体废物资源化的健康风险评估工作,本标准规定了固体废物资源化过程和资源化产品健康风险评估的工作程序、内容和方法,对化学毒性物质的筛选、资源化过程中化学毒性物质的排放与环境行为预测、资源化产品的使用场景确定以及资源化产品中化学毒性物质的释放、健康风险结果的判定等提出了技术要求。本标准的实施将为固体废物的风险管理提供重要的技术支撑。

Technical Guide for Health Risk Assessment of Solid Waste Recycling

ICS
13.020.40
CCS
N772
发布
2021-10-11
实施
2022-01-21

范围;规范性引用文件;术语和定义;基本要求;技术要求;信息管理;环境保护;安全生产;记录要求等

Specification of take-back on waste electrical and electronic product

ICS
13.020.40
CCS
Z05
发布
2021-10-08
实施
2022-07-07

This document provides definitions, guidelines and supporting information for evaluating and reporting (with respect to the basic design items ongoing, and the operational results of a reference plant or unit as feedback) to ensure the (designed) performance of a PCC plant integrated with a host power plant. The PCC plant separates CO2 from the power plant flue gas in preparation for subsequent transportation and geological storage. The physical system being addressed is a single power plant, with an optional auxiliary unit to provide thermal energy required for the PCC plant, and a single PCC plant as described in ISO 27919-1. The formulas and methods to assure and maintain reliable performance, presented in this document, describe issues addressed during the design and construction phases and practices that document reliability and availability during routine operation. These practices would also guide ongoing maintenance programmes. This document does not provide guidelines for benchmark, comparison or assessment studies for PCC plant operations using different capture technologies (i.e. absorbents), nor does it specify appropriate operating conditions such as temperature etc.

Carbon dioxide capture — Part 2: Evaluation procedure to assure and maintain stable performance of post-combustion CO2 capture plant integrated with a power plant

ICS
13.020.40
CCS
发布
2021-10-01
实施

General principles and requirements for bodies validating and verifying environmental information (ISO 14065:2020)

ICS
13.020.40
CCS
发布
2021-10-00
实施

Textiles and textile products - Microplastics from textile sources - Part 1: Determination of material loss from fabrics during washing (ISO/DIS 4484-1:2021)

ICS
13.020.40
CCS
发布
2021-10-00
实施

针对我国目前实施的排污许可与流域水质关联性不强、许可排放限值与水质未产生联动等重要问题,立足于我国流域管理特点,围绕基于流域排放标准的排污许可限值制定、与现行的排污单位排污许可证衔接、与入河排污口实施要求衔接等,为有水质改善需求的流域或水功能区执行基于水质的排污许可制提供科学性、规范性的指导,并推动污染削减及水体水质改善。 具体技术内容包括:(1)范围;(2)规范性引用文件;(3)术语和定义;(4)总体要求;(5)排污单位与入河排污口对应关系确定;(6)许可排放限值确定;(7)入河排污口排污许可实施要求;(8)资料性附录。

Technical guidelines for development of permitted emission limits Based on pollutant discharge standards for watersheds

ICS
13.020.40
CCS
N772
发布
2021-09-30
实施
2021-10-13

针对我国流域排放标准编制缺乏规范流程、标准限值制定技术壁垒强、成本高等重要问题,立足于我国流域管理特点,围绕流域排放标准编制需求识别、流域排放标准限值制定方法确定、入河排污口与对应点源排放限值确定等关键技术环节提供规范性内容,为有水质改善需求的流域或水功能区编制流域排放标准提供规范性、科学性且符合成本效益的指导,通过标准推动污染削减以及水体水质的改善。 具体技术内容包括:(1)范围;(2)规范性引用文件;(3)术语和定义;(4)总体原则与要求;(5)汇水单元的状况调查;(6)排放限值的确定;(7)资料性附录。

Technical guidelines for discharge standards and limits for watersheds based on water quality objectives (on trial)

ICS
13.020.40
CCS
N772
发布
2021-09-30
实施
2021-10-13

本文件规定了钢铁企业大气污染治理工程总体要求、技术路线、有组织排放治理技术和无组织排放控制措施、检测与监控要求等。 具体技术内容包括:(1)范围;(2)规范性引用文件;(3)术语和定义;(4)有组织排放治理与监控;(5)无组织排放治理与监控;(6)资料性附录等。

Technical guidelines on air pollution control projects for iron and steel industry

ICS
13.020.40
CCS
N772
发布
2021-09-30
实施
2021-10-13



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号