13.020.40 污染、污染控制和保护 标准查询与下载

ASTM F1693-21 将生物修复考虑为陆上溢油应急方法的标准指南

1.1?The goal of this guide is to provide recommendations for the use of biodegradation enhancing agents for remediating oil spills in terrestrial environments. 1.2?This is a general guide only, assuming the bioremediation agent to be safe, effective, available, and applied in a

Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

OENORM EN 15522-1-2021 溢油鉴定石油和石油相关产品 第1部分：取样

Oil spill identification Petroleum and petroleum related products - Part 1: Sampling

OENORM EN 15522-2-2021 溢油识别 水性石油和石油产品 第2部分：基于 GC-FID 和 GC-MS 低分辨率分析的分析方法和结果解释

Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses

ISO/TR 27922:2021 二氧化碳捕获-水泥行业二氧化碳捕获技术概述

Carbon dioxide capture - Overview of carbon dioxide capture technologies in the cement industry

T/ACEF 022-2021 秸秆焚烧污染控制要求

       本文件规定了秸秆焚烧的焚烧地点要求、焚烧量要求、气象条件要求、焚烧条件要求、大气污染物 控制项目及排放要求、监测要求等内容。        本文件适用于政策允许焚烧区域的小麦、玉米、水稻三种农作物秸秆焚烧的污染控制，其它秸秆焚 烧的污染控制也可参考实施。

Requirements for pollution control of crop straw burning

T/ACEF 021-2021 民用燃煤大气污染物控制要求

本文件规定了民用燃煤大气污染物控制、排放限值及监测要求。 本文件的制定主要是为了促进民用燃煤设施（炉具）及污染防治设施的技术进步和推进民用燃煤设施操作规程的合理化，供有关部门参考使用。

Requirements for atmospheric pollutant control of residential coal combustion

T/ACEF 023-2021 秸秆焚烧污染控制技术指南

       本文件提供了秸秆露天焚烧和秸秆燃料化利用的大气污染控制技术指南和管理建议。        本文件适用于玉米、小麦和水稻三种农作物秸秆的焚烧污染控制，以及秸秆燃料化利用工程的环境 影响评价、环境保护设施设计、竣工环境保护验收、排污许可管理等，其它农作物秸秆的焚烧污染控制 也可参考本文件。

Technical guidelines for pollution control of crop straw burning

DB34/T 3804-2021 抑尘剂应用技术规程

Technical Regulations for Dust Suppressant Application

PN-EN ISO 14064-3-2019-07 P 温室气体 第3部分：温室气体声明验证和验证指南规范（ISO 14064-3:2019）

Greenhouse gases -- Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)

DB13/T 5363-2021 生物和化学制药行业挥发性有机物与恶臭气体污染控制技术指南

Technical Guidelines for the Control of Volatile Organic Compounds and Odor Gas Pollution in Biological and Chemical Pharmaceutical Industries

DB13/T 5361-2021 废塑料回收与再利用污染控制技术规范

Technical Specifications for Pollution Control of Waste Plastic Recycling and Reuse

DB41/ 2089-2021 锅炉大气污染物排放标准

Boiler Air Pollutant Emission Standards

DS/ISO 14404-4:2021 《钢铁生产二氧化碳排放强度计算方法》第4部分：ISO 14404系列标准使用指南

Calculation method of carbon dioxide emission intensity from iron and steel production – Part 4: Guidance for using the ISO 14404 series

UNI ISO/TS 14092:2021 适应气候变化 对地方政府和社区适应规划的要求和指导

Adaptation to climate change -- Requirements and guidance on adaptation planning for local governments and communities

T/CSTE 0001-2021 污（废）水处理用碳源

4.1 用于生产单一碳源和复合碳源的有效碳源成分应符合已发布的国家标准、行业标准的质量要求和 有关规定，其安全要求按照GB 12268-2012执行，详见附录A。 4.2 碳源生产工艺宜采用国家鼓励的先进技术工艺，不应使用国家或有关部门发布的淘汰或禁止的技 术、工艺或材料，不得超越范围选用限制使用的材料生产。 4.3 以不危及自身或他人健康和安全的方式进行产品的生产和复配，碳源产品应稳定，无后续化学反 应。 4.4 液体单一碳源产品为无色或微黄色透明液体，不得有与产品原料气味不相符的气味。固体产品为 无色透明或白色结晶粉末或结晶颗粒，无臭无异味，无肉眼可见杂质，溶于水。复合碳源产品为无色至 棕黄色透明液体，不得有与产品配方中碳源有效成分不相符的气味。

Carbon source for wastewater and sewage treatment

T/GDACERCU 0018-2021 含油污泥处理处置及污染控制技术规范

本标准规定了含油污泥处理处置的总体要求、工艺技术、污染控制、环境监测和管理方面的要求。

Technical specification for oily sludge treatment and pollution control

BS ISO 14404-4:2020 钢铁生产二氧化碳排放强度的计算方法 ISO 14404系列使用指南

Calculation method of carbon dioxide emission intensity from iron and steel production. Guidance for using the ISO 14404 series

DB13/ 5325-2021 生活垃圾焚烧大气污染控制标准

Air Pollution Control Standards for Household Garbage Incineration

ASTM E1676-12(2021) 用蚯蚓进行实验室土壤毒性或生物累积试验的标准指南

1.1 This guide covers procedures for obtaining laboratory data to evaluate the adverse effects of contaminants (for example, chemicals or biomolecules) associated with soil to earthworms (Family Lumbricidae) and potworms (Family Enchytraeidae) from soil toxicity or bioaccumulation tests. The methods are designed to assess lethal or sublethal toxic effects on earthworms or bioaccumulation of contaminants in shortterm tests (7 to 28 days) or on potworms in short to long-term tests (14 to 42 days) in terrestrial systems. Soils to be tested may be (1) reference soils or potentially toxic site soils; (2) artificial, reference, or site soils spiked with compounds; (3) site soils diluted with reference soils; or (4) site or reference soils diluted with artificial soil. Test procedures are described for the species Eisenia fetida (see Annex A1) and for the species Enchytraeus albidus (see Annex A4). Methods described in this guide may also be useful for conducting soil toxicity tests with other lumbricid and enchytraeid terrestrial species, although modifications may be necessary. 1.2 Modification of these procedures might be justified by special needs. The results of tests conducted using atypical procedures may not be comparable to results using this guide. Comparison of results obtained using modified and unmodified versions of these procedures might provide useful information concerning new concepts and procedures for conducting soil toxicity and bioaccumulation tests with terrestrial worms. 1.3 The results from field-collected soils used in toxicity tests to determine a spatial or temporal distribution of soil toxicity may be reported in terms of the biological effects on survival or sublethal endpoints (see Section 14). These procedures can be used with appropriate modifications to conduct soil toxicity tests when factors such as temperature, pH, and soil characteristics (for example, particle size, organic matter content, and clay content) are of interest or when there is a need to test such materials as sewage sludge and oils. These methods might also be useful for conducting bioaccumulation tests. 1.4 The results of toxicity tests with (1) materials (for example, chemicals or waste mixtures) added experimentally to artificial soil, reference soils, or site soils, (2) site soils diluted with reference soils, and (3) site or reference soils diluted with artificial soil, so as to create a series of concentrations, may be reported in terms of an LC50 (median lethal concentration) and sometimes an EC50 (median effect concentration). Test results may be reported in terms of NOEC (no observed effect concentration), LOEC (lowest observed effect concentration) or as an ECx (concentration where x % reduction of a biological effect occurs. Bioaccumulation test results are reported as the magnitude of contaminant concentration above either the Day 0 tissue baseline analysis or the Day 28 tissues from the negative control or reference soil (that is, 2x, 5x, 10x) (see A3.9). 1.5 This guide is arranged as follows: Scope 1 Referenced Documents 2 Terminology 3 Summary of Guide 4 Significance and Use 5 Interferences 6 Apparatus 7 Safety Precautions 8 Soil 9 Test Organism 10 Procedure 11 Analytical Methodology 12 Acceptability of Test 13 Calculation of Results 14 Report 15 Annexes Annex A1. Eisenia fetida Annex A2. Artificial Soil Composition Annex A3. Bioaccumulation Testing Utilizing Eisenia fetida Annex A4. Enchytraeid Reporduction Test (ERT) References 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1 This guide is under the jurisdiction of ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action and is the direct responsibility of Subcommittee E50.47 on Biological Effects and Environmental Fate. An ASTM guide is defined as a series of options or instructions that do not recommend a specific course of action. Current edition approved Jan. 1, 2021. Published February 2021. Originally approved in 1995. Last previous edition approved in 2012 as E1676–12. DOI: 10.1520/E1676-12R21. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. While some safety considerations are included in this guide, it is beyond the scope of this standard to encompass all safety requirements necessary to conduct soil toxicity tests. Specific precautionary statements are given in Section 8. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida and the Enchytraeid Potworm Ench

T/GIA 006-2021 地下水污染阻隔技术指南

本文件给出了 地下水污染阻隔技术的适用范围、技术选择、技术要求 ，地下水污染阻隔材料的基本要求的建议；以及地下水污染阻隔效果的监测与评估方法。

Technical guide for groundwater pollution barriers