13.020.40 污染、污染控制和保护 标准查询与下载

ASTM E2277-14(2019) 煤灰结构填料设计与施工标准指南

1.1 This guide covers procedures for the design and construction of engineered structural fills using coal combustion products (CCPs) including but not limited to fly ash, bottom ash, boiler slag or other CCPs that can meet the requirements of an engineered fill as described herein. CCPs may be used alone or blended with soils or other suitable materials to achieve desired geotechnical properties. 1.2 This guide describes the unique design and construction considerations that may apply to engineered structural fills constructed of with CCPs that have been adequately characterized as being suitable for this beneficial use. 1.3 Beneficial utilization of CCPs consistent with this standard conserves land, natural resources, and 1.4 This guide applies only to CCPs produced primarily by the combustion of coal. 1.5 The testing, engineering, and construction practices for coal ash fills are similar to generally accepted practices for natural soil fills. Coal ash structural fills should be designed using generally accepted engineering practices. However, when CCPs are used in saturated conditions such as ponds or impoundments, the potential for liquefaction may need to be considered. 1.6 Laws and regulations governing the use of coal ash vary by state. The user of this guide has the responsibility to determine and comply with applicable requirements. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Design and Construction of Coal Ash Structural Fills

DB62/ 4014-2019 农村生活污水处理设施水污染物排放标准

Discharge Standards for Water Pollutants of Rural Domestic Sewage Treatment Facilities

JBT13739-2019 堆肥用功能性覆盖膜

Functional covering film for composting

JBT13734-2019 工业有机废气蓄热热力燃烧装置

Industrial organic waste gas regenerative thermal combustion device

JBT13733-2019 工业有机废气蓄热催化燃烧装置

Industrial organic waste gas regenerative catalytic combustion device

JBT13732-2019 高温电除尘器

High temperature electrostatic precipitator

ASTM F2709-19 测定固定式撇油器系统铭牌回收率的标准试验方法

1.1 This test method defines a method and measurement criteria to quantify the performance of a stationary skimmer in ideal conditions in support of a device’s nameplate recovery rate (capacity). If a determination of a skimmer’s capabilities in realistic conditions (that is, advancing or waves) is required, testing should be performed according to Guide F631 or equivalent. 1.2 This test method includes the option of testing to determine recovery efficiency. 1.3 This test method and parameters are intended to provide ideal recovery conditions allowing the skimmer system to operate and collect oil at its maximum possible recovery rate. Given ideal conditions, inherent mechanical and physical attributes of the system become the limiting factors. 1.4 This test method is intended to identify limitations of the skimmer system, such as performance of the skimming mechanism, the flow of oil within the skimmer and sump, the pump characteristics, and typical discharge head conditions. 1.5 It is accepted that the measured nameplate recovery rate as determined by this test method will not likely be achievable under actual conditions of a spill. The measured nameplate recovery rate should be used in conjunction with a de-rating factor to account for such issues as changing encounter rate, changes in other recovery conditions, changes in oil properties and slick thickness, number of daylight hours, operator downtime, less than ideal control of skimmer settings, and inclement weather. 1.6 This test method involves the use of specific test oils that may be considered hazardous materials. It is the responsibility of the user of this test method to procure and abide by necessary permits and regulations for the use and disposal of test oil. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems

BS EN ISO 14090:2019 适应气候变化 原则、要求和指南

What is ISO 14090 - Adaptation to climate change guidelines about? ISO 14090 discusses adaptation to climate change. ISO 14090 specifies principles, requirements, and guidelines for adaptation to climate change. Preparing for risks posed by climate change and planning for adaptation at local government and community levels is essential for the safety and security of society, as well as for its economic, environmental, and social well-being. ISO 14090 includes the integration of adaptation within or across organizations, understanding impacts and uncertainties, and how these can be used to inform decisions. ISO 14090 applies to any organization, regardless of size, type, and nature, e.g., local, regional, international, business units, conglomerates, industrial sectors, natural resource management units. ISO 14090 supports the development of sector-, aspect-, or element-specific climate change adaptation standards. Who is ISO 14090 - Adaptation to climate change guidelines for ? ISO 14090 on adaptation to climate change guidelines is useful for: All organizations, regardless of type, size, location, and complexity Environmental consultants and specialists Environmental Management Syst...

Adaptation to climate change. Principles, requirements and guidelines

DB37/T 3599-2019 突发环境事件应急监测技术指南

Technical Guidelines for Emergency Monitoring of Environmental Emergencies

DB36/ 1149-2019 工业废水铊污染物排放标准

Discharge standard of industrial wastewater thallium pollutant

EN ISO 14090:2019 适应气候变化-原则、要求和指南

This document specifies principles, requirements and guidelines for adaptation to climate change. This includes the integration of adaptation within or across organizations, understanding impacts and uncertainties and how these can be used to inform decisions. This document is applicable to any organization, regardless of size, type and nature, e.g. local, regional, international, business units, conglomerates, industrial sectors, natural resource management units. This document can support the development of sector-, aspect- or element-specific climate change adaptation standards.

Adaptation to climate change - Principles, requirements and guidelines (ISO 14090:2019)

ISO 14090:2019 适应气候变化-原则、要求和指南

This document specifies principles, requirements and guidelines for adaptation to climate change. This includes the integration of adaptation within or across organizations, understanding impacts and uncertainties and how these can be used to inform decisions. This document is applicable to any organization, regardless of size, type and nature, e.g. local, regional, international, business units, conglomerates, industrial sectors, natural resource management units. This document can support the development of sector-, aspect- or element-specific climate change adaptation standards.

Adaptation to climate change — Principles, requirements and guidelines

ISO 20951:2019 关于农业和森林土壤温室气体（CO2 N2O CH4）排放量测定方法的选择和应用指南

This document gives an overview and provides guidance on the main methods available to quantify the exchanges of greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) between soils and the atmosphere. It is intended to help users to select the measurement method or methods most suited to their purposes by setting out information on the application domain and the main advantages and limitations of each methods.

Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere

DB11/ 208-2019 加油站油气排放控制和限值

Oil and gas emission control and limit value of gas station

DB11/ 1631-2019 电子工业大气污染物排放标准

Air Pollutant Emission Standards for the Electronics Industry

BS EN ISO 14064-3:2019 温室气体 温室气体声明验证和确认指南规范

What is ISO 14064-3 – GHG verification statement about? ISO 14064 discusses greenhouse gases (GHGs). ISO 14064 ‑ 3 is the third part of the multi-series on GHGs and specifies principles and requirements and also provides guidance for verifying and validating GHG statements. ISO 14064 ‑ 3 applies to organization, project, and product GHG statements. The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards. Who is ISO 14064-3 - GHG verification statement for ? ISO 14064-3 on GHG verification statement is useful for: Industries emitting GHGs Climate regulatory authorities / emission monitoring bodies Environment protection authorities Government authorities Why should you use ISO 14064-3 - GHG verification statement ?

Greenhouse gases. Specification with guidance for the verification and validation of greenhouse gas statements

BS EN ISO 14064-2:2019 温室气体 项目层面的规范和指导 用于量化、监测和报告温室气体减排量或清除量的增加

What is ISO 14064 ‑ 2 – GHG reduction measures about? ISO 14064 discusses greenhouse gases (GHGs). ISO 14064 ‑ 2 is the second part of the multi-series on GHGs and specifies principles and requirements and also provides guidance at the project level for the quantification, monitoring and reporting of activities intended to cause GHG emission reductions or removal enhancements. ISO 14064 ‑ 2 includes requirements for planning a GHG project, identifying and selecting GHG sources, sinks and reservoirs (SSRs) relevant to the project and baseline scenario, monitoring, quantifying, documenting, and reporting GHG project performance and managing data quality.  The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, the requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards. Who is ISO 14064 ‑ 2 - GHG reduction measures for ? ISO 14064 ‑ 2 on GHG reduction measures is useful for: Industries emitting GHGs Climate regulatory authorities / emission monitoring bodies Environment protection authorities Government authorities Why should you use ISO 14064 ‑ 2 - GHG reduction measures ? Climate change arising from anthropogenic activity has been identified as one of the greatest challenges facing the world and will continue to affect businesses and citizens over future decades. Climate change has implications for both human and natural systems ...

Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements

DB37/T 3547-2019 核电厂施工期环境监测技术规范

Technical specifications for environmental monitoring during construction of nuclear power plants

EN ISO 14064-3:2019 温室气体.温室气体认定用验证和确认的规范与指南

This document specifies principles and requirements and provides guidance for verifying and validating greenhouse gas (GHG) statements. It is applicable to organization, project and product GHG statements. The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards.

Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)

ASTM D6081-19 润滑剂的水生毒性试验的标准实施规程:样品制备和结果解释

Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation