13.020.40 污染、污染控制和保护 标准查询与下载

JB/T 13563-2018 污水处理曝气机用减速机

Reducer for sewage treatment aerator

JB/T 13560-2018 袋式除尘器用滤料耐折性能测试方法

Test method for folding resistance of filter materials used in bag dust collectors

JB/T 13562-2018 风送式喷雾降尘装置 技术条件

Technical conditions of air-driven spray dust suppression device

JB/T 13556-2018 管式湿式电除尘器

Tubular wet electrostatic precipitator

JB/T 13561-2018 选择性催化还原法烟气脱硝装置用尿素水解制氨设备

Urea hydrolysis ammonia production equipment for selective catalytic reduction flue gas denitrification device

DB37/ 2373-2018 建材工业大气污染物排放标准

Air Pollutant Emission Standards for Building Materials Industry

DB37/ 2374-2018 锅炉大气污染物排放标准

Boiler Air Pollutant Emission Standards

ISO 14080:2018 温室气体管理和相关活动. 气候行动方法论的框架和原则

Greenhouse gas management and related activities - Framework and principles for methodologies on climate actions

DB14/T 1073-2018 燃煤电厂大气污染物排放标准

本标准适用于山西省辖区内现有燃煤电厂大气污染物的排放管理，以及新建、改建、扩建项目的燃 煤电厂环境影响评价、环境保护设施设计、竣工环境保护验收及其投产后的大气污染物排放管理。 本标准适用于单台出力65 t/h以上除层燃炉、抛煤机炉外的燃煤发电锅炉；各种容量的煤粉发电锅 炉；单台出力65 t/h以上采用煤矸石、煤泥、洗中煤等燃料或以煤为主掺烧其他燃料的发电锅炉。 本标准适用于法律允许的污染物排放行为。新设立污染源的选址和特殊保护区域内现有污染源的管 理，按照《中华人民共和国大气污染防治法》《中华人民共和国环境影响评价法》等法律、法规、规章 的相关规定执行。

Air pollutant emission standards for coal-fired power plants

JB/T 6260-2018 容积式油耗测量装置 技术条件

Technical conditions of volumetric fuel consumption measuring device

JB/T 13408-2018 除尘脱汞一体化电袋复合除尘器

Integrated electric bag composite dust collector for dust removal and mercury removal

HG/T 5310-2018 高分子吸收剂

本标准规定了高分子吸收剂的要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于吸收液体有机化学品的固体颗粒状高分子吸收剂。

Polymer absorbent

JB/T 13409-2018 袋式除尘器 穿壁连接器

Bag filter through wall connector

JB/T 9515-2018 质量式油耗测量装置 技术条件

Technical conditions of mass fuel consumption measuring device

JB/T 13413-2018 燃煤烟气二氧化碳储存装备

Coal flue gas carbon dioxide storage equipment

JB/T 13415-2018 湿式电除尘器 安装技术规范

Technical specifications for the installation of wet electrostatic precipitators

JB/T 13414-2018 燃煤烟气脱硝催化装置

Coal-fired flue gas denitrification catalytic device

JB/T 13416-2018 水泥工业烟尘治理 袋式除尘器用滤料

Filter media for dust control bag dust collectors in the cement industry

ASTM F2008-00(2018) 撇油器性能定性观察标准指南

1.1 This guide covers evaluating a number of qualitative performance parameters for full-scale oil spill removal systems or individual components of those systems. It is intended to complement the quantitative testing covered in Guide F631. 1.2 This guide is intended for potential purchasers of oil spill removal equipment to ensure that suppliers meet their needs and expectations. 1.3 This guide requires a subjective evaluation that could vary widely when completed by different organizations. As such, its main use would be as a means of comparing different skimmers for a particular organization or application. 1.4 Not all of the items in this guide would apply to a particular skimmer or to a particular cleanup application. Prior to using this guide, users should carefully review the entire contents and note those areas that are most important to their needs. In particular, qualitative evaluation of items such as workmanship of construction may not be applicable to prototype skimmers. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific safety precautions are given in Section 9. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Qualitative Observations of Skimmer Performance

ISO/TR 27918:2018 综合CCS项目的生命周期风险管理

Lifecycle risk management for integrated CCS projects