13.020.40 污染、污染控制和保护 标准查询与下载

ASTM F2926-18 船载摄像系统的选择和操作标准指南

Standard Guide for Selection and Operation of Vessel-mounted Camera Systems

DB37/T 3090-2017 农村生活污水处理技术规范

Technical Specifications for Rural Domestic Sewage Treatment

KS I 0021-2017 指导有关车辆的4种重金属 可回收性和可恢复性工资管理符合性自我声明

Guidance for self declaration of conformity about management of 4 heavy metals, recyclability and recoverability rates of vehicles

T/LGBA 001-2017 辽宁省绿色建筑协会室内环境净化治理服务标准

辽宁省绿色建筑协会为规范室内环境净化治理行业会员单位的服务标准，更好的保护业主健康，特制定本标准。 本标准在制定过程中，编制组在调研国内外大量标准规范和研究成果的基础上，结合我省情况，进行了有针对性的专题研究，经广泛征求意见和多次讨论修改，最后经审核定稿。 本标准为自愿性标准，建议会员单位严格按照本标准执行，确保规范操作，从而达到最佳治理效果。 本标准按照GB/T 1.1-2009给出的规则起草。 本标准是室内环境净化治理行业的服务性标准。 本标准附录A、附录B、附录C、附录D、附录E、附录F、附录G是资料性附录。 本标准由辽宁省绿色建筑协会提出并负责解释。 本标准为首次发布，并面向社会公开。望各会员单位在工作实践中注意积累资料，总结经验，以供今后修订时参考。

Standard for indoor environment purification treatment service

DB11/T 1495-2017 村庄生活污水收集与处理技术规程

Technical regulations for collection and treatment of domestic sewage in villages

DB22/T 2764-2017 清洁生产评价指标体系 糠醛工业

Cleaner production evaluation index system furfural industry

T/CQSES 02-2017 重庆市电镀行业废水污染物自愿性排放标准

本标准以《电镀污染物排放标准》（GB 21900-2008）中表3的排放限值为基础，在国内现有电镀废水治理先进技术及其实际稳定运行案例污染物排放水平的基础上，对电镀企业污水排放提出了较GB 21900-2008表3更为严格的排放限值，供行业内先进企业、工业园区自愿选择执行。电镀企业排放恶臭污染物、环境噪声适用相应的国家或地方污染物排放标准，产生固体废物的鉴别、处理和处置适用国家或地方固体废物污染控制标准。

Voluntary discharge standard of pollutants for electroplating wastewater in Chongqing

ISO 27914:2017 二氧化碳捕获、运输和地质储存. 地质储存

This document a) establishes requirements and recommendations for the geological storage of CO2 streams, the purpose of which is to promote commercial, safe, long-term containment of carbon dioxide in a way that minimizes risk to the environment, natural resources, and human health, b) is applicable for both onshore and offshore geological storage within permeable and porous geological strata including hydrocarbon reservoirs where a CO2 stream is not being injected for the purpose of hydrocarbon production or for storage in association with CO2-EOR, c) includes activities associated with site screening and selection, characterization, design and development, operation of storage sites, and preparation for site closure, e) acknowledges that permitting and approval by regulatory authorities will be required throughout the project life cycle, including the closure period, although the permitting process is not included in this document, d) recognizes that site selection and management are unique for each project and that intrinsic technical risk and uncertainty will be dealt with on a site-specific basis, f) provides requirements and recommendations for the development of management systems, community and other stakeholder engagement, risk assessment, risk management and risk communication, g) does not apply to, modify, interpret, or supersede any national or international regulations, treaties, protocols or instruments otherwise applicable to the activities addressed in this document, and h) does not apply to or modify any property rights or interests in the surface or the subsurface (including mineral rights), or any pre-existing commercial contract or arrangement relating to such property. The life cycle of a CO2 geological storage project covers all aspects, periods, and stages of the project, from those that lead to the start of the project (including site screening, selection, characterization, assessment, engineering, permitting, and construction), through the start of injection and proceeding through subsequent operations until cessation of injection and culminating in the post-injection period, which includes a closure period. Figure 1 illustrates the limits of this document. NOTE 1 This document does not address any post-closure period or specify post-closure period requirements. This document does not apply to — the post-closure period, — injection of CO2 for enhancing production of hydrocarbons or for storage associated with CO2-EOR, — disposal of other acid gases except as considered part of the CO2 stream, — disposal of waste and other matter added for purpose of disposal, — CO2 injection and storage in coal, basalt, shale and salt caverns, or — underground storage using any form of buried container.  1  NOTE 2 This document may not be suitable for research projects, for example, those with a primary objective to test technologies or methods of monitoring. NOTE 3 The closure period in this document does overlap with the post-closure phase of the EU regulatory definition. This document, however, is not concerned with transfer of liability. Figure 1 — Entities involved in the storage project life cycle

Carbon dioxide capture, transportation and geological storage - Geological storage

DB41/ 1424-2017 燃煤电厂大气污染物排放标准

Air pollutant emission standards for coal-fired power plants

T/GIEHA 001.1-2017 室内环境污染治理工程技术服务规范 装修（饰）污染治理工程

本标准规定了室内环境污染治理工程中装修（饰）污染治理工程（以下简称“治理工程”）的基本要求、服务内容、仪器设备、净化产品、施工流程、工程验收、评估报告和跟踪服务。

Engineering technical service specification for indoor environmental purification and treatment—decoration pollution treatment engineering

ISO/TR 27915:2017 二氧化碳捕获、运输和地质储存.量化和验证

Carbon dioxide capture, transportation and geological storage — Quantification and verification

ASTM F1693-17 将生物修复考虑为陆上溢油应急方法的标准指南

Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

T/CZACA 4-2017 松花石加工企业环境保护指南

本标准规定了松花石加工企业环境保护的术语和定义、厂址选择和总平面布置、环境保护设计的总体要求。

Environmental protection guide of Songhua Stone processing enterprises

DB42/T 1276-2017 湖北省在用汽车排气污染物排放限值及检测方法（遥测法）

Limits and detection methods of exhaust pollutants from in-use vehicles in Hubei Province (telemetry method)

DB11/T 1426-2017 汽车维修业污染防治技术规范

Technical specification for pollution prevention and control of automobile maintenance industry

17/30334569 DC BS ISO 14080 温室气体管理和相关活动 气候行动方法的框架和原则

BS ISO 14080. Greenhouse gas management and related activities. Framework and principles for methodologies on climate actions

ASTM F2683-11(2017) 选择用于溢油应急的悬臂的标准指南

1.1 This guide covers the selection of boom for the containment and recovery of marine oil spills. 1.2 This guide does not address the compatibility of spillcontrol equipment with spill products. It is the user’s responsibility to ensure that any equipment selected is compatible with anticipated products and conditions. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selection of Booms for Oil-Spill Response

DB65/T 3997-2017 油气田钻井固体废物综合利用污染控制要求

Pollution Control Requirements for Comprehensive Utilization of Oil and Gas Field Drilling Solid Waste

DB65/T 3999-2017 油气田含油污泥及钻井固体废物处理处置技术规范

Technical Specifications for Treatment and Disposal of Oily Sludge and Drilling Solid Waste in Oil and Gas Fields

DB65/T 3998-2017 油气田含油污泥综合利用污染控制要求

Pollution Control Requirements for Comprehensive Utilization of Oily Sludge in Oil and Gas Fields