13.030.10 固态废物 标准查询与下载



共找到 308 条与 固态废物 相关的标准,共 21

本标准规定了测定固体废物浸出液中铜、锌、铅、镉的直接吸入火焰原子吸收分光光度法。 本标准方法适用于固体废物浸出液中铜、铅、锌和镉的测定。

Solid waste--Determination of copper, zinc, lead, cadmium-- Atomic absorption spectrometry

ICS
13.030.10
CCS
Z27
发布
1995-03-28
实施
1996-01-01

本标准规定了测定固体废物浸出液中氟化物的氟离子选择电极法。 本标准方法适用于固体废物浸出液中氟化物的测定。

Solid waste--Determination of fluoride--Ion selective electrode method

ICS
13.030.10
CCS
Z27
发布
1995-03-28
实施
1996-01-01

本标准规定了测定固体废物浸出液中总铬的硫酸亚铁铵滴定法。 本标准方法适用于固体废物浸出液中总铬的测定,方法也可测定水和废水中的总铬。

Solid waste--Determination of total chromium--Titrimetric method

ICS
13.030.10
CCS
Z27
发布
1995-03-28
实施
1996-01-01

本文件规定了有机固废低温绝氧碳化技术及其处理工程的技术规范,包含建设要求、系统构成及要求、污染控制要求、检查监测与运行维护等。 本文件适用于以有机固废为处理对象以低温绝氧碳化技术为主要处理工艺的有机固废处理工艺项目和协同处置工艺项目。

Technical specification for low temperature oxygen-free carbonization process engineering of organic solid waste

ICS
13.030.10
CCS
N772
发布
2024-06-20
实施
2024-07-20

1.1  This test method describes procedures for measuring the composition of unprocessed municipal solid waste (MSW) by employing manual sorting. This test method applies to determination of the mean composition of MSW based on the collection and manual sorting of a number of samples of waste over a selected time period covering a minimum of one week. 1.2  This test method includes procedures for the collection of a representative sorting sample of unprocessed waste, manual sorting of the waste into individual waste components, data reduction, and reporting of the results. 1.3  This test method may be applied at landfill sites, waste processing and conversion facilities, and transfer stations. 1.4  The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.5  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6 . 1.6  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

ICS
13.030.10
CCS
发布
2024-06-06
实施

Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

ICS
13.030.10
CCS
发布
2024-05-01
实施

Refined operation specifications for domestic waste incineration plants

ICS
13.030.10
CCS
Z05
发布
2024-04-24
实施
2024-05-01

范围;规范性引用文件;术语和定义;总则;评价条件核查;风险评价准备;风险识别;风险分析;风险等级划分;评价报告编制。

Technical guidelines for risk assessment of hazardous waste operation units

ICS
13.030.10
CCS
N772
发布
2024-04-19
实施
2024-04-19

本标准规定了锅炉/工业密炉协同处理固体废物的总体要求与原则、固体废物配伍过程的污染控制含量、锅炉/工业窑炉处理固体废物过程的监测方法。具体规定内容如下:(1)明确锅炉/工业窑炉协同处理固体废物所需符合的合规性、相容性、稳定性总体原则,及在运行过程中所需满足的安全运行、契合行业规定、污染物控制达标等总体要求;(2)明确协同处理固体废物所含水分、热值、有害元素、低熔点物料含量,对所处理固体废物的配伍物料控制进行规定;(3)基于当前国家、行业、地方标准及工业化处理方式等,对固体废物配伍方案和步骤进行规定;(4)基于固体废物的贮存场地、输送与转运方式、预处理手段,对固体废物配伍过程的污染控制进行规定;(5)对锅炉/工业密炉协同处理固体废物的全过程监测要求进行说明。本标准的执行可有效实现多源固体废物的减量化和资源化利用,为我国协同处置行业绿色发展提供有效支撑。

General technical guidelines for proportioning of solid wastes co-processed in boiler and industrial kiln

ICS
13.030.10
CCS
N772
发布
2024-04-16
实施
2024-04-16

第四章基本要求,对废旧电器电子产品回收经营者应具备的经营条件、从业人员、固定场地场所、设施设备和信息管理系统等做出规定。 第五章服务流程,分别对收集、运输、入库分拣、贮存、增值等服务流程提出具体要求。 第六章信息管理,对记录追溯信息、记录保存、信息管理系统等提出要求。 第七章服务评价与改进,对废旧电器电子产品逆向物流服务定期评价、评价指标及改进等做出规定。 附录A作为规范性附录,给出了废旧电器电子产品逆向物流服务评价指标、指标内容与计算方法。

Specification of reverse logistics service for used electrical and electronic product

ICS
13.030.10
CCS
N772
发布
2024-04-12
实施
2024-04-19

本文件规定了铜阳极泥处理过程中产生的各种贵金属熔炼渣、吹炼渣,含贵金属中间物料及含银硒等贵金属浸出渣等物料(以下简称“高杂贵金属冶炼渣”)的来源、处理的总体要求、企业管理要求、高杂贵金属冶炼渣资源化利用方法、环保要求。

Technical specification for resource treatment of high impurity rare precious metal smelting slag

ICS
13.030.10
CCS
N772
发布
2024-04-01
实施
2024-04-08

本文件规定了铅锌冶炼铊污染防治环境管理的总体要求、企业管理要求、生态环境和安全要求以及铊污染防治关键技术标准要求。

Environmental Management Guidelines for Prevention and Control of Thallium Pollution in Lead Zinc Smelting

ICS
13.030.10
CCS
N772
发布
2024-04-01
实施
2024-04-08

红土镍矿中钪含量在50 g/t~600 g/t之间,被认为是未来最有前景的钪资源。在红土镍矿湿法冶金过程中,钪当作副产品被回收利用。忽略了钪金属本身的经济价值和应用前景,全流程回收率约为45%,未实现红土镍矿中钪的高效提取及高值化制备。本标准可为红土镍矿冶炼企业提供必要的技术支持,指导企业规范从红土镍矿冶金中和渣中提取钪。对红土镍矿冶炼企业产生的浸出液中和铁铝渣采用优溶浸出-萃取-沉淀-煅烧工艺生产氧化钪,可实现副产物的资源循环利用。研究镍钴冶炼渣中杂质行为及钪高效溶出与分离机制;通过优选萃取剂及萃取过程强化,实现钪的高效分离富集。

Technical specification for extraction of scandium in neutralize slag of laterite nickel ore magnetically process

ICS
13.030.10
CCS
C323
发布
2024-03-31
实施
2024-03-31

Treatment and disposal methods of iron, aluminum and calcium slag in waste battery treatment

ICS
13.030.10
CCS
Z05
发布
2024-03-29
实施
2024-10-01

Technical Specifications for Comprehensive Utilization of Pollution Control Containing Heavy Metal Sludge

ICS
13.030.10
CCS
Z 05
发布
2024-03-25
实施
2024-04-25

本文件规定了绿色纺织与棉纺固废资源化技术规范的术语和定义、收集与运输、预处理、资源化利用技术、环境保护与安全卫生要求、检验检测、标识、包装、运输和贮存、质量保证与控制。 本文件适用于绿色纺织与棉纺固废资源化技术。

Technical Specifications for Green Textile and Cotton Textile Solid Waste Recycling

ICS
13.030.10
CCS
N772
发布
2024-03-15
实施
2024-03-30

Determination of Zinc Content in Iron and Steel Metallurgical Dust Flame Atomic Absorption Spectrophotometry and EDTA Titration

ICS
13.030.10
CCS
Z 10/39
发布
2024-02-02
实施
2024-03-02

开发了一种混凝沉淀-固氟提钨新工艺,该工艺能够高效提取白钨渣中金属钨资源,同时有效固定白钨渣中的氟离子,降低其浸出毒性。根据《固体废物浸出毒性浸出方法硫酸硝酸法》,该工艺处理后的白钨渣中F- 是否包含专利信息   是 标准文本   不公开

Technical Specifications for Comprehensive Recovery and Disposal of Scheelite Slag

ICS
13.030.10
CCS
M732
发布
2024-01-31
实施
2024-01-31

本文件规定了邻苯二甲酸酐残渣再生利用与处置过程中的规范性引用文件、术语和定义、总体要求、收集运输与贮存、预处理、再生利用与处置、污染物排放控制、产品质量等要求。 本文件适用于邻苯二甲酸酐残渣再生利用与处置的新建、改建和扩建项目。

Technical specification for recycling and disposal of phthalic anhydride residue

ICS
13.030.10
CCS
N772
发布
2024-01-31
实施
2024-01-31

本文件规定了一般工业固体废物统一收运单位建设与运营的基本要求、设施建设、运营服务、日常管理等内容。本文件适用于《固体废物分类与代码目录》所列的食品残渣(SW13)、纺织皮革业废物(SW14)、造纸印刷业废物(SW15)、可再生类废物(SW17)、其他工业固体废物(SW59)等一般工业固体废物统一收运单位的建设与运营活动。

Guideline for the construction and operation of unified collection and transportation units for general industrial solid waste

ICS
13.030.10
CCS
N772
发布
2024-01-30
实施
2024-02-29



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号