13.030.20 液态废物、淤泥 标准查询与下载
共找到 383 条与 液态废物、淤泥 相关的标准，共 26 页
本部分告知了磷酸的理化性质和危害性,规定了发生磷酸泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本部分适用于磷酸在生产、经营、使用、贮存、运输等过程中发生泄漏时的处理、处置。
Treatment and disposal method for acids spill.Part 4:Phosphoric acid
- ICS
- 13.030.20
- CCS
- Z05
- 发布
- 2012-12-28
- 实施
- 2013-06-01
本标准规定了城市生活污水再生利用设施的设计、运营单位、运营管理、自我评价、和运行质量综合评分管理等内容。本标准适用于城市生活污水再生利用设施的运营管理。
Operation and management specifications for urban domestic sewage recycling facilities
- ICS
- 13.030.20
- CCS
- Z 66
- 发布
- 2012-12-01
- 实施
- 2013-03-01
Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration; German version FprEN 14701-2:2012
- ICS
- 13.030.20
- CCS
- Z23
- 发布
- 2012-09-01
- 实施
Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment)
- ICS
- 13.030.20
- CCS
- Z16
- 发布
- 2012
- 实施
Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds; German version CEN/TS 16229:2011
- ICS
- 13.030.20
- CCS
- Z12
- 发布
- 2011-09
- 实施
Sludge recovery, recycling, treatment and disposal — Guidelines for risk communication and management of public perception
- ICS
- 13.030.20
- CCS
- 发布
- 2011-04
- 实施
Characteristic of hazardous and poisonous material waste - Part 3: Test method of flash point in liquid and semi-solid waste
- ICS
- 13.030.20
- CCS
- 发布
- 2011
- 实施
警告：使用本标准的人员应有现场测定工作的实践经验。本标准并未指出所有的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 警告：现场测定时要求带安全帽、眼镜及乳胶手套等劳保用品。取样时需加小心。 YS/T 119的本部分规定了氧化铝生产(包括烧结法和联合法)粗液间接加热脱硅系统的热平衡测定与计算基准、测定条件、测定项目及测定计算方法。 本部分适用于氧化铝生产蒸汽间接加热脱硅系统的热平衡测定与计算。
Determination and calculation of heat balance of special equipments for alumina production.Part 12:Indirect heating desiliconizing system
- ICS
- 13.030.20
- CCS
- H92
- 发布
- 2010-11-22
- 实施
- 2011-03-01
本标准规定了电解铝净化系统中气态氟化物浓度的测定方法。 本标准适用于电解铝净化系统中气态氟化物浓度的测定,测定范围: 0.1 mg/m-500 mg/m。 本标准也适用于其他污染源中气态氟化物浓度的测定。
Determination of gaseous flouride in purification system for electrolyzed aluminium by alkali-paper sampling and fluorine ion-selective electrode analysis
- ICS
- 13.030.20
- CCS
- H12
- 发布
- 2010-11-22
- 实施
- 2011-03-01
本标准规定了氧化铝工业废水中苛性碱度的测定方法。 本标准适用于氧化铝工业废水中苛性碱度的测定,测定范围:50 mg/L-1 000 mg/L。 本标准也适用于其他行业含铝的碱性废水中苛性碱度的测定。
Method for determination of caustic alkalinity in wastewater of alumina industry
- ICS
- 13.030.20
- CCS
- H12
- 发布
- 2010-11-22
- 实施
- 2011-03-01
This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling; b) urban wastewater collecting systems; c) urban wastewater treatment plants; d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); e) water supply treatment plants. This method is also applicable to sludge suspensions from other origin.
Characterization of sludges. Filtration properties. Part 4: Determination of the drainability of flocculated sludges
- ICS
- 13.030.20
- CCS
- Z12
- 发布
- 2010-08-31
- 实施
- 2010-08-31
This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling;b) urban wastewater collecting systems;c) urban wastewater treatment plants;d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);e) water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
- ICS
- 13.030.20
- CCS
- 发布
- 2010-05-12
- 实施
- 2010-05-12
This document specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from storm water handling, urban wastewater collecting systems, urban wastewater treatment plants, treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC) and water supply treatment plants. This method is also applicable to sludge suspensions from other origin. Anycase, it is applicable to all kinds of sludges provided particles are larger than 500 ?m in size. That is why the test should preferably be performed on sludges first flocculated.
Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges; German version EN 14701-4:2010
- ICS
- 13.030.20
- CCS
- Z23
- 发布
- 2010-05
- 实施
Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
- ICS
- 13.030.20
- CCS
- 发布
- 2010-04-30
- 实施
- 2010-04-30
Characterisation of sludges - Filtration properties - Part 4 : determination of the drainability of flocculated sludges.
- ICS
- 13.030.20
- CCS
- Z16
- 发布
- 2010-03-01
- 实施
- 2010-03-03
This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling; b) urban wastewater collecting systems; c) urban wastewater treatment plants; d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); e) water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
- ICS
- 13.030.20
- CCS
- 发布
- 2010-01-01
- 实施
Characterization of hazardous and toxic wastes (B3) Part 4: Method for testing corrosion rates of liquid and semi-solid wastes using the hook method
- ICS
- 13.030.20
- CCS
- 发布
- 2010
- 实施
This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. In this European Standard the net calorific value at constant volume is described as it requires less additional determinations. This method is applicable to all kinds of sludges.
Characterization of sludges - Determination of calorific value
- ICS
- 13.030.20
- CCS
- Z12
- 发布
- 2009-06-30
- 实施
- 2009-06-30
This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.
Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
- ICS
- 13.030.20
- CCS
- Z12
- 发布
- 2009-05-31
- 实施
- 2009-05-31
This CEN Technical Report gives information about principles to be followed in different sludge treatment processes to reach specified hygienic requirements.
Characterization of sludges - Hygienic aspects - Treatments
- ICS
- 13.030.20
- CCS
- 发布
- 2009-05-18
- 实施
- 2009-05-18
