13.030.20 液态废物、淤泥 标准查询与下载

BS EN 15216:2007 废弃物的表征.水和洗出液中总溶解固体量(TDS)的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

DS/CEN/TR 15809:2009 污泥的特性 卫生方面 处理

This CEN Technical Report gives information about principles to be followed in different sludge treatment processes to reach specified hygienic requirements.

Characterization of sludges - Hygienic aspects - Treatments

BS PD CEN/TR 15809:2008 污泥的特性.卫生方面.处理

This CEN Technical Report gives information about principles to be followed in different sludge treatment processes to reach specified hygienic requirements.

Characterization of sludges — Hygienic aspects — Treatments

DS/EN 15170:2009 污泥的表征-热值的测定

This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid.The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at

Characterization of sludges - Determination of calorific value

NF X33-036*NF EN 15170:2009 污泥的特性.生热值的测定

Characterization of sludges - Determination of calorific value.

ASTM D6759-09 用抓斗采样器和离散深度采样器对液体取样的标准实施规程

Sampling at specified depth(s) within a liquid may be needed to confirm or rule out variations within a target population. This practice describes the design and operation of commercially available grab and discrete depth samplers for persons responsible for designing or implementing sampling programs, or both. These sampling devices are used for sampling liquids in tanks, ponds, impoundments, and other open bodies of water. Some may be used from the edge or bank of the sampling site, whereas some can only be used from a platform, boat, or bridge over the sampling site. Some of the devices described are suitable for sampling slurries and sludges as well as aqueous and other liquids with few or no suspended solids. Practice D 5743 provides guidance for sampling drums, tanks, or similar containers. This practice does not address general guidelines for planning waste sampling activities (Guide D 4687), development of data quality objectives (Practice D 5792), the design of monitoring systems and determination of the number of samples to collect (Practice D 6311), in situ measurement of parameters of interest, data assessment and statistical interpretation of resultant data (Guide D 6233), sample preservation, sampling and field quality assurance (Guide D 5612), or the selection of sampling locations or obtaining a representative sample (Guide D 6044).1.1 This practice describes sampling devices and procedures for collecting samples of liquids or sludges, or both, whose upper surface can be accessed by the suitable device. These devices may be used to sample tanks that have an appropriately sized and located sampling port. 1.2 This practice describes and discusses the advantages and limitations of the following commonly used equipment, some of which can be used for both grab and discrete depth sampling: dipper, liquid grab sampler, swing jar sampler, Bacon Bomb, Kemmerer sampler, Discrete Level sampler, liquid profiler, lidded sludge/water sampler, peristaltic pump, and the Syringe sampler. 1.3 This practice provides instructions on the use of these samplers. 1.4 This practice does not address sampling devices for collecting ground water. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

DB31/T 403-2008 城镇污水厂污泥应用于园林绿化的技术要求

本标准规定了以城镇污水厂污泥为原材料，经过无害化处理加工后用于绿化的土壤改良材料、栽培基质的产品质量表尊和应用技术要求。确立了用于绿化的土壤改良材料、栽培基质的污泥产品质量要求、使用技术要求和监测要求。 本标准不适用于工业污水处理厂产生的污泥，不适用于影响食物链的经济果林、农田和水源保护区的绿化林带。

Technology requirements for the utilization of sludge from municipal wastewater treatment plant on garden greening

DS/EN 15216:2008 废物表征 水和洗脱液中总溶解固体（TDS）的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

LST EN 15216-2008 废物表征 水和洗脱液中总溶解固体（TDS）的测定

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

DIN EN 15216:2008 废弃物的特征.水中和提取液中溶解固体总量(TDS)的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/[ of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates; English version of DIN EN 15216:2008-01

EN 15170:2008 淤泥特性.生热值的测定

This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 ℃ in a bomb calorimeter calibrated by combustion of certified benzoic acid. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. InThis European Standard the net calorific value at constant volume is described as it requires less additional determinations.This method is applicable to all kinds of sludges.

Characterization of sludges - Determination of calorific value

DS/CEN/TR 15584:2007 污泥的特征 风险评估指南，特别是与污泥的使用和处置相关的风险评估

The Scope of this document includes sludges from treating municipal, industrial and food processing wastewaters, sludge from treating raw water to make it potable, and other residues having similar potential environmental impacts.The purpose of this document is to discuss risk assessment in general and especially as it has been applied to sludges for an audience of specialists and non-specialists. The objective is to set risk assessment in the context of policy making and operating sludge use and disposal.

Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges

NF X30-480:2007 废弃物的特征.水中和提取液中溶解固体总量(TDS)的测定

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates.

BS PD CEN/TR 15473:2007 淤泥特性.淤泥烘干用良好实施规程

This CEN Technical report describes good practices for sludge drying and it is one of a series on sludge management options. It gives guidance on - drying processes; - characteristics of dried sludge products; - recycling or disposal of dried sludge products. from urban wastewater treatment plants. Sludges of other origin, like sludge from water supply or industrial treatment plants are not in the exact scope of this CEN Technical Report, however the handling of most of these sludges will comply to a large extent with the leads given in this CEN Technical Report.

Characterization of sludges — Good practice for sludges drying

BS PD CEN/TR 15463:2007 淤泥的特性.物理粘合性、触变性能和堆叠性能

1.1 The Horizontal project and the Work Package 7 The revision of the Sewage Sludge Directive 86/278/EEC, the upcoming Composting Directive on the biological treatment of biodegradable waste and the Soil Monitoring Directive call for standards on sampling, hygienic and biological parameters, methods for inorganic and organic contaminants, and for mechanical properties of these materials. 1.2 Desk study subject The Task Group 3 (TG3) of CEN/TC308/WG1 defined 3 physical states for sludge (CEN/TC308/WG1/TG3, 2000): a) Liquid: sludge flowing under the effect of gravity or pressure below a certain threshold. b) Paste-like: sludge capable of continuous flow under the effect of pressure above a certain threshold and having a shear resistance below a certain threshold. c) Solid: sludge having a shear resistance above a certain threshold. 1.3 Evaluation of needs for control of operations and material characteristics 1.3.1 Evaluation of needs for control of operation 1.3.2 Material characteristics 1.4 Search for existing standards and methods The first action carried out consisted in searching for existing standards and non-standardised methods to be possibly used or adapted for utilisation in the specific field of consistency evaluation. 1.5 Basic information

Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour

DS/CEN/TR 15463:2007 污泥的表征 物理稠度 触变行为和堆积行为

This CEN-Report """"Physical Consistency"""" derives from the Desk Studies """"Physical Properties -Flowability""""(HORIZONTAL Report No. 21 [60]) and """"Physical Properties - Solidity, Thixotropic Behaviour andPiling Behaviour"""" (HORIZONTAL Report No. 22 [61]) of the Horizontal Project. The """"Horizontal"""" project hasthe objective to develop horizontal and harmonised European standards in the fields of sludge, bio-waste andsoil to facilitate regulation of these major streams in the multiple decisions related to different uses anddisposal governed by EU Directives. The Horizontal Project includes the Work Package 7 """"Mechanicalproperties"""" consist

Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour

DS/CEN/TR 15473:2007 污泥的特性 污泥干化的良好实践

This CEN Technical report describes good practices for sludge drying and it is one of a series on sludge management options. It gives guidance on - drying processes;- characteristics of dried sludge products;- recycling or disposal of dried sludge products.from urban wastewater treatment plants. Sludges of other origin, like sludge from water supply or industrial treatment plants are not in the exact scope of this CEN Technical Report, however the handling of most of these sludges will comply to a large extent with the leads given in this CEN Technical Report.

Characterization of sludges - Good practice for sludges drying

DS/CEN/CR 13846:2007 保护和扩大污泥利用和处置路线的建议

Increased material flows in the environment are a natural consequence of development, however, for sustainable growth the flows particularly of wastes have to be managed in order to conserve resources and protect the environment.

Recommendations to preserve and extend sludge utilization and disposal routes

BS EN 14701-3:2006 淤泥特征.过滤特性.第3部分:可压缩性的测定

This document specifies a method to determine the compressibility of sludges, conditioned or not. This document is applicable to sludges and sludge suspensions from: - storm water handling; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); - water supply treatment plants. This method is also applicable to sludge and sludge suspensions of other origin.

Characterization of Sludges. Filtration Properties. Part 3: Determination of the Compressibility

BS EN 14701-2:2007 污泥的特性描述 过滤性能 过滤比阻的测定

Characterization of sludges - Filtration properties - Determination of the specific resistance to filtration