共找到 385 条与 液态废物、淤泥 相关的标准,共 26 页
This European standard specifies a procedure for the determination of extractable ammonia using 2 mol/l potassium chloride solution in raw and digested sewage sludges. The range of the method is up to 100 g/kg N assuming appropriate dilution of the potassium chloride extract in the final measurement step.
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride English version of DIN EN 14671:2006-09
This document specifies a method for the determination of the capillary suction time. This document is applicable to sludge and sludge suspensions from:- storm water handling;- urban wastewater collecting systems;- urban wastewater treatment plants;- treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);- water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST)
This Technical Report specifies procedures for validating characterization methods for physical properties of sludge.This Technical Report is applicable to sludge and sludge suspensions from:- storm water handling;- urban wastewater collecting systems;- urban wastewater treatment plants;- treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);- water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterization of sludges - Protocol for validating methods for physical properties of sludges
This Technical Report specifies a procedure for the chemical conditioning in laboratory of sludges.This Technical Report is applicable to sludges and sludge suspensions from:- storm water handling;- urban wastewater collecting systems;- urban wastewater treatment plants;- treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);- water supply treatment plants.This method is applicable to sludge and sludge suspensions of other origin
Characterization of sludges - Laboratory chemical conditioning procedure
This document specifies a method to determine the compressibility of sludges, conditioned or not.This document is applicable to sludges and sludge suspensions from: storm water handling; urban wastewater collecting systems; urban wastewater treatment plants; treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); water supply treatment plants.This method is also applicable to sludge and sludge suspensions of other origin.
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility
This document specifies a method for the determination of the settleability of sludge suspensions. This document is applicable to sludge suspensions from:- storm water handling;- urban wastewater collecting systems;- urban wastewater treatment plants;- treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271 EEC);- water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
This European standard specifies a procedure for the determination of extractable ammonia using a 2 mol/l potassium chloride solution in raw and digested sewage sludges. The range of the method is up to 100 g/kg N assuming appropriate dilution of the potassium chloride extract in the final measurement step. The above wording will be modified once the round robin results are available. It may be suitable for other types of sludges, but the user should validate the method using these sludges.
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
This European Standard specifies a procedure for complete digestion of raw/digested sludge, suitable for the subsequent determination of phosphorus. NOTE Phosphorus in environmental samples can be present in many forms. This method of pre-treatment enables the analyst to determine all forms - i.e. total phosphorus, by quantitative oxidation yielding an aqueous solution of orthophosphate which should be analysed for phosphate according to method EN ISO 6878, EN ISO 10304-2 or an equivalent validated method. The range of the method is up to 50 g/kg P assuming appropriate dilution of the digest in the final measurement step.
Characterization of sludges - Determination of total phosphorous
Characterisation of sludges - Settling properties - Part 2 : determination of thickenability.
Characterization of sludges - Filtration properties - Part 1 : capillary suction time (CST).
Characterization of sludges - Settling properties - Part 1 : determination of settleability (Determination of the proportion of sludge volume and sludge volume index).
This European standard specifies a procedure for the determination of extractable ammonia using a 2 mol/l potassium chloride solution in raw and digested sewage sludges. The range of the method is up to 100 g/kg N assuming appropriate dilution of the potassium chloride extract in the final measurement step.NOTE The above wording will be modified once the round robin results are available. It may be suitable for other types of sludges, but the user should validate the method using these sludges.
Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
This document specifies a method to determine the compressibility of sludges, conditioned or not.This document is applicable to sludges and sludge suspensions from:storm water handling;urban wastewater collecting systems;urban wastewater treatment plants;treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);water supply treatment plants.This method is also applicable to sludge and sludge suspensions of other origin.
Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility
This standard specifies a method for the determination of the capillary suction time of sludge and sludge suspensions. The capillary suction time (CST) is a fast and simple way to evaluate the sludge dewaterability by filtration. This method gives no information on the obtainable solids content in a dewatering process. The measurement of CST should also make possible the evaluation, although only qualitatively, of other sludge characteristics, including dewaterability by centrifugation.#,,#
Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) English version of DIN EN 14701-1:2006-06
Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) English version of DIN EN 14702-1:2006-06
This standard specifies a method for the determination of the thickenability of sludge suspensions. Determination of the thickenability, i.e. the further concentration of suspended (undissolved) sludge solids in settling under gravity, through the use of laboratory mechanical assisted cylinders is negatively affected by bridging, wall effects and particle size effects. Ideally, this parameter should be measured in large-diameter columns having the same depth as the prototype thickener, but above effects can be satisfactory overcome by introducing a low-speed stirrer in a cylinder; this also helps to reduce the effect of the shallow depth.#,,#
Characterisation of sludges - Settling properties - Part 2: Determination of thickenability English version of DIN EN 14702-2:2006-06
Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST)
Characterisation of sludges - Settling properties - Part 2: Determination of thickenability
This document specifies a method for the determination of the thickenability of sludge suspensions. This document is applicable to sludge suspensions from:storm water handling; urban wastewater collecting systems; urban wastewater treatment plants;treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271 EEC); water supply treatment plants.This method is also applicable to sludge suspensions from other origin.
Characterisation of sludges - Settling properties - Part 2: Determination of thickenability
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号