13.030.99 有关废物的其他标准 标准查询与下载

DB3206/T 1044-2023 农村生活垃圾分类设施设置规范

本文件规定了垃圾分类设施设备类别、垃圾分类设施设置、分类设施的颜色和标志等。 本文件适用于南通地区农村生活垃圾分类设施设置规范和要求。

Specifications for setting up facilities for sorting domestic waste in rural areas

DB43/T 2568-2023 挥发性有机物吸附浓缩催化燃烧处理设备通用技术条件

General Technical Specifications for Volatile Organic Compound Adsorption Concentration Catalytic Combustion Treatment Equipment

T/GDES 73.2-2023 机电产品绿色设计知识 第2部分：数据库建设规范

本文件规定了机电产品绿色设计知识数据库的术语和定义、建设原则、建库流程、内容和质量要求、安全保障和运行维护。 本文件适用于机电产品绿色设计知识数据库建设，其他产品绿色设计知识的数据库建设也可参照执行。

Green design knowledge for mechanical and electrical products— Part 2：Specification for database construction

DB2102/T 0074-2023 公共机构生活垃圾分类工作评价规范

Standards for Evaluation of Domestic Garbage Sorting in Public Institutions

T/STACAES 034-2023 生活垃圾集装化运输中转站运营及管理规范

本文件主要规定了生活垃圾集装化运输中转站： 一、作业要求包括一般要求、清运车进出站、卸料作业、压缩作业、集运车作业和保洁作业等。 二、管理要求包括    1.环境管理要求（一般要求、污水处理、异味处理、灭害处理等）;    2.人员管理要求；    3.设施设备管理要求；    4.安全管理（消防安全、作业安全）要求;    5.持续改进要求。

Specification on operation and management for the transfer station of municipal domestic waste containerized transportation

DB3311/T 237-2023 医疗机构医疗废物收集暂存规范

Technical specifications for artificial breeding of horsemouth

ASTM E3332-23 测定雨水控制措施的垃圾和/或碎片捕获性能的标准试验方法

1.1 The scope of this standard is to provide test criteria for the evaluation of Stormwater Control Measures (SCM), especially Manufactured stormwater Treatment Devices (MTDs), for the removal of trash and/or debris greater than 5 mm in at least two dimensions in a laboratory setting. The use of this standard in conjunction with an appropriate verification program allows for the publication of verified reporting for use in gaining certification by Authorities Having Jurisdiction (AHJs). 1.2 For the purpose of this method, a Trash Capture Device (TCD) is an SCM that has the capacity to capture and retain trash and or debris. This may be the primary objective of the device or it may be a secondary feature of a device designed primarily as a Hydrodynamic Separator (HDS) or a filter for capturing sediment particles. This protocol does not address the sediment removal of such devices. 1.3 Units—The values stated in inch-pound units are to be regarded as standard, except for methods to establish and report sediment concentration and particle size. It is convention to exclusively describe sediment concentration in mg/L and particle size in mm or µm, both of which are SI units. The SI units given in parentheses are mathematical conversions, which are provided for information purposes only and are not considered standard. Reporting of test results in units other than inch-pound units shall not be regarded as nonconformance with this test method. 1.4 Acceptance of test results attained according to this specification may be subject to specific requirements set by a Quality Assurance Project Plan (QAPP), a specific verification protocol, or AHJ. It is advised to review one or all of the above to ensure compliance 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures

DB11/T 2033-2022 餐厨垃圾源头减量操作要求

Operational Requirements for Food Waste Source Reduction

DB13/T 5216-2022 建设用地土壤污染风险筛选值

Soil pollution risk screening value of construction land

T/GDES 73.1-2022 机电产品绿色设计知识 第1部分:表达

本文件规定了机电产品绿色设计知识的分类以及绿色设计知识表达原则等。 本文件适用于机电产品绿色设计知识表达的构建，其他产品也可参考使用。

Green design knowledge for mechanical and electrical products—Part 1:Expressions

ASTM E3073-22 建筑、拆除或拆除项目废物管理计划制定标准指南

1.1 The purpose of this guide is to facilitate development of a waste management plan for construction, deconstruction, or demolition projects (hereafter, construction waste management (CWM) plan). 1.2 This guide applies to CWM plans developed for construction, renovation, deconstruction, and demolition of buildings, factories, parking structures, and any other structure, as well as aboveand below-ground infrastructure. 1.3 This guide includes CWM plan guidance for the wastes generated on-site during construction, deconstruction, and demolition projects. NOTE 1—For example, included is any waste generated during these activities such as structural and finish materials and construction chemicals; construction product and materials packaging; construction office waste, including paper documents; wastes from site development work, such as excavated soils, rocks, vegetation, and stumps; and other ancillary items, such as broken tools, safety materials/personal protective equipment, and food and beverages and their packaging. The list of items above is offered for illustration purposes only; it is not intended to be fully inclusive of all materials from a construction, deconstruction, or demolition project that are suitable for reuse, repurposing, manufacturer reclamation, composting, or recycling. 1.4 Waste generated in the manufacture, preparation, or fabrication of materials before delivery to the job site are not in the scope of this guide. 1.5 This guide does not change or substitute for any federal, state, or local statutory or regulatory provisions or requirements including, but not limited to, those related to the handling, control, containment, transport, or disposition of any particular material. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects

ASTM D8410-22 城市或工业好氧堆肥设施中纤维素纤维基包装材料和产品的稳定性评价标准规范

1.1 This specification covers cellulosic-fiber-based packaging materials and products associated with food, landscape waste, and other compost feedstocks, which are intended to be composted under aerobic conditions in municipal and industrial composting facilities, where thermophilic temperatures are achieved. 1.2 This specification covers cellulosic-based uncoated and coated packaging materials and products and covers whole packaging products. Products covered in this specification include cellulosic fiber-based products produced from cellulosic pulp, corrugated materials, containerboard, paper, paperboard, and molded fiber. 1.3 This specification excludes end items where thermoplastic polymer is laminated or extruded to cellulosic substrates. 1.4 This specification is intended to establish the requirements for labeling cellulosic-fiber-based packaging materials and products as “compostable in aerobic municipal and industrial composting facilities” in accordance with the guidelines issued by the Federal Trade Commission,2 provided the label includes proper qualifications as to the availability of such facilities. 1.5 The properties in this specification are those required to determine if packaging materials and products will compost satisfactorily in large-scale aerobic municipal or industrial composting where maximum throughput is a high priority and where intermediate stages of biodegradation must not be apparent to the end user for aesthetic reasons. 1.6 This specification is technically equivalent to ISO 18606.1.7. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities

T/CAEE 011-2022 废线路板焚烧烟灰重金属高效固化剂技术性能标准

本文件规定了一般工业固废协同废线路板焚烧烟灰制备矿山充填胶凝材料的术语与定义、总体要求、技术要求、质量要求、质量检验规则、包装、运输和使用、污染物排放控制要求、环境和污染物检测要求、管理要求等。

Technical performance standard of heavy metal curing agent for incineration of ash of waste circuit board

DB31/T 1374-2022 垃圾房技术要求

Garbage room technical requirements

DB32/T 4370-2022 危险废物综合利用与处置技术规范 通则

General Rules of Technical Specifications for Comprehensive Utilization and Disposal of Hazardous Wastes

DB32/T 4372-2022 含铜蚀刻废液综合利用污染控制技术规范

Technical Specifications for Pollution Control of Comprehensive Utilization of Copper-containing Etching Waste Liquid

T/ZS 0450-2022 大件垃圾分类管理规范

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 基本要求　 5 类别　 6 分类投放与现场预处理　 6.1 投放点　 6.2 投放要求　 7 收运要求　 7.1 现场预处理　 7.2 运输车辆　 7.3 收运人员　 7.4 收运单位　 8 处理要求　 8.1 再利用　 8.2 拆解　

Management specification for bulky waste classification

T/ZS 0449-2022 各行业生活垃圾分类及收集规范

前言　 1 范围　 2 规范性引用文件　 3 术语和定义　 4 垃圾收集容器配置　 5 垃圾收集点　 6 日常管理　 6.1 一般要求　 6.2 特殊要求　 7 宣传辅导　 7.1 一般要求　 7.2 特殊要求　 8 收集清运　

Specification for various industries domestic waste classification and collection

T/STACAES 032-2022 有害垃圾收集运输及中转作业规范

本文件规定了有害垃圾收集运输及中转作业的总则及一下技术内容： 1.作业要求:收运作业、分拣作业、贮存作业三大环节的作业规范。 2.人员要求：由一般要求和驾驶员、收运员、分拣员的具体规范要求组成。 3.设施设备要求：由对收集容器、运输车辆、贮存场所规范要求。 4.运行管理要求：由作业管理、设备设施管理、信息化管理和EHS管理等规范要求。 5.评价与改进的要求。

Specification for the operation of hazardous waste collection, transportation and transit

DB3705/T 8-2022 幼儿园垃圾分类管理工作规范

Kindergarten waste classification management work specification