13.030.99 有关废物的其他标准 标准查询与下载

T/CAS 454-2020 火力发电企业二氧化碳排放在线监测技术要求

本标准规定了火力发电企业烟气二氧化碳排放在线监测系统（简称CDEMS）中的主要监测项目、性能指标、安装要求、数据采集处理方式、数据记录格式以及质量保证。 本标准适用于火力发电企业产生的二氧化碳排放量的在线监测。采用化石燃料（煤、天然气、石油等）为能源的工业锅炉、工业炉窑的二氧化碳排放量在线监测可参照执行。

Technical Requirements for Online Monitoring of Carbon Dioxide Emissions in Thermal Power Plants

DB34/T 3775-2020 公共机构生活垃圾分类实施规范

Standards for the Implementation of Domestic Garbage Sorting in Public Institutions

T/ZS 0150-2020 “物业+”生活垃圾分类管理规范

1 范围　 2 规范性引用文件　 3 术语和定义 4 基本要求　   4.1 一般要求　   4.2 管理要求　 5 设施建设和设备配置　   5.1 一般要求　   5.2 生活垃圾投放点　   5.3 生活垃圾集置点　   5.4 大件垃圾、装修垃圾、园林垃圾临时堆放点　   5.5 回收站点　   5.6 宣传设施　 6 宣传与指导　   6.1 宣传　   6.2 指导　 7 分类环节管理　   7.1 分类投放　   7.2 分类收运 8 评价与改进　 附录A（资料性）“物业+”生活垃圾分类工作职责　 参考资料　

"Property +" Household Garbage Sorting Management Specifications

BS PD CEN/TR 16192:2020 浪费 洗脱液分析指南

Waste. Guidance on analysis of eluates

BS EN 17417:2020 在缺氧（反硝化）条件下，确定塑料材料在水系统中的最终生物降解 压力增加测量方法

Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions. Method by measurement of pressure increase

DS/EN 17417:2020 塑料材料在缺氧（反硝化）条件下水系中最终生物降解的测定 压力增加测量法

Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions – Method by measurement of pressure increase

T/DLEPI 002-2020 机动车废机油收集与贮存管理规范

本文件规定了机动车废机油的术语和定义、收贮存的总体要求、废机油标识要求、收集污染控制技术要求、运输污染控制技术要求、贮存污染控制技术要求、转移联单管理、申报登记、应急管理及风险防控要求、设施设备管理要求及人员培训内容。

Management specification for collection and storage of motor vehicle waste engine oil

NF T51-816:2020 在缺氧(反硝化)条件下,水体系中塑料材料最终生物降解的测定. 压力增高的测量方法

Domaine d'applicationLe présent document spécifie une méthode pour la détermination de la biodégradation anoxique ultime des plastiques constitués de composés organiques, où la quantité d'azote et de dioxyde de carbone produite à la fin de l'essai est mesurée.La substance d'essai

Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions - Method by measurement of pressure increase

EN 17417:2020 在缺氧（反硝化）条件下水性系统中塑料材料最终生物降解的测定-通过测量压力增加的方法

Determination of the ultimate biodegradation of plastics materials in an aqueous system under anoxic (denitrifying) conditions - Method by measurement of pressure increase

T/GDACERCU 0008-2020 广东省工业固体废物管理规范

本标准规定了广东省内工业企业进行工业固体废物管理全过程的原则、职责和要求。

Management standard of industrial solid wastes in Guangdong province

DB3706/T 67-2020 海岛生活垃圾分类管理规范

Island Household Garbage Sorting Management Specifications

DB13/T 5216-2020-2021 建设用地土壤污染风险筛选值

本标准规定了建设用地分类,土壤污染风险筛选值及使用规则以及监测要求。本标准适用于建设用地土壤污染风险筛查。

Soil pollution risk screening value of construction land

DB13/T 5216-2020 建设用地土壤污染风险筛选值

Soil pollution risk screening value of construction land

DB4401/T 75-2020 城镇污水处理厂污泥厂内干化减量技术标准

Technical standards for in-plant drying and reduction of sludge in urban sewage treatment plants

T/GDACERCU 0006-2020 广东省资源综合利用企业评价规范

本标准规定了广东省资源综合利用企业评价的要求及程序。

Evaluate specification for enterprises of resources comprehensive utilization in Guangdong Province

T/SICA 001-2020 钛白粉用集成电路制造行业废硫酸

本标准规定了在用硫酸法工艺生产钛白粉时，采用集成电路制造行业废硫酸的要求，主要技术指标为 ，硫酸（H2SO4）≥60W/ %；过氧化氢（H2O2）≤0.5W/ %；铁（Fe）≤0.002W/ %；透明度≥100/mm；色度，深于标准色度；灰分≤0.01 W/ %；砷（As）≤　0.001W/ %；铅（Pb）≤0.02 W/ %。

Waste sulfuric acid in titanium dioxide manufacturing industry

DB31/T 1208-2020 湿垃圾处理残余物的生物稳定性评价方法

Biological Stability Evaluation Method for Wet Garbage Treatment Residues

ASTM D8273-20 碱性萃取后固体废物和土壤中总氰化物和有效氰化物的测定

1.1 This practice is used for the determination of total or available cyanide in solid waste, sediment and soil samples after alkaline extraction. Simple cyanide (CN) salts of group 1 and group 2 (alkali and alkaline earth) metals; soluble alkali and alkaline earth salts of zinc, copper, cadmium, mercury, nickel, silver, and iron cyanide complexes; and insoluble metal-metal cyanide complexes, such as Prussian blue, are quantitatively recovered. Gold, platinum group metals and cobalt cyanide complexes are not recovered during analysis. 1.2 Free cyanide cannot be determined due to the change of equilibrium conditions during the extraction process. 1.3 Cyanide complexes are extracted into an alkaline solution as described in this practice. Measure the total cyanide using Test Methods D7511 or D7284. Measure the available cyanide using Test Method D6888. Calculate cyanide content in the soil or waste. 1.4 The method detection limit (MDL) is dependent on the test method used to measure the cyanide content. Based on the methods cited, it is approximately 1 mg/kg and the minimum level (ML) is 5 mg/kg. The applicable range is also dependent on the test method used to measure cyanide. Based on the methods cited, it is 5 to 100 mg/kg. 1.5 This practice should be used by analysts experienced with extractions and flow injection analysis (FIA), or working under the close supervision of such qualified persons. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the document has been approved through the ASTM consensus process. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 9. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction

T/BGLM 0001.04-2019 生活垃圾宜生化性评价 易生化有机质沼气产量估算（BGQ）

通过分别测定生活垃圾样品中易生物降解的糖类、脂肪类和蛋白质类的含量，并分别利用其与生物发酵沼气产量的理论对应关系，得到生活垃圾样品的易生化有机质沼气产量。

Evaluation of biochemical suitability of domestic waste Estimation of biogas production of easily biochemical organic matter (BGQ)

T/BGLM 0001.01-2019 生活垃圾宜生化性评价生活垃圾宜生化 —宜燃组分分析方法

 对生活垃圾样品的沼气产量（BG21）、呼吸活性（RA4）或易生化有机质沼气生成量（BGQ）进行测定，根据对应关系得出生活垃圾样品中宜生化有机质的相关参数，以及样品对微生物是否具有抑制作用的信息。同时结合样品的含水率以及灰分对宜燃组分进行计算。 是否具有抑制作用是判断生活垃圾宜生化组分的基础，如具有抑制作用则无需考虑其他因素，则该样品宜生化组分按照零处理。

Biochemical suitability evaluation of domestic waste Biochemical-friendly composition analysis method of domestic waste