13.040.01 空气质量综合 标准查询与下载



共找到 491 条与 空气质量综合 相关的标准,共 33

Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

ICS
13.040.01
CCS
发布
2022-05-01
实施

3.1碳源 (Carbon source) 向大气中释放碳化的母体,分为自然碳源与人为碳源,其中自然碳源是指自然过程释放碳化,人为碳源是指人类生产与生活活动释放二氧化碳。 3.2 碳汇 (Carbon sink) 自然界中碳的寄存体,主要表现为陆地与海洋等吸收并储存二氧化碳的生态系统,包括森林碳汇、海洋碳汇、耕地碳汇、草地碳汇、湿地碳汇等。 3.3 碳达峰 (Carbon emissions peak) 指一个经济体或地区二氧化碳的排放量在某个时间点达到峰值,其核心是碳排放增速持续降低直至负增长。 3.4 碳中和 (Carbon neutral) 通过植树造林、节能减排等形式,以抵消自身产生的二氧化碳排放量,实现碳收支平衡。 4总体要求 4.1城市碳达峰碳中和规划应以城市发展现状调查为基础,对城市总体发展规划以及能源、工业、交通以及土地利用等专项规划进行分析。 4.2重点进行城市工业、交通、建筑、农业、生活消费等领域碳排放清单分析,以及这些领域的碳达峰碳中和路径分析。 4.3制订城市碳达峰碳中和重点领域行动方案。

Technical guidelines for emission peak and carbon neutrality planning in cities

ICS
13.040.01
CCS
N771
发布
2022-03-29
实施
2022-03-30

控制性要求、指标要求。

Classification and evaluation of indoor air quality in civil buildings

ICS
13.040.01
CCS
E485
发布
2022-02-21
实施
2022-04-15

1、本标准适用于民用建筑工程如学校、幼儿园、医院、办公室、宾馆饭店、医院、影剧院、茶社等公共场所及居民住宅全装修成品房销售。   2、标准的主要技术内容包括适用范围、执行标准、材料要求、控制污染工艺、委托检测、资质管理等要求。    3、通过标准的制订,要求开发商在成品房装修时采取控制室内环境污染工艺技术使其室内环境质量达标才能销售,使购房者买到的住房安全健康放心。

Green environmental protection fully decorated finished house enterprise qualification certificati

ICS
13.040.01
CCS
N7820
发布
2022-01-22
实施
2023-02-11

1、本标准适用于民用建筑工程如学校、幼儿园、医院、办公室、宾馆饭店、医院、影剧院、茶社等公共场所及居民住宅新风系统(设备)安装施工工程;也适应于全装修成品房及装饰装修企业加装新风设备的施工工程。   2、标准的主要技术内容包括适用范围、执行标准、等级划分、产品使用、人员素质、硬件设施、检测设备、资质管理等要求。   3、减少因没有安装施工标准规范造成的市场混乱局面,消费者可以准确的选择具备规范安装施工能力的正规企业为其服务。避免假资质盛行欺骗消费者行为发生,以消费者所安装的新风系统达到预期的效果

Guide for classification and evaluation of installation and construction capacity of fresh air sys.

ICS
13.040.01
CCS
A011
发布
2022-01-22
实施
2023-02-11

一、布点 二、采样 三、监测记录 四、计算 五、质量保证与质量控制

Technical specifications for monitoring ammonia emission from the stalls of large-scale livestock and poultry farms

ICS
13.040.01
CCS
N772
发布
2021-12-31
实施
2022-01-06

本标准共包括7章,主要技术内容是:总则、术语、基本规定、材料、设备、施工、运维。

Indoor air quality assurance system evaluation standard

ICS
13.040.01
CCS
N7820
发布
2021-12-24
实施
2023-02-23

本规程适用于江苏省内新建、扩建和改建的民用建筑室内装修工程的环境质量验收。本规程不适用于有特殊净化卫生要求的室内装修工程及民用建筑室内装修工程交付使用后,非建筑装修产生的室内环境质量验收。

Regulations for acceptance of environmental quality of civil building interior decoration engineering

ICS
13.040.01
CCS
P 33
发布
2021-12-22
实施
2022-06-01

Air quality — Particle size fraction definitions for health-related sampling

ICS
13.040.01
CCS
发布
2021-12-16
实施

Air quality — Particle size fraction definitions for health-related sampling

ICS
13.040.01
CCS
发布
2021-12-16
实施

本文件规定了室内空气中甲醛浓度微孔板法测定方法。 本文件适用于室内空气中甲醛浓度测定的微孔板法测定。

Determination of Formaldehyde Concentration in Indoor Air by Microplate Method

ICS
13.040.01
CCS
N772
发布
2021-11-29
实施
2021-12-02

Air quality — Determiniation of the uncertainty of the time average of air quality measurements

ICS
13.040.01
CCS
发布
2021-11-19
实施

Air quality — Determiniation of the uncertainty of the time average of air quality measurements

ICS
13.040.01
CCS
发布
2021-11-19
实施

Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities

ICS
13.040.01
CCS
发布
2021-10-07
实施
2021-10-07

Leakage rate testing method for facepieces of respirstors

ICS
13.040.01
CCS
发布
20210930
实施
20210930

Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter

ICS
13.040.01
CCS
发布
2021-09-23
实施
2021-09-23

本文件规定了室内空气气味评价方法的术语和定义、材料和设备、气味评价实验室要求、人员基本要求、评价方法和试验报告。 本文件适用于室内空气气味的评价。

Assessment method of odour for indoor air

ICS
13.040.01
CCS
C301
发布
2021-09-23
实施
2022-04-06

1.1 This test method provides instruction for using the grab sampling filter technique to determine accurate and reproducible measurements of indoor radon decay product (RDP) concentrations and of the working level (WL) value corresponding to those concentrations. 1.2 Measurements made in accordance with this test method will produce RDP concentrations representative of closedbuilding conditions. Results of measurements made under closed-building conditions will have a smaller variability and are more reproducible than measurements obtained when building conditions are not controlled. This test method may be utilized under non-controlled conditions, but a greater degree of variability in the results will occur. Variability in the results may also be an indication of temporal variability present at the sampling site. 1.3 This test method utilizes a short sampling period and the results are indicative of the conditions only at the place and time of sampling. The results obtained by this test method are not necessarily indicative of longer terms of sampling and should not be confused with such results. The averaging of multiple measurements over hours and days can, however, provide useful screening information. Individual measurements are generally obtained for diagnostic purposes. 1.4 The range of the test method may be considered from 0.0005 WL to unlimited working levels, and from 40 Bq/m3 to unlimited for each individual radon decay product. 1.5 This test method provides information on equipment, procedures, and quality control. It provides for measurements within typical residential or building environments and may not necessarily apply to specialized circumstances, for example, clean rooms. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 9 for additional precautions 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

ICS
13.040.01
CCS
发布
2021-09-01
实施

本文件规定了在线式固态聚合物电化学总挥发性有机物(TVOC)监测仪的组成结构、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于利用固态聚合物电化学气体传感器连续智能监测固定污染源、环境空气中总挥发性有机物(TVOC)气体的仪器。针对不同行业的TVOC特征污染物的监测仪可参照执行本文件。

Online solid polymer electrochemical total volatile organic compounds(TVOC)monitor

ICS
13.040.01
CCS
C402
发布
2021-08-18
实施
2021-08-20

1.1 This guide describes how measured values of indoor carbon dioxide (CO2) concentrations can be used in evaluations of indoor air quality and building ventilation. 1.2 This guide describes the determination of CO2 generation rates from people as a function of body size and level of physical activity. 1.3 This guide describes the experimentally-determined relationship between CO2 concentrations and the acceptability of a space in terms of human body odor. 1.4 This guide describes the following uses of indoor CO2 concentrations to evaluate building ventilation–mass balance analysis to determine the percent outdoor air intake at an air handler, the tracer gas decay technique to estimate whole building air change rates, and the constant injection tracer gas technique at equilibrium to estimate whole building air change rates. 1.5 This guide discusses the use of continuous monitoring of indoor and outdoor CO2 concentrations as a means of evaluating building ventilation and indoor air quality. 1.6 This guide discusses some concentration measurement issues, but it does not include or recommend a method for measuring CO2 concentrations.

Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

ICS
13.040.01
CCS
发布
2021-07-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号