13.040.30 工作场所空气 标准查询与下载

GB 5817-1986 生产性粉尘作业危害程度分级

本标准适用于区分工人接触生产性粉尘作业危害程度的大小，是劳动保护科学管理的依据。本标准不适用于放射性粉尘及引起化学中毒的危害性粉尘。

Classification of hazard levels due to exposure to industrial dust

GB/T 5748-1985 作业场所空气中粉尘测定方法

本标准适用于测定作业场所空气中的粉尘浓度、粉尘中游离二氧化硅含量和粉尘分散度。

Methods for airborne dust measurement in workplace

BS ISO 6323-1:2024 工作场所空气 用电热原子吸收光谱法测定砷和砷化合物 用电子吸收原子吸收光谱法测定砷和砷化合物（砷化氢除外）

Workplace air. Determination of arsenic and arsenic compounds by electrothermal atomic absorption spectrometry - Arsenic and arsenic compounds, except arsine by ET-AAS

24/30483598 DC BS EN 17199-5 工作场所暴露 含有或释放可吸入 NOAA 或其他可吸入颗粒的散装材料的粉尘度测量 第5部分 涡旋振荡器法

BS EN 17199-5 Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA or other respirable particles - Part 5. Vortex shaker method

24/30483595 DC BS EN 15051-3 工作场所暴露 散装材料粉尘含量的测量 第3部分 连续滴落法

BS EN 15051-3 Workplace exposure. Measurement of the dustiness of bulk materials - Part 3. Continuous drop method

T/GACT 0006-2024 洁净室用金属夹芯板

产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存

Metal sandwich panels for cleanrooms

T/SZAS 81-2024 医院场景室内空气质量技术要求

1.范围 2.规范性引用文件 3.术语和定义 4.医院场景室内环境分类 5.医院场景室内空气质量要求 5.1 一般要求 5.2 分类要求： 6. 医院场景室内空气质量测定方法 7. 医院场景室内空气质量测定评价 8. 医院场景室内空气质量治理处置

Technical requirements for indoor air quality in hospital scenes

BS ISO 21438-2:2024 职场氛围 离子色谱法测定无机酸 挥发酸 氢氟酸除外（盐酸、氢溴酸和硝酸）

Workplace atmospheres. Determination of inorganic acids by ion chromatography - Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)

T/QGCML 2436-2023 氟美斯耐高温滤袋

本文件规定了氟美斯耐高温滤袋的术语和定义、要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于氟美斯耐高温滤袋的生产与销售。

Flumes high temperature resistant filter bag

T/CASME 924-2023 工厂车间环境空气净化治理规范

本文件规定了工厂车间环境空气净化治理的总体要求、技术规范、服务规范、检测与验收等方面的内容。

Code for environmental air purification in factory workshops

ASTM E2889-23 金属去除液环境中呼吸危险控制的标准实施规程

1.1 This practice sets forth guidelines to control respiratory hazards in the metal removal environment. 1.2 This practice does not include prevention of dermatitis, which is the subject of Practice E2693, but it does adopt a similar systems management approach with many control elements in common. 1.3 This practice focuses on employee exposure via inhalation of metal removal fluids and associated airborne agents. 1.4 Metal removal fluids used for wet machining operations (such as cutting, drilling, milling, or grinding) that remove metal to produce the finished part are a subset of metalworking fluids. This practice does not apply to other operations (such as stamping, rolling, forging, or casting) that use metalworking fluids other than metal removal fluids. These other types of metalworking fluid operations are not included in this document because of limited information on health effects, including epidemiology studies, and on control technologies. Nonetheless, some of the exposure control approaches and guidance contained in this document may be useful for managing respiratory hazards associated with other types of metalworking fluids. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment

T/SBX 083-2023 氟化氢气体检测报警器校准规范

本文件规定了氟化氢气体检测报警器计量特性、校准条件、校准项目、校准方法、校准结果表达和复校时间间隔的技术要求。 本文件适用于测量范围为0.0 μmol/mol ～10.0 μmol/mol的氟化氢气体检测报警器的校准。

Hydrogen fluoride gas detection alarm calibration specifications

ASTM D4856-23 用混合纤维素酯过滤器收集的工作场所大气中硫酸雾测定的标准试验方法（离子色谱分析）

1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres on a mixed cellulose ester (MCE) filter. NOTE 1—Other filter types such as quartz fiber, polytetrafluoroethylene (PTFE), and polyvinyl chloride (PVC) filters are also suitable. 1.2 The lower detection limit of this test method is 0.001 mg ⁄sample or 0.017 mg ⁄m3 of sulfuric acid (H2SO4) mist in 60 L of air sampled at 1 L/min. 1.3 This test method is subject to interference from soluble and partially soluble sulfate salts. Other sulfur-containing compounds can be oxidized to sulfate and also interfere. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 No detailed instrument operating instructions are provided because of differences among various makes and models of ion chromatography (IC) systems. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument, analytical column, and suppressors used. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 9. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

ASTM D4185-23 用火焰原子吸收分光光度法测量工作场所大气中金属的标准试验方法

1.1 This test method covers the collection, dissolution, and determination of trace metals in workplace atmospheres, by flame atomic absorption spectrophotometry (FAAS). 1.2 The estimated method detection limits and optimum working concentration ranges for 21 metals are given in Table 1. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Specific safety precautionary statements are given in Section 9.) 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

T/CAEPI 72-2023 袋式除尘用折式滤筒技术要求

本文件规定了袋式除尘用折式滤筒的术语和定义、分类与命名、技术要求、检验方法、检验规则，以及标志、包装、运输和贮存。 本文件适用于袋式除尘用折式滤筒。

Technical requirements of pleated cartridge filter for baghouse

T/CAEPI 73-2023 预荷电脉冲袋式除尘器技术要求

本文件规定了预荷电脉冲袋式除尘器的命名、技术要求、检验方法、检验规则及其标志、包装、运输、储存等。 本文件适用于钢铁、有色、机械、建材、工业锅炉等重点工业行业炉窑烟气细颗粒物去除用预荷电脉冲袋式除尘器，其他行业工业烟气细颗粒物去除用预荷电脉冲袋式除尘器可参照执行。

Technical requirements for pre-charged pulse baghouse

T/CAEPI 71-2023 袋式除尘用褶皱滤袋技术要求

本文件规定了袋式除尘用褶皱滤袋分类和命名、技术要求、检验方法、检验规则及标志、包装、运输与贮存等内容。 本文件适用于单一合成纤维滤料或混合合成纤维滤料褶皱滤袋的制造。

Technical requirements for pleated filter bags for bag dust removal

BS ISO 11174:2023 工作场所空气 颗粒镉和镉化合物的测定 火焰电热原子吸收光谱法

1   Scope This document specifies a method for the determination of the mass concentration of particulate cadmium and cadmium compounds in workplace air, using either flame or electrothermal atomic absorption spectrometry. The sample digestion procedure specified in 10.2.2 has been validated [ 2 , 3 ] for a selection of cadmium compounds and pigments and glass enamels containing cadmium. The analytical method has been validated [ 2 ] for the determination of masses of 10 ng to 600 ng of cadmium per sample using electrothermal atomic absorption spectrometry, and 0,15 µg to 96 µg of cadmium per sample using flame atomic absorption spectrometry. [ 3 ] The concentration range for cadmium in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user. The method is applicable to personal sampling of the inhalable or respirable fraction of airborne particles, as defined in ISO 7708, and to stationary sampling.

Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electrothermal atomic absorption spectrometric method

T/CAB 0253-2023 生物气溶胶监控处置系统应用技术规程 第1部分：国境口岸

本标准在充分总结以上标准的基础上，根据当前及未来生物气溶胶监测技术的发展需求，结合我国国境口岸实际情况，重点突出了监测系统的生物气溶胶监测预警装置，生物气溶胶采样器，生物危害因子检测工作站和生物危害因子消杀器，其中监控系统包含可视化监控处置系统，以及串联两者的云端服务器等方面的内容，保证后疫情时代背景下国境口岸生物气溶胶监测工作能够适应当前形势下的发展的需要。

Code of practice for the application of the monitoring and disposal system of bioaerosol Part 1: Border port

ISO/FDIS 21438-2:2023 工作场所气氛 离子色谱法测定无机酸 第2部分：挥发性酸 氢氟酸除外（盐酸、氢溴酸和硝酸）

Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)