13.040.30 工作场所空气 标准查询与下载

ASTM E1132-21 与职业接触可吸入结晶二氧化硅有关的健康要求的标准实施规程

1.1 This practice covers a description of several actions that should be taken to reduce the risk of harmful occupational exposures to humans in environments containing respirable crystalline silica. This practice is intended for, but not limited to, industries regulated by the U.S. Mine Safety and Health Administration (MSHA) and the U.S. Occupational Safety and Health Administration (OSHA). A separate practice designed for the unique conditions of the construction industry has been designated Practice E2625. 1.2 Nothing in this practice shall be interpreted as requiring any action that violates any statute or requirement of any federal, state, or other regulatory agency. 1.3 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica

DS/ISO 23875:2021 采矿 – 操作员外壳的空气质量控制系统 – 性能要求和测试方法

Mining – Air quality control systems for operator enclosures – Performance requirements and test methods

LST EN 14031-2021 工作场所暴露 空气中内毒素的定量测量

Workplace exposure - Quantitative measurement of airborne endotoxins

UNI EN 14031-2021 工作场所暴露 空气中内毒素的定量测量

Workplace exposure - Quantitative measurement of airborne endotoxins.

DS/ISO 24095:2021 工作场所空气 可吸入结晶二氧化硅测量指南

Workplace air – Guidance for the measurement of respirable crystalline silica

T/ZQCSH 010-2021 车展大厅空气质量控制要求

1  范围 2  规范性引用文件 3  术语和定义 4  基本要求 5  污染物 6  来源 7  控制措施 附录A（资料性）  空气质量监测记录表

Air quality control requirements for auto show halls

BS ISO 24095:2021 工作场所空气 可吸入结晶二氧化硅的测量指南

Workplace air. Guidance for the measurement of respirable crystalline silica

ASTM D7659-21 工人保护用金属和类金属表面取样策略的标准指南

1.1 This guide provides criteria to be used in defining strategies for sampling for metals and metalloids on surfaces for workplace health and safety monitoring or evaluation. 1.2 Guidance provided by this standard is intended for sampling of metals and metalloids on surfaces for subsequent analysis using methods such as atomic spectrometry, mass spectrometry, X-ray fluorescence, or molecular fluorescence. Guidance for evaluation of data after sample analysis is included. 1.3 Sampling for volatile organometallic species (for example, trimethyl tin) is not within the scope of this guide. 1.4 Sampling to determine levels of metals or metalloids on the skin is not within the scope of this guide. 1.5 Sampling for airborne particulate matter is not within the scope of this guide. Guide E1370 provides information on air sampling strategies. 1.6 Where surface sampling is prescribed by law or regulation, this guide is not intended to take the place of any requirements that may be specified in such law or regulation. 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

ASTM D7439-21 用电感耦合等离子体质谱法测定空气颗粒物中元素的标准试验方法

1.1 This test method specifies a procedure for sample preparation and analysis of airborne particulate matter for the content of metals and metalloids in workplace air samples using inductively coupled plasma–mass spectrometry (ICPMS). This test method can be used for other air samples provided the user ensures the validity of the test method (by ensuring that appropriate data quality objectives can be achieved). 1.2 This test method assumes that samples will have been collected in accordance with Test Method D7035 with consideration of guidance regarding wall deposits provided in Guide D8358. 1.3 This test method should be used by analysts experienced in the use of ICP-MS, the interpretation of spectral and matrix interferences and procedures for their correction. 1.4 This test method specifies a number of alternative methods for preparing test solutions from samples of airborne particulate matter. One of the specified sample preparation methods is applicable to the measurement of soluble metal or metalloid compounds. Other specified methods are applicable to the measurement of total metals and metalloids. 1.5 It is the user’s responsibility to ensure the validity of this test method for samples collected from untested matrices. 1.6 Table 1 provides a non-exclusive list of metals and metalloids for which one or more of the sample dissolution methods specified in this document is applicable. 1.7 This test method is not applicable to compounds of metals and metalloids that are present in the gaseous or vapor state. 1.8 Table 3 provides examples of instrumental detection limits (IDL) that can be achieved with this test method. Table 5 provides examples of method detection limits (MDL) that can be achieved. 1.9 No detailed operating instructions are provided because of differences among various makes and models of suitable ICP-MS instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This test method does not address comparative accuracy of different devices or the precision between instruments of the same make and model. 1.10 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.11 This test method contains notes that are explanatory and are not part of the mandatory requirements of the method. 1.12 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.13 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

ASTM D8404-21 金属和类金属后续分析用氟化氢铵硝酸消化制备土壤样品的标准实施规程

1.1 This practice covers drying, homogenization, and ammonium bifluoride-nitric acid digestion of soil samples and associated quality control (QC) samples for the determination of metals and metalloids using laboratory atomic spectrometry analysis techniques such as inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectrometry (ICP-AES), flame atomic absorption spectrometry (FAAS), and graphite furnace atomic absorption spectrometry (GFAAS). For ammonium bifluoride-nitric acid digestion of airborne dust and dust-wipe samples for the determination of metals and metalloids, see Practice D8344. 1.2 This practice is based on U.S. EPA SW 846, Test Method 3050, Test Method D7202, and Practice D8344. 1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of this standard. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids

ASTM E1370-21 工人和工作场所保护用空气取样策略的标准指南

1.1 This guide describes criteria to be used in defining air sampling strategies for workplace health and safety monitoring or evaluation. Sampling criteria such as duration, frequency, number, location, method, equipment, and timing are all considered. 1.2 Where air sampling is prescribed by law or regulation, this guide is not intended to take the place of any requirements that may be specified in such law or regulation. 1.3 Guidance for surface sampling strategies for metals and metalloids is provided in Guide D7659. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

ASTM D7202-21 用萃取和光学荧光检测法测定工作场所中铍的标准试验方法

Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

ISO 24095:2021 工作场所空气. 适于呼吸的结晶二氧化硅的测定指南

This document gives guidelines for the measurements of respirable crystalline silica in air using direct on-filter or indirect X-ray diffraction and infrared analysis methods, including quality aspects of the measurements. The scope of this document includes the following crystalline silica polymorphs: quartz and cristobalite. These guidelines are intended for use in conjunction with the following specific analytical methods under the jurisdiction of ISO TC 146 SC 2: ISO 16258-1, ISO 16258-2, and ISO 19087. When used with any of these documents, this guidance will help to ensure measurement procedures meet the uncertainty requirements stipulated in ISO 20581, to enable the results to be compared to occupational exposure limit values (OELV) in accordance with EN 689[40]. These guidelines are also relevant to the analysis of filters obtained from dustiness measurements in accordance with EN 15051[1] and EN 17289[35].

Workplace air - Guidance for the measurement of respirable crystalline silica

DIN EN 14031:2021 工作场所暴露 空气中内毒素的定量测量；德文版 EN 14031:2021

This document specifies a routine method for the quantitative measurement of airborne endotoxins and gives general requirements for sampling, transportation and storage of samples.This document provides also guidelines for the assessment of workplace exposure to airborne endotoxi

Workplace exposure - Quantitative measurement of airborne endotoxins; German version EN 14031:2021

PN Z04531-2021-08 P 空气纯度保护 火焰离子化气相色谱法测定工作场所邻苯二甲酸二甲酯

Air purity protection -- Determination of dimethyl phthalate in workplaces by gas chromatography with flame-ionization detection

BS EN IEC 62990-2:2021 工作场所氛围 气体探测器 有毒气体和蒸汽探测器的选择、安装、使用和维护

Workplace atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for toxic gases and vapours

OENORM EN 482-2021 工作场所暴露 化学试剂浓度测定程序 基本性能要求

Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements

prEN ISO 23861:2021 工作场所空气 以空气中颗粒和蒸汽的混合物形式存在的化学试剂 使用取样器评估测量程序的要求（ISO/DIS 23861:2021）

Workplace air - Chemical agent present as a mixture of airborne particles and vapours - Requirements for evaluation of measuring procedures using samplers (ISO/DIS 23861:2021)

FprEN 14583-2021 工作场所暴露 体积生物气溶胶采样器 一般要求和性能评估

Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance

SN EN 14031-2021 工作场所暴露 空气中内毒素的定量测量

Workplace exposure - Quantitative measurement of airborne endotoxins