13.060.10 天然水资源 标准查询与下载
共找到 305 条与 天然水资源 相关的标准，共 21 页
本标准规定了测定大气降水中氟化物的氟试剂光度法。 本标准适用于大气降水样品中氟化物的测定。 本标准最低检出浓度为0.05mg/L，测定范围为0.06～1.5mg/L。
Determination of fluoride in the wet precipitation.Fluor reagent spectrophotometry
- ICS
- 13.060.10
- CCS
- Z10
- 发布
- 1992-02-01
- 实施
- 1993-03-01
本标准规定了水源水中百菌清的最高容许浓度。 本标准适用于生产和使用百菌清周围的生活饮用水源水，以及大面积喷洒百菌清森林地区的生活饮用水源水。
Hygienic standard for chlorothalonile in drinking water sources
- ICS
- 13.060.10
- CCS
- C51
- 发布
- 1989-02-10
- 实施
- 1990-07-01
本文件规定了河流水生态系统修复的术语与定义、总体原则、总体要求、河道生境多样性保护修复、河道生态流量保障和水动力调控、河道基底修复、河道水质原位强化净化、河流生物多样性恢复、面源污染滞留拦截净化等技术内容和要求，以及水文化传承与营造、工程成效评估、工程运行维护等要求。
Technical specifications for river ecosystem restoration
- ICS
- 13.060.10
- CCS
- N771
- 发布
- 2024-04-09
- 实施
- 2024-04-16
Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
- ICS
- 13.060.10
- CCS
- 发布
- 2024-03-01
- 实施
- 2024-03-01
Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
- ICS
- 13.060.10
- CCS
- 发布
- 2024-02-15
- 实施
Standard Guide for Field Filtration of Groundwater Samples
- ICS
- 13.060.10
- CCS
- 发布
- 2024-02-01
- 实施
1.1 This test method covers the testing of hydrodynamic stormwater separators and underground settling devices as it relates to the measurement of the resuspension and washout (scour) of previously captured sediment. 1.2 Units tested shall be of a size commonly manufactured and available for purchase. In order to facilitate testing it is permissible to substitute alternate materials for the housing and structural components of the test units if operational components are at full size, with identical dimensions, configurations and materials specified for commercial use. Scale models are not permissible. 1.3 The test method provides a means of evaluating retention of suspended solids previously captured with a manufactured treatment device (MTD) that is placed as an offline or online treatment device along storm drain pipe lines. It provides criteria in which to evaluate whether the MTD is appropriate for installation in offline or online conditions. 1.4 This test method provides the means for evaluating the scour potential for both offline and online conditions. 1.5 Units— The values stated in inch-pound units are to be regarded as standard, except for methods to establish and report sediment concentration and particle size. It is convention to exclusively describe sediment concentration in mg/L and particle size in mm or μm, both of which are SI units. The SI units given in parentheses are mathematical conversions, which are provided for information purposes only and are not considered standard. Reporting of test results in units other than inch-pound units shall not be regarded as non-conformance with this test method. 1.6 This test method may be subject to specific requirements set by a Quality Assurance Project Plan, a specific verification protocol, or Authority Having Jurisdiction (AHJ). It is advised to review one or all of the above to ensure compliance 1.7 Acceptance of test results attained according to this specification may be subject to specific requirements set by a Quality Assurance Project Plan, a specific verification protocol, or Authority Having Jurisdiction (AHJ). It is advised to review one or all of the above to ensure compliance. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Scour of Hydrodynamic Separators and Settling Devices
- ICS
- 13.060.10
- CCS
- 发布
- 2024-01-22
- 实施
Technical management specifications for culvert engineering
- ICS
- 13.060.10
- CCS
- Z 04
- 发布
- 2024-01-09
- 实施
- 2024-02-09
Evaluation Standards for Happy Rivers and Lakes
- ICS
- 13.060.10
- CCS
- Z 75
- 发布
- 2024-01-09
- 实施
- 2024-02-09
Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
- ICS
- 13.060.10
- CCS
- 发布
- 2024-01-01
- 实施
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
- ICS
- 13.060.10
- CCS
- 发布
- 2023-12-01
- 实施
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
- ICS
- 13.060.10
- CCS
- 发布
- 2023-12-01
- 实施
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
- ICS
- 13.060.10
- CCS
- 发布
- 2023-12-01
- 实施
Guidelines for standardized management of water conservation for planned water users
- ICS
- 13.060.10
- CCS
- P40
- 发布
- 2023-11-07
- 实施
- 2023-12-07
Standard Guide for Field Preservation of Ground Water Samples
- ICS
- 13.060.10
- CCS
- 发布
- 2023-11-01
- 实施
Standard Guide for Documenting a Groundwater Sampling Event
- ICS
- 13.060.10
- CCS
- 发布
- 2023-11-01
- 实施
Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
- ICS
- 13.060.10
- CCS
- 发布
- 2023-11-01
- 实施
Specifications for water resources demonstration for hydrothermal geothermal heating construction projects
- ICS
- 13.060.10
- CCS
- P 13
- 发布
- 2023-09-15
- 实施
- 2024-04-01
本文件规定了幸福河湖评价原则、评价对象、评价指标、评价方法、评价工作流程及评价报告内容等。 本文件适用于幸福河湖的评价。
Happy Rivers and Lakes Evaluation Guidelines
- ICS
- 13.060.10
- CCS
- Z 06
- 发布
- 2023-07-31
- 实施
- 2023-08-31
Technical Guidelines for Assessment and Review of Groundwater Overexploitation Control
- ICS
- 13.060.10
- CCS
- P 13
- 发布
- 2023-07-28
- 实施
- 2023-08-28
