13.080.05 土壤检验综合 标准查询与下载

GB/Z 41358-2022 土壤健康综合表征的生物测试方法

本文件给出了土壤健康综合表征的四季豆根系形态测试法、发光细菌生物测试法、线虫群落生物测试方法、蚯蚓生物测试法等生物测试方法的原理、采样、测试等,以及测试报告的要求。 本文件适用于耕地、园地、草地土壤健康程度的生物测试。

Biological test methods for comprehensive characterization of soil health

GB/T 23739-2009 土壤质量.有效态铅和镉的测定.原子吸收法

本标准规定了土壤中有效态铅和镉的原子吸收光谱测定方法。 本标准适用于土壤中有效态铅和镉的测定。

Soil quality.Analysis of available lead and cadmium contents in soils.Atomic absorption spectrometry

GB/T 22105.3-2008 土壤质量.总汞、总砷、总铅的测定.原子荧光法.第3部分:土壤中总铅的测定

GB/T 22105的本部分规定了土壤中总铅的原子荧光光谱测定方法。 本部分适用于土壤中总铅的测定。 本部分方法检出限为0.06mg/kg。

Soil quality.Analysis of total mercury,arsenic and lead contents.Atomic fluorescence spectrometry.Part3:Analysis of total lead contents in soils

24/30463824 DC BS ISO 18386 土壤质量 土壤温度筛查方法 红外温度计测量

BS ISO 18386 Soil quality - Screening method for soil temperature - Measurement by IR thermometer

ASTM E1728/E1728M-24 随后铅测定用擦拭取样法收集沉降灰尘样品的标准实施规程

1.1 This practice covers the collection of settled leadcontaining dust on surfaces using the wipe sampling method. These samples are collected in a manner that will permit subsequent extraction (see Practices E1644 and E1979) and determination of lead using laboratory analysis techniques such as atomic spectrometry (see Test Methods E3193/E3193M and E3203). For collection of settled dust samples for determination of lead and other metals, use Practice D6966. 1.2 This practice does not address the sampling design criteria (that is, sampling plan which includes the number and location of samples) that are used for clearance (see Practices E2271/E2271M and E3074/E3074M), lead hazard evaluation, or risk assessment (see Guide E2115), and other purposes. To provide for valid conclusions, sufficient numbers of samples should be obtained as directed by a sampling plan. 1.3 This practice contains notes that are explanatory and are not part of the mandatory requirements of this practice. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

DB13/T 5926-2024 土壤和沉积物 锡、钡的测定 电感耦合等离子体质谱法

Soil and sediment Determination of tin and barium Inductively coupled plasma mass spectrometry

T/GBC 13-2024 土壤检测机构电子原始记录溯源管理规范

土壤检测机构电子原始记录溯源管理的术语和定义、技术要求和安全保护等技术内容。

Specification for electronic original records traceability management of soil testing institution

T/GBC 11-2024 土壤检测机构视频影像管理技术规范

土壤检测机构视频影像追溯管理的术语和定义、视频影像设备和技术要求。

Technical specifications for video image management of soil testing institution

T/GBC 12-2024 土壤检测机构样品流转管理要求

土壤检测机构样品流转的术语和定义、采集标识、保存运输、样品交接、样品制备、样品留样、样品送检等流转技术要求。

Requirement for sample circulation management of soil testing institution

T/GBC 14-2024 土壤检测机构租赁设备溯源管理规范

土壤检测机构租赁设备溯源管理的术语和定义，租用设备使用条件、租用设备管理、租用设备数据保存等技术要求。

Specification for traceability of rental equipment management of soil testing institution

ASTM D6914/D6914M-16(2024) 现场表征和地下监测装置安装用声波钻孔的标准实施规程

Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

T/CASME 959-2023 储气井土壤腐蚀检测技术方法

本文件规定了储气井土壤腐蚀检测技术方法的基本原则、现场采样、土壤数据分析、土壤腐蚀模拟实验等内容。

Technical method of soil corrosion detection in gas storage Wells

DB43/T 2787-2023 湖南省中高海拔山地植被恢复技术规程

Technical Regulations for Vegetation Restoration of Medium and High Altitude Mountains in Hunan Province

ASTM D4646-16(2023) 24的标准试验方法 h土壤和沉积物污染物吸附的分批式测量

Standard Test Method for 24 h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments

ISO 18400-301:2023 土壤质量取样第301部分:现场调查中挥发性有机化合物的取样和现场半定量测定

This document provides specific requirements and recommendations on soil sampling and semi- quantitative measurements in field investigations for volatile organic compounds (VOCs) that are not explicitly covered in the existing ISO 18400 series. In addition, it provides information on the preparation steps (choosing a sampling strategy, defining a sampling plan); describes sampling techniques (drilling techniques, sampling devices and procedures) and field measurements; and gives advice on conservation, packaging, transport and delivery to the laboratory in the context of VOCs (see soil sampling process described in Figure 2). VOCs to which this document can be applied include: — volatile aromatic hydrocarbons such as benzene, toluene, ethylbenzene, naphthalene; — aliphatic ethers such as methyl tert.-butyl ether(MTBE), ethyl tert.-butyl ether (ETBE) and tert.- amyl methyl ether (TAME); — volatile halogenated hydrocarbons such as tetrachloroethene and, trichloroethene. The document does not cover the volatile non-organic compounds. However, some information about these is provided in Annex D. This document provides requirements and guidance on the selection of drilling and sampling techniques for determining VOCs and how to use them. It clarifies the applicability and limits of the drilling and sampling techniques, taking into account the physical, chemical or biological reactions that can occur in soil. This document gives requirements and recommendations on the use of instrumental measurement techniques for determination of VOC concentrations in air, firstly in relation to worker safety, and subsequently for semi-quantitative measurements of volatiles during soil sampling. The following subjects are outside the scope of this document: — direct quantitative measurement of volatile compounds by field analysis laboratories; — investigations and evaluation of soil gas quality (these are dealt with ISO 18400 204); — safety risk assessment; and — analytical procedures.

Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations

ASTM E2993-23 评估由渗流区甲烷引起的建筑物潜在危险的标准指南

1.1 This guide provides a consistent basis for assessing methane in the vadose zone, evaluating hazard and risk, determining the appropriate response, and identifying the urgency of the response. 1.2 Purpose—This guide covers techniques for evaluating potential hazards associated with methane present in the vadose zone beneath or near existing or proposed buildings or other structures (for example, potential fires or explosions within the buildings or structures), when such hazards are suspected to be present based on due diligence or other site evaluations (see 6.1.1). Buildings in this context include normal below grade utilities associated with a building. 1.3 Objectives—This guide: (1) provides a practical and reasonable industry standard for evaluating, prioritizing, and addressing potential methane hazards based on mass flow and (2) provides a tool for screening out low-risk sites. 1.4 This guide offers a set of instructions for performing one or more specific operations. This guide cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This guide is not intended to represent or replace the standard of care by which the adequacy of a given professional service should be judged, nor should this guide be applied without consideration of a project’s many unique aspects. The word “Standard” in the title means only that the guide has been approved through the ASTM International consensus process. 1.5 Not addressed by this guide are: 1.5.1 Requirements or guidance or both with respect to methane sampling or evaluation in federal, state, or local regulations. Users are cautioned that federal, state, and local guidance may impose specific requirements that differ from those of this guide; 1.5.2 Safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use; 1.5.3 Emergency response situations such as sudden ruptures of gas lines or pipelines; 1.5.4 Methane entry into an enclosure from other than vadose zone soils (for example, methane evolved from well water brought into an enclosure; methane generated directly within the enclosure; groundwater intrusion, methane from leaking natural gas lines or appliances within the enclosure, direct migration into buildings from mine entries, etc.); 1.5.5 Methane entry into an enclosure situated atop or immediately adjacent to a municipal solid waste (MSW) landfill or a Construction and Demolition (C&D) landfill; 1.5.6 Methane from oil & gas reservoirs, injection wells, or other sources potentially under high pressures relative to typical vadose zone pressures; 1.5.7 Methane risk during construction activities, work in trenches, and confined space work (which are all best addressed via real-time monitoring); 1.5.8 Potential hazards from other gases and vapors that may also be present in the subsurface such as hydrogen sulfide, carbon dioxide, and/or volatile organic compounds (VOCs); 1.5.9 Anoxic conditions in enclosed spaces; 1.5.10 The forensic determination of methane source; or 1.5.11 Potential consequences of fires or explosions in enclosed spaces or other issues related to safety engineering design of structures or systems to address fires or explosions. 1.6 Units—The values stated in SI units are to be regarded as the standard. 1.6.1 Exception—Values in inch/pound units are provided for reference. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This guide is under the jurisdiction of ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action and is the direct responsibility of Subcommittee E50.02 on Real Estate Assessment and Management. Current edition approved Sept. 1, 2023. Published November 2023. Originally approved in 2016. Last previous edition approved in 2016 as E2993–16. DOI: 10.1520/E2993–23 Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Evaluating Potential Hazard in Buildings as a Result of Methane in the Vadose Zone

ISO/PRF 21268-5:2023 土壤质量 土壤和类土材料后续化学和生态毒理学测试的浸出程序 第 5 部分：强制需氧或厌氧条件下的批量测试

Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials — Part 5: Batch test with forced aerobic or anaerobic conditions

BS ISO 4974:2023 土壤质量 土壤温度测量指南

Soil quality. Guidance on soil temperature measurement

ISO/FDIS 18400-301:2023 土壤质量采样第301部分：现场调查中挥发性有机化合物的采样和现场半定量测定

Soil quality — Sampling — Part 301: Sampling and on site semi-quantitative determinations of volatile organic compounds in field investigations

ISO 4974:2023 土壤质量 土壤温度测量指南

This document outlines methodologies for soil temperature measurement and provides guidance on the selection of a measurement method depending on measurement purposes. It also gives guidance on characteristics, performance and use of infrared (IR) thermometers which is now widely applied to obtain rapid measurements and thermistors which have been commonly used to obtain more accurate measurements.

Soil quality — Guidance on soil temperature measurement