13.160 振动和冲击(与人有关的) 标准查询与下载

GSO ISO 9996:2013 机械振动和冲击 对人类活动和性能的干扰 分类

This International Standard lays down a simple classification of motion- and vibration-sensitive human activity and task performance. The classification includes, and is intentionally limited to, volitional human activity and task performance known or presumed to be disturbed, degraded or disrupted by continuous, intermittent, transient, or repetitive oscillatory motion or vibration (including shock motion) of human beings, components of their task, or their surroundings. This classification applies only to volitional human activities and tasks, interference with which by motion or vibration is presumed to be mediated by direct mechanical intrusion, physiological (non-injurious) changes in the person affected, or reversible sensory impairment, distortion, or conflict caused by the motion or vibration. It does not extend to activity or performance reduction associated with disability due to motion- or vibration-related injury. This International Standard is intended specifically to be an aid in the formulation of standard guidelines for the evaluation of human whole-body exposure to mechanical vibration and shock in the frequency range 0,1 Hz to 80 Hz, when optimization of human activity and task performance in the mechanical environment is the main criterion of evaluation. NOTE 1 This International Standard also provides definitions of specialized terms, not defined in other standard vibration and shock vocabularies, that find a particular use in human biodynamics relating to task performance. It therefore supplements the biodynamical vocabulary in ISO 5805.

Mechanical vibration and shock -- Disturbance to human activity and performance -- Classification

GSO ISO/TR 25398:2013 土方机械 估计乘坐机器时全身振动的爆炸性的证据 使用国际机构、组织和制造商测量的统一数据

This Technical Report provides guidelines for those such as employers, national authorities and manufacturers of earth-moving machinery who are required to determine, assess and document the daily whole-body vibration exposure for ride-on machines as defined in ISO 6165. It also provides guidelines for reducing vibration levels on machines and for determining the vibration reduction from machine improvements to reduce vibration levels. It is intended to assist in establishing documentation for specific earth-moving machinery under typical operating conditions. It gives guidance on determining the daily vibration exposure A(8), in accordance with ISO 2631 and EN 14253, offering a simple method for determining the daily vibration exposure by means of a table which indicates the daily exposure as a function of the equivalent vibration total value and the associated exposure duration. Both methods can be used even in cases of multiple exposures on the same day. Methods are provided for calculating exposure using reported emission values, valid for machines equipped with a seat in accordance to ISO 7096. NOTE Additional information is given in the EN 474 and EN 500 series of standards. Workplace measurements are required where suitable data are unavailable to represent the vibration under the specific working conditions, or if the calculation results are not useful for determining whether or not the vibration exposure limit value or exposure action value is likely to be exceeded. It is important that the vibration values used in the exposure assessment are representative of those in the specific use of the machines. This Technical Report does not deal with assessments of exposure to shock. NOTE The guidelines for determining, assessing and documenting the daily vibration exposure from use of ride-on operated earth-moving machinery also cover the requirements of the European Physical Agents Directive (Vibration) 2002/44/EC.

Earth-moving machinery -- Guidelines for assessment of exposure to whole-body vibration of ride-on machines -- Use of harmonized data measured by international institutes, organizations and manufacturers

DS/ISO 10068:2013 机械振动和冲击 驱动点处人体手臂系统的机械阻抗

This International Standard describes the mechanical impedance of the human male hand-arm system at the driving point. Values of the impedance, expressed as modulus and phase, are provided for three orthogonal, translatory directions of excitation that co

Mechanical vibration and shock - Mechanical impedance of the human hand-arm system at the driving point

DS/CEN/TR 16391:2013 机械振动和冲击 手传振动 手机界面耦合力对暴露评估的影响

This Technical Report provides an overview of the current state of knowledge on the relationship between vibration exposures, coupling forces and damage to the hand-arm system. It provides general guidance on how to build the reduction of coupling forces

Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation

KS B ISO 13091-1:2013 机械振动.评定神经官能紊乱用振动感知阈值.第1部分:指尖测量法

이 표준은 손가락 끝에서의 진동 감촉 감지 역치(VPT)의 측정 방법과 측정 수행 절차 및 결과 보고사항에 대하여 규정한다.이 표준에서는 SAI, FAI, FAII로 분류되어 있는 감각 수용기 분류군에서 손가락 끝에 전달된 감지역치(경계값)를 얻기 위한 측정 방법을 정의한다. 이 방법은 건강한 사람이나 질병을 앓고 있는사람에게 적용할 수 있으며 임상 평가와 검사 목적으로 쓰일 수 있다.진동 감촉 감지 역치(경계값)가 변동하는 임시 측정이나 손가락 끝이 아닌 신체의 다른 부위의측정은 이 표준의 적용범위를 벗어난다.

Mechanical vibration-Vibrotactile perception thresholds for the assessment of nerve dysfunction-Part 1:Methods of measurement at the fingertips

KS B ISO 8041-2013 人体对振动测量仪器的反应

Human response to vibration－Measuring instrumentation

KS B ISO 8041:2013 人体振动.测量仪

이 표준은 진동에 대한 인체의 반응을 평가하기 위한 목적으로 행해지는 진동값을 측정하기 위하여설계되는 기기에 대한 성능 명세서와 공차 한계에 대하여 규정한다. 이 표준에는 패턴 평가를 위한요건, 정기 검사, 현장 검사 및 현장 검사를 위한 진동 교정기의 표준을 포함하고 있다.이 표준에 의해 규정된 진동장치는 단일 장치 또는 장치들의 조합이거나 컴퓨터를 기반으로 한 수집과 분석 시스템임을 규정한다.이 표준에 상술되어 있는 진동 기구는 다음과 같이 하나 혹은 그 이상의 응용범위에 대해 진동을 측정하고자 하는 데 목적을 두고 있다.― 손으로 전달된 진동(KS B ISO 5349-1 참조)― 전신진동(KS B ISO 2631-1, KS B ISO 2631-2, KS B ISO 2631-4 참조)― 주파수 0.1 Hz~0.5 Hz의 저주파 전신진동(KS B ISO 2631-1 참조)진동장치는 이러한 응용 범위에서 정의된 하나 또는 그 이상의 주파수 가중에 따라 측정을 수행할수 있도록 설계할 수 있다.성능 평가의 세 가지 수준은 이 표준에서 아래와 같이 정의한다.a) 패턴 평가:이 표준에 의해 정의된 표준에 대한 장치의 모든 검사b) 정기 검사:장치가 요구되는 성능 명세를 만족하는지 여부를 보증할 수 있도록 설계된 중간 수준의 검사c) 현장 검사:장치가 요구되는 성능 명세를 만족하는

Human response to vibration－Measuring instrumentation

PD CEN/TR 15350:2013 机械振动.对手感振动,包括由机械制造商提供的信息的评估指南

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery

KS B ISO 2631-4:2013 机械振动和冲击.对人体受全身振动的评估.第4部分:在固定导轨运输系统中振动和转动对乘客和乘务员舒适度影响的评估导则

이 표준은 고정된 안내 경로 시스템의 승객 및 승무원의 안락도에 대한 기계 진동의 영향 평

Mechanical vibration and shock－Evaluation of human exposure to whole-body vibration－Part 4：Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

DIN 45679:2013 机械振动.遭受振动的手臂体系评定用夹紧力和进刀力的测量和评价

Mechanical vibration.Measurement and evaluation of coupling forces for assessment of vibration exposure of the hand-arm system

DIN SPEC 45697 Berichtigung 1:2013 机械振动和冲击 冲击性整体振动的评估方法

Mechanical vibration and shock - Method for evaluation of impulsive whole-body vibration; with CD-ROM, Corrigendum to DIN SPEC 45697:2012-06

BS ISO 10068:2013 机械振动与冲击.人体手臂系统驱动点的机械阻抗

Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point

DS/EN ISO 20643/A1:2013 机械振动 手持式和手持式机械 振动发射评估原则 修正案 1：加速度计位置

This document provides the basis for the drafting of vibration test codes for hand-held and hand-guided powerdriven machinery. It specifies the determination of hand-transmitted vibration emission in terms of frequencyweighted root-mean-square (r.m.s.) ac

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions

KS B 0722-2012 机械振动和冲击-人体在z方向的机械传递率

Mechanical vibration and shock-Mechanical transmissibility of the human body in the z direction

ISO 10068:2012 机械振动与冲击.人体手臂系统驱动点的机械阻抗

Mechanical vibration and shock - Mechanical impedance of the human hand-arm system at the driving point

DIN EN ISO 20643:2012 机械振动.手持式和手控式机械.振动传导的评估原则(ISO 20643-2005 + Amd. 1-2012).德文版本EN ISO 20643-2008 + A1-2012

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012); German version EN ISO 20643:2008 + A1:2012

SL 88-2012 水质.叶绿素的测定.分光光度法

本标准规定了测定水中叶绿素的分光光度法。 本标准适用于地表水中叶绿素的测定。 当水样体积为300mL、使用1cm比色皿时，叶绿素a的检出限为0.11μg/L，测定下限为0.5μg/L；叶绿素b的检出限为0.25μg/L，测定下限为1.0μg/L；叶绿素c的检出限为0.25μg/L，测定下限为1.0μg/L.

Water quality.Determination of chlorophyll by spectrophotometry

EN ISO 20643:2008/A1:2012 机械振动.手持式和手控式机械.振动传导评估原则 包含修改件A1,2012

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)

ISO/TR 10687:2012 机械振动.与全身性振动相关的坐姿测定和描述

Mechanical vibration - Description and determination of seated postures with reference to whole-body vibration

DIN SPEC 45697:2012 机械振动和冲击 冲击性整体振动的评估方法

Mechanical vibration and shock - Method for evaluation of impulsive whole-body vibration; with CD-ROM